Nissan Rogue. Manual — part 1075
B2193 CHAIN OF ECM-IMMU
SEC-79
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
B2193 CHAIN OF ECM-IMMU
DTC Logic
INFOID:0000000011278481
DTC DETECTION LOGIC
NOTE:
• If DTC B2193 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
• If DTC B2193 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Check DTC in “Self Diagnostic Result” of “BCM” using CONSULT.
Is DTC detected?
YES
>> GO TO
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000011278482
NOTE:
• If DTC B2193 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
• If DTC B2193 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
1.
CHECK BCM POWER SUPPLY AND GROUND CIRCUIT.
Check BCM power supply and ground circuit. Refer to
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the harness.
2.
CHECK ECM POWER SUPPLY AND GROUND CIRCUIT.
Check ECM power supply and ground circuit. Refer to
Is the inspection result normal?
YES
>> Replace ECM. Refer to
EC-502, "Removal and Installation"
. GO TO 3.
NO
>> Repair or replace the harness.
3.
PERFORM DTC CONFIRMATION PROCEDURE.
Perform the DTC confirmation procedure. Refer to
Does the DTC return?
YES
>> Replace BCM. Refer to
BCS-75, "Removal and Installation"
NO
>> Inspection End.
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
B2193
CHAIN OF BCM-ECM
Inactive communication between BCM
and ECM
• Harness or connectors
(The CAN communication line is open or
shorted.)
• ECM
• BCM
2015 Rogue NAM
SEC-80
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
B2196 DONGLE UNIT
B2196 DONGLE UNIT
Description
INFOID:0000000011278483
BCM performs ID verification between BCM and dongle unit.
When verification result is OK, BCM permits cranking.
DTC Logic
INFOID:0000000011278484
DTC DETECTION LOGIC
NOTE:
• If DTC B2196 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
.
• If DTC B2196 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
.
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Turn ignition switch OFF.
3. Turn ignition switch ON.
4. Check “Self Diagnostic Result” of “BCM” using CONSULT.
Is the DTC detected?
YES
>> Refer to
.
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000011278485
Regarding Wiring Diagram information, refer to
.
1.
PERFORM INITIALIZATION
1. Perform initialization of BCM and reregistration of all Intelligent Keys using CONSULT. Refer to the CON-
SULT Immobilizer mode and follow the on-screen instructions.
2. Start the engine.
Dose the engine start?
YES
>> Inspection End.
NO
>> GO TO 2.
2.
CHECK DONGLE UNIT CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect BCM connector and dongle unit connector.
3. Check continuity between BCM harness connector and dongle unit harness connector.
4. Check continuity between BCM harness connector and ground.
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
B2196
DONGLE NG
The ID verification results between BCM
and dongle unit is NG.
• Harness or connectors
(Dongle unit circuit is open or shorted.)
• Dongle unit
BCM
Dongle unit
Continuity
Connector
Terminal
Connector
Terminal
M18
16
M5
1
Yes
2015 Rogue NAM
B2196 DONGLE UNIT
SEC-81
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK DONGLE UNIT GROUND CIRCUIT
Check continuity between dongle unit harness connector and ground.
Is the inspection result normal?
YES
>> Replace dongle unit.
NO
>> Repair or replace harness.
BCM
Ground
Continuity
Connector
Terminal
M18
16
No
Dongle unit
Ground
Continuity
Connector
Terminal
M5
4
Yes
2015 Rogue NAM
SEC-82
< DTC/CIRCUIT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
B2198 NATS ANTENNA AMP.
B2198 NATS ANTENNA AMP.
DTC Logic
INFOID:0000000011278486
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE 1
1. Contact Intelligent Key back side to push-button ignition switch.
2. Check DTC in “Self Diagnostic Result” of “BCM” using CONSULT.
Is DTC detected?
YES
NO
>> GO TO 2.
2.
PERFORM DTC CONFIRMATION PROCEDURE 2
1. Press the push-button ignition switch.
2. Check DTC in “Self Diagnostic Result” of “BCM” using CONSULT.
Is DTC detected?
YES
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000011278487
Regarding Wiring Diagram information, refer to
.
1.
CONNECTOR INSPECTION
1. Disconnect BCM and NATS antenna amp.
2. Check connectors and terminals for deformation, disconnection, looseness or damage.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace as necessary.
2.
CHECK NATS ANTENNA AMP. CIRCUIT
1. Disconnect BCM connector and NATS antenna amp. connector.
2. Check continuity between BCM harness connector and NATS antenna amp. harness connector.
3. Check continuity between BCM harness connector and ground.
DTC No.
Trouble diagnosis
name
DTC detecting condition
Possible cause
B2198
NATS ANTENNA
AMP
Inactive communication between NATS antenna
amp. and BCM.
• Harness or connectors
(The NATS antenna amp. circuit is
open or shorted)
• NATS antenna amp.
• BCM
BCM
NATS antenna amp.
Continuity
Connector
Terminal
Connector
Terminal
M19
114
M25
3
Yes
115
1
2015 Rogue NAM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст