Nissan Rogue. Manual — part 1165
TM-32
< SYSTEM DESCRIPTION >
[CVT: RE0F10D]
SYSTEM
*: If these input/output signals show errors, TCM activates the fail-safe function.
CVT CONTROL SYSTEM : Fail-safe
INFOID:0000000011279272
TCM has a fail-safe mode. The mode functions so that operation can be continued even if the signal circuit of
the main electronically controlled input/output parts is damaged.
If the vehicle shows following behaviors including “poor acceleration”, a malfunction of the applicable system
is detected by TCM and the vehicle may be in a fail-safe mode. At this time, check the DTC code and perform
inspection and repair according to the malfunction diagnosis procedures.
Fail-safe function
Control Item
Shift control
Line pressure
control
Select control
Lock-up con-
trol
Fail-safe func-
tion*
Input
Engine torque signal
(CAN communication)
×
×
×
×
×
Engine speed signal
(CAN communication)
×
×
×
×
×
Accelerator pedal position signal
(CAN communication)
×
×
×
×
Closed throttle position signal
(CAN communication)
×
×
×
Stop lamp switch signal
(CAN communication)
×
×
×
×
Primary pressure sensor
×
Secondary pressure sensor
×
×
×
CVT fluid temperature sensor
×
×
×
×
×
Primary speed sensor
×
×
×
×
×
Output speed sensor
×
×
×
×
Input speed sensor
×
×
×
×
×
Transmission range switch
×
×
×
×
×
Overdrive control switch
(CAN communication)
×
×
×
Output
Line pressure solenoid valve
×
×
×
×
Primary pressure solenoid valve
×
×
×
Torque converter clutch solenoid
valve
×
×
Secondary pressure solenoid valve
×
×
×
Select solenoid valve
×
×
×
Shift position indicator
(CAN communication)
×
O/D OFF indicator lamp
(CAN communication)
×
DTC
Vehicle behavior
Conditions of vehicle
P062F
Not changed from normal driving
—
P0705
• Shift position indicator on combination meter is not dis-
played
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
SYSTEM
TM-33
< SYSTEM DESCRIPTION >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
P0706
• Shift position indicator on combination meter is not dis-
played
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0711
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine start:
Temp.
≥ 10°C (50°F)
• Selector shock is large
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine start:
−35°C (−31°F) ≤ Temp. < 10°C (50°F)
• Selector shock is large
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine star:
Temp. <
−35°C (−31°F)
P0712
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine start:
Temp.
≥ 10°C (50°F)
• Selector shock is large
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine start:
−35°C (−31°F) ≤ Temp. < 10°C (50°F)
• Selector shock is large
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine star:
Temp. <
−35°C (−31°F)
P0713
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine start:
Temp.
≥ 10°C (50°F)
• Selector shock is large
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine start:
−35°C (−31°F) ≤ Temp. < 10°C (50°F)
• Selector shock is large
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine star:
Temp. <
−35°C (−31°F)
P0715
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0717
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0740
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0743
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0744
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0746
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
DTC
Vehicle behavior
Conditions of vehicle
TM-34
< SYSTEM DESCRIPTION >
[CVT: RE0F10D]
SYSTEM
P0776
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
• Vehicle speed is not increased
When a malfunction occurs on the low oil pressure side
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
When a malfunction occurs on the high oil pressure side
P0778
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0779
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0841
Not changed from normal driving
—
P0847
Not changed from normal driving
—
P0848
Not changed from normal driving
—
P084C
Not changed from normal driving
—
P084D
Not changed from normal driving
—
P0863
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0890
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
• Vehicle speed is not increased
—
P0962
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0963
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0965
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
When a malfunction occurs on the low oil pressure side
• Selector shock is large
• Lock-up is not performed
When a malfunction occurs on the high oil pressure side
P0966
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0967
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P2765
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
DTC
Vehicle behavior
Conditions of vehicle
SYSTEM
TM-35
< SYSTEM DESCRIPTION >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
CVT CONTROL SYSTEM : Protection Control
INFOID:0000000011279273
The TCM becomes the protection control status temporarily to protect the safety when the safety of TCM and
transmission is lost. It automatically returns to the normal status if the safety is secured.
The TCM has the following protection control.
CONTROL FOR WHEEL SPIN
TORQUE IS REDUCED WHEN DRIVING WITH THE REVERSE GEAR
CONTROL WHEN FLUID TEMPERATURE IS HIGH
P2813
• Selector shock is large
• Start is slow
• Acceleration is slow
• Vehicle speed is not increased
When a malfunction occurs on the low oil pressure side
• Selector shock is large
When a malfunction occurs on the high oil pressure side
P2814
Selector shock is large
—
P2815
Selector shock is large
—
U0073
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
U0100
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
U0102
Not changed from normal driving
—
U0140
Not changed from normal driving
—
U0141
Not changed from normal driving
—
U0155
Not changed from normal driving
—
U0300
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
U1000
Not changed from normal driving
—
U110F
Not changed from normal driving
—
U1111
Not changed from normal driving
—
U1117
Not changed from normal driving
—
DTC
Vehicle behavior
Conditions of vehicle
Control
When a wheel spin is detected, the engine output and gear ratio are limited and the line pressure is increased.
Limits engine output when a wheel spin occurs in any of right and left drive wheels.
Vehicle behavior in
control
If the accelerator is kept depressing during wheel spin, the engine revolution and vehicle speed are limited to
a certain degree.
Normal return condi-
tion
Wheel spin convergence returns the control to the normal control.
Control
Engine output is controlled according to a vehicle speed while reversing the vehicle.
Vehicle behavior in
control
Power performance may be lowered while reversing the vehicle.
Normal return condi-
tion
Torque returns to normal by positioning the selector lever in a range other than “R” position.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст