Nissan Rogue. Manual — part 877
LAN
4WD BRANCH LINE CIRCUIT
LAN-207
< DTC/CIRCUIT DIAGNOSIS >
[CAN SYSTEM (TYPE 6)]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
4WD BRANCH LINE CIRCUIT
Diagnosis Procedure
INFOID:0000000011506792
1.
CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the terminals and connectors of the AWD control unit for damage, bend and loose connection (unit
side and connector side).
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair the terminal and connector.
2.
CHECK HARNESS FOR OPEN CIRCUIT
1. Disconnect the connector of AWD control unit.
2. Check the resistance between the AWD control unit harness connector terminals.
Is the measurement value within the specification?
YES
>> GO TO 3.
NO
>> Repair the AWD control unit branch line.
3.
CHECK POWER SUPPLY AND GROUND CIRCUIT
Check the power supply and the ground circuit of the AWD control unit. Refer to
.
Is the inspection result normal?
YES (Present error)>>Replace the AWD control unit. Refer to
DLN-68, "Removal and Installation"
YES (Past error)>>Error was detected in the AWD control unit branch line.
NG
>> Repair the power supply and the ground circuit.
AWD control unit harness connector
Resistance (
Ω)
Connector No.
Terminal No.
B75
8
16
Approx. 54 – 66
LAN-208
< DTC/CIRCUIT DIAGNOSIS >
[CAN SYSTEM (TYPE 6)]
PWBD BRANCH LINE CIRCUIT
PWBD BRANCH LINE CIRCUIT
Diagnosis Procedure
INFOID:0000000011506793
1.
CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the terminals and connectors of the automatic back door control module for damage, bend and
loose connection (unit side and connector side).
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair the terminal and connector.
2.
CHECK HARNESS FOR OPEN CIRCUIT
1. Disconnect the connector of automatic back door control module.
2. Check the resistance between the automatic back door control module harness connector terminals.
Is the measurement value within the specification?
YES
>> GO TO 3.
NO
>> Repair the automatic back door control module branch line.
3.
CHECK POWER SUPPLY AND GROUND CIRCUIT
Check the power supply and the ground circuit of the automatic back door control module. Refer to
"AUTOMATIC BACK DOOR CONTROL UNIT : Diagnosis Procedure"
Is the inspection result normal?
YES (Present error)>>Replace the automatic back door control module. Refer to
YES (Past error)>>Error was detected in the automatic back door control module branch line.
NG
>> Repair the power supply and the ground circuit.
Automatic back door control module harness connector
Resistance (
Ω)
Connector No.
Terminal No.
B55
24
12
Approx. 54 – 66
LAN
BCM BRANCH LINE CIRCUIT
LAN-209
< DTC/CIRCUIT DIAGNOSIS >
[CAN SYSTEM (TYPE 6)]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
BCM BRANCH LINE CIRCUIT
Diagnosis Procedure
INFOID:0000000011506794
1.
CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the terminals and connectors of the BCM for damage, bend and loose connection (unit side and
connector side).
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair the terminal and connector.
2.
CHECK HARNESS FOR OPEN CIRCUIT
1. Disconnect the connector of BCM.
2. Check the resistance between the BCM harness connector terminals.
Is the measurement value within the specification?
YES
>> GO TO 3.
NO
>> Repair the BCM branch line.
3.
CHECK POWER SUPPLY AND GROUND CIRCUIT
Check the power supply and the ground circuit of the BCM. Refer to the following.
• With intelligent key system:
.
• Without intelligent key system:
BCS-128, "Diagnosis Procedure"
Is the inspection result normal?
YES (Present error)>>Replace the BCM. Refer to the following.
• With intelligent key system:
BCS-75, "Removal and Installation"
.
• Without intelligent key system:
BCS-135, "Removal and Installation"
YES (Past error)>>Error was detected in the BCM branch line.
NO
>> Repair the power supply and the ground circuit.
BCM harness connector
Resistance (
Ω)
Connector No.
Terminal No.
B16
60
80
Approx. 108 – 132
LAN-210
< DTC/CIRCUIT DIAGNOSIS >
[CAN SYSTEM (TYPE 6)]
HVAC BRANCH LINE CIRCUIT
HVAC BRANCH LINE CIRCUIT
Diagnosis Procedure
INFOID:0000000011506797
1.
CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the following terminals and connectors for damage, bend and loose connection (unit side and con-
nector side).
-
A/C auto amp. (With auto A/C)
-
Harness connector M127 (With auto A/C)
-
Harness connector M125 (With auto A/C)
-
Front air control (Without auto A/C)
-
BCM
Is the inspection result normal?
YES
>> GO TO 2. (With auto A/C)
YES
>> GO TO 3. (Without auto A/C)
NO
>> Repair the terminal and connector.
2.
CHECK HARNESS CONTINUITY (OPEN CIRCUIT)
1. Disconnect the connector of BCM.
2. Check the continuity between the BCM harness connector terminals.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Check the harness and repair the root cause (CAN communication circuit 2 side). Refer to
.
3.
CHECK HARNESS FOR OPEN CIRCUIT
1. Connect the connector of BCM (With auto A/C).
2. Disconnect the connector of A/C auto amp. (With auto A/C) or front air control (Without auto A/C).
3. Check the resistance between the A/C auto amp. (With auto A/C) or front air control (Without auto A/C)
harness connector terminals.
-
With auto A/C
-
Without auto A/C
Is the measurement value within the specification?
YES
>> GO TO 4.
NO
>> Repair the A/C auto amp. (With auto A/C) or front air control (Without auto A/C) branch line.
4.
CHECK POWER SUPPLY AND GROUND CIRCUIT
Check the power supply and the ground circuit of the A/C auto amp. (With auto A/C) or front air control (With-
out auto A/C). Refer to the following.
• Automatic air conditioning:
BCM harness connector
Continuity
Connector No.
Terminal No.
M18
6
8
Existed
5
9
Existed
A/C auto amp. harness connector
Resistance (
Ω)
Connector No.
Terminal No.
M54
11
31
Approx. 54 – 66
Front air control harness connector
Resistance (
Ω)
Connector No.
Terminal No.
M50
7
23
Approx. 54 – 66
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст