Nissan Rogue. Manual — part 805
INTERIOR ROOM LAMP POWER SUPPLY CIRCUIT
INL-47
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
YES
>> GO TO 3.
NO
>> Repair or replace harnesses.
3.
CHECK INTERIOR ROOM LAMP RELAY POWER SUPPLY CIRCUIT
1. Check voltage at room lamp relay harness connector.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace harnesses.
4.
CHECK INTERIOR ROOM LAMP RELAY POWER SUPPLY OUTPUT
1. Reconnect room lamp relay.
2. Check voltage at room lamp relay harness connector.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Replace room lamp relay.
5.
CHECK INTERIOR ROOM LAMP RELAY POWER SUPPLY OUTPUT
1. Disconnect he following connectors:
-
Room lamp relay M12
-
Map lamp assembly R6
-
Room lamp R15
-
Personal lamps 2nd row R16
-
Vanity mirror lamp LH R14
-
Vanity mirror lamp RH R10
-
Luggage room lamp B118
2. Check continuity between room lamp relay connector M12 and interior room lamp connector in question.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace harnesses.
6.
CHECK INTERIOR ROOM LAMP RELAY POWER SUPPLY OUTPUT SHORT CIRCUIT
Check continuity between room lamp relay and ground.
Room lamp relay
Voltage
(Approx.)
Connector
Terminal
M12
1
Battery voltage
3
Room lamp relay
Voltage
(Approx.)
Connector
Terminal
M12
5
Battery voltage
Room lamp relay
Each interior room lamp
Continuity
Connector
Terminal
Connector
Terminal
M12
5
Map lamp assembly
R6
1
Yes
Room lamp
R15
2
Personal lamps 2nd row
R16
2
Vanity mirror lamp LH
R14
1
Vanity mirror lamp RH
R10
1
Luggage room lamp
B118
1
Room lamp relay
–
Continuity
Connector
Terminal
M12
5
Ground
No
INL-48
< DTC/CIRCUIT DIAGNOSIS >
INTERIOR ROOM LAMP POWER SUPPLY CIRCUIT
Is the inspection result normal?
YES
>> Check that each interior lamp has no internal short circuit.
NO
>> Repair or replace harnesses.
INTERIOR ROOM LAMP CONTROL CIRCUIT
INL-49
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
INTERIOR ROOM LAMP CONTROL CIRCUIT
Description
INFOID:0000000011279213
Controls each interior room lamp (ground side) by PWM signal.
NOTE:
PWM signal control period is approximately 250 Hz (in the gradual brightening/dimming).
Component Function Check
INFOID:0000000011279214
CAUTION:
Before performing the diagnosis, check that the following is normal:
• Interior room lamp power supply
• Map lamp bulb
• Room lamp bulb
1.
CHECK INTERIOR ROOM LAMP CONTROL FUNCTION
CONSULT ACTIVE TEST
1. Switch the map lamp switch and room lamp switch to DOOR.
2. Turn ignition switch ON.
3. Select “INT LAMP” in “Active Test” of “BCM”.
4. With operating the test items, check that each interior room lamp turns ON/OFF (gradual brightening/dim-
ming).
Does the interior room lamp turns ON/OFF (gradual brightening/dimming)?
YES
>> Interior room lamp control circuit is normal.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000011279215
1.
CHECK INTERIOR ROOM LAMP CONTROL OUTPUT
CONSULT ACTIVE TEST
1. Turn ignition switch OFF.
2. Remove all the bulbs of map lamp and room lamp.
3. Turn ignition switch ON.
4. Select “INT LAMP” in “Active Test” of “BCM”.
5. With operating the test item, check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
Fixed ON>>GO TO 3.
Fixed OFF>>Replace BCM. Refer to
BCS-75, "Removal and Installation"
(with Intelligent Key system) or
BCS-135, "Removal and Installation"
(without Intelligent Key system).
2.
CHECK INTERIOR ROOM LAMP CONTROL OPEN CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect BCM connector, map lamp assembly and room lamp connector.
3. Check continuity between BCM harness connector and map lamp assembly harness connector.
On
: Interior room lamp gradual brightening
Off
: Interior room lamp gradual dimming
BCM
Ground
Test item
Continuity
Connector
Terminal
M20
162
INT LAMP
On
Yes
Off
No
INL-50
< DTC/CIRCUIT DIAGNOSIS >
INTERIOR ROOM LAMP CONTROL CIRCUIT
4. Check continuity between BCM harness connector and room lamp harness connector.
Is the inspection result normal?
YES
>> Replace map lamp assembly or room lamp.
NO
>> Repair or replace harnesses.
3.
CHECK INTERIOR ROOM LAMP CONTROL SHORT CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect BCM connector, map lamp assembly connector and room lamp connector.
3. Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES
>> Replace BCM. Refer to
BCS-75, "Removal and Installation"
(with Intelligent Key system) or
135, "Removal and Installation"
(without Intelligent Key system).
NO
>> Repair or replace harnesses.
BCM
Map lamp assembly
Continuity
Connector
Terminal
Connector
Terminal
M20
162
R6
3
Yes
BCM
Room lamp
Continuity
Connector
Terminal
Connector
Terminal
M20
162
R15
1
Yes
BCM
Ground
Continuity
Connector
Terminal
M20
162
No
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст