Nissan Qashqai J11. Manual — part 714
COMPONENT PARTS
TM-431
< SYSTEM DESCRIPTION >
[CVT: RE0F10G]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
CVT shift selector assembly
Center console, under
Engine room
Engine room, LH
Transaxle assembly
No.
Component
Function
Combination meter
Mainly transmits the following signal to TCM via CAN communication.
• Manual mode downshift signal
• Manual mode upshift signal
• Manual mode signal
• Non-manual mode signal
• ECO mode switch signal
*3
Mainly receives the following signals from TCM via CAN communication.
• Shift position signal
• Manual mode shift refusal signal
Refer to
MWI-6, "Component Parts Location"
for detailed installation loca-
tion.
Shift position indicator
(On the combination meter)
TM-438, "CVT CONTROL SYSTEM : Shift Position Indicator"
Stop/start indicator lamp
(On the combination meter)
EC9-24, "Stop/Start Indicator Lamp"
Malfunction indicator lamp (MIL)
(On the combination meter)
EC9-23, "Malfunction Indicator Lamp"
ECO mode switch
*3
BCM
Mainly transmits the following signal to TCM via CAN communication.
• Stop lamp switch signal
Refer to
BCS-7, "BODY CONTROL SYSTEM : Component Parts Location"
for detailed installation location.
ECM
Mainly transmits the following signal to TCM via CAN communication.
• Engine and CVT integrated control signal
NOTE:
General term for the communication (torque-down permission, torque-
down request, etc.) exchanged between the ECM and TCM.
• Engine speed signal
• Engine coolant temperature signal
• Accelerator pedal position signal
• Closed throttle position signal
• Idle signal
• Stop/start readiness signal
*1
Mainly receives the following signals from TCM via CAN communication.
• Malfunctioning indicator lamp signal
• Stop/start enable OK signal
*1
• ECO mode signal
*3
EC9-12, "Component Parts Location"
for detailed installation loca-
tion.
ABS actuator and electric unit (control unit)
Mainly transmits the following signal to TCM via CAN communication.
• ABS operation signal
• TCS operation signal
• VDC operation signal
• ABS malfunction signal
• Vehicle speed signal
• Decel G signal
Refer to
BRC-8, "Component Parts Location"
for detailed installation loca-
tion.
Manual mode switch
TM-438, "CVT CONTROL SYSTEM : Manual Mode Switch"
G sensor
TM-437, "CVT CONTROL SYSTEM : G SENSOR"
TCM
TM-432, "CVT CONTROL SYSTEM : TCM"
Electric oil pump relay
TM-432
< SYSTEM DESCRIPTION >
[CVT: RE0F10G]
COMPONENT PARTS
*1: With stop/start system
*2: These components are included in control valve assembly.
*3: For Europe (LHD), Russia, Ukraine, Kazakhstan, and Australia.
CVT CONTROL SYSTEM : TCM
INFOID:0000000010245519
• The TCM consists of a microcomputer and connectors for signal
input and output and for power supply.
• The vehicle driving status is judged based on the signals from the
sensors, switches, and other control units, and the optimal tran-
saxle control is performed.
• For TCM control items, refer to
.
CVT CONTROL SYSTEM : Transmission Range Switch
INFOID:0000000010245520
• The transmission range switch is installed to upper part of tran-
saxle case.
• The transmission range switch detects the selector lever position.
Transmission range switch
TM-432, "CVT CONTROL SYSTEM : Transmission Range Switch"
Input speed sensor
TM-434, "CVT CONTROL SYSTEM : Input Speed Sensor"
Electric oil pump
TM-438, "CVT CONTROL SYSTEM : Electric Oil Pump"
Primary speed sensor
TM-433, "CVT CONTROL SYSTEM : Primary Speed Sensor"
CVT unit connector
—
Output speed sensor
TM-433, "CVT CONTROL SYSTEM : Output Speed Sensor"
Control
valve
CVT fluid temperature sensor
*2
TM-434, "CVT CONTROL SYSTEM : CVT Fluid Temperature Sensor"
Primary pressure sensor
*2
TM-435, "CVT CONTROL SYSTEM : Primary Pressure Sensor"
Secondary pressure sensor
*2
TM-435, "CVT CONTROL SYSTEM : Secondary Pressure Sensor"
Line pressure solenoid valve
*2
TM-437, "CVT CONTROL SYSTEM : Line Pressure Solenoid Valve"
Primary pressure solenoid valve
*2
TM-436, "CVT CONTROL SYSTEM : Primary Pressure Solenoid Valve"
Secondary pressure solenoid valve
*2
TM-436, "CVT CONTROL SYSTEM : Secondary Pressure Solenoid Valve"
Torque converter clutch solenoid
valve
*2
TM-437, "CVT CONTROL SYSTEM : Torque Converter Clutch Solenoid
Select solenoid valve
*2
TM-436, "CVT CONTROL SYSTEM : Select Solenoid Valve"
No.
Component
Function
JSDIA4183ZZ
JSDIA4184ZZ
COMPONENT PARTS
TM-433
< SYSTEM DESCRIPTION >
[CVT: RE0F10G]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
CVT CONTROL SYSTEM : Primary Speed Sensor
INFOID:0000000010245521
• The primary speed sensor is installed to side cover of transaxle.
• The primary speed sensor detects primary pulley speed.
• The primary speed sensor generates an ON-OFF pulse signal according to the rotating body speed. TCM
judges the rotating body speed from the pulse signal.
CVT CONTROL SYSTEM : Output Speed Sensor
INFOID:0000000010245522
• The output speed sensor is installed to back side of transaxle.
• The output speed sensor detects final gear speed.
JSDIA3073ZZ
JSDIA1824GB
JSDIA3073ZZ
TM-434
< SYSTEM DESCRIPTION >
[CVT: RE0F10G]
COMPONENT PARTS
• The output speed sensor generates an ON-OFF pulse signal according to the rotating body speed. TCM
judges the rotating body speed from the pulse signal.
CVT CONTROL SYSTEM : Input Speed Sensor
INFOID:0000000010245523
• The input speed sensor is installed to the front side of transaxle
case.
• The input speed sensor detects input shaft speed.
• The input speed sensor generates an ON-OFF pulse signal according to the rotating body speed. TCM
judges the rotating body speed from the pulse signal.
CVT CONTROL SYSTEM : CVT Fluid Temperature Sensor
INFOID:0000000010245524
• The CVT fluid temperature sensor is installed to control valve.
• The CVT fluid temperature sensor detects CVT fluid temperature in oil pan.
JSDIA1824GB
JSDIA3074ZZ
JSDIA1824GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст