Nissan Qashqai J11. Manual — part 1530
SUNSHADE UNIT ASSEMBLY
RF-31
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
RF
N
O
P
SUNSHADE UNIT ASSEMBLY
Exploded View
INFOID:0000000010438449
Removal and Installation
INFOID:0000000010286671
REMOVAL
CAUTION:
1.
Sunshade assembry
2.
Sunshade unit assembly
3.
Rear sunshade bracket RH
4.
Welt
5.
Rear sunshade bracket LH
6.
Sunshade motoer
JMKIB3238ZZ
RF-32
< REMOVAL AND INSTALLATION >
SUNSHADE UNIT ASSEMBLY
• Always work with a helper.
• Fully open the sunshade before removal.
• Never operate sunshade motor assembly after removal.
• When taking sunshade unit assembly out, use cloths to protect the seats and trim from damage.
1.
Fully open the sunshade.
2.
Remove the headlining. Refer to
INT-25, "Removal and Installation"
.
3.
Remove the sunshade motor assembly. Refer to
RF-30, "Removal and Installation"
.
4.
Remove the harness clamp.
5.
Remove the TORX bolt.
6.
Remove the rear sunshade bracket.
7.
Remove the mounting bolt from the side rail.
8.
Remove the unit side bolts of the sunshade front bracket and loosen the body side bolts.
9.
Remove the bolt from the rear end, and then remove sunshade unit assembly.
10. Remove the sunshade from vehicle.
INSTALLATION
1.
Temporarily tighten the mounting bolts to the sunshade front bracket.
2.
Place the front end of the rail onto the sunshade front bracket.
3.
Temporarily tighten the mounting bolts to the rear end of sunshade unit assembly.
4.
Temporarily tighten the mounting bolts to the rear sunshade bracket.
5.
Tighten the installation points diagonally excluding the installation point of the sunshade bracket around
the roof.
6.
Tighten the sunshade front and rear bracket bolts, of the vehicle side, and then tighten the bolt of the rail
side.
7.
Tighten the mounting bolt to the rear end.
8.
Install the sunshade motor assembly. Refer to
RF-30, "Removal and Installation"
9.
Install the headlining. Refer to
INT-25, "Removal and Installation"
Disassembly and Assembly
INFOID:0000000010286672
DISASSEMBLY
1.
Remove sunshade motor assembly. Refer to
RF-30, "Removal and Installation"
2.
Remove sunshade assembly. Refer to
RF-33, "Removal and Installation"
ASSEMBLY
Assemble in the reverse order of disassembly.
NOTE:
After installation sunshade motor, perform additional service. Refer to
.
SUNSHADE
RF-33
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
RF
N
O
P
SUNSHADE
Exploded View
INFOID:0000000010438750
Removal and Installation
INFOID:0000000010286674
REMOVAL
1.
Remove sunshade unit assembly. Refer to
RF-31, "Removal and Installation"
.
1.
Sunshade assembry
2.
Sunshade unit assembly
3.
Rear sunshade bracket RH
4.
Welt
5.
Rear sunshade bracket LH
6.
Sunshade motoer
JMKIB3238ZZ
RF-34
< REMOVAL AND INSTALLATION >
SUNSHADE
2.
Remove sunshade guide bracket fixing screw
and then
remove sunshade guide bracket
from sunshede unit
3.
Disengage sunshade fixing pawls, and then remove sunshade
from sunshade unit assembly.
INSTALLATION
Install in the reverse order of removal.
: Vehicle front
JMKIB3267ZZ
: Vehicle front
JMKIB3268ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст