Nissan Qashqai J11. Manual — part 235
ECH-238
< DTC/CIRCUIT DIAGNOSIS >
[HRA2DDT]
P060B ECM
P060B ECM
DTC Logic
INFOID:0000000010379129
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
PRECONDITIONING
Turn ignition switch OFF and wait at least 12 minutes.
>> GO TO 2.
2.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Turn ignition switch ON and wait at least 1 second.
2.
Check DTC.
Is DTC detected?
YES
>> Proceed to
ECH-238, "Diagnosis Procedure"
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000010379130
1.
REPLACE ECM
1.
Replace ECM. Refer to
ECH-313, "Removal and Installation"
2.
Proceed to
>> INSPECTION END
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
Possible cause
P060B
INTERNAL CONTROL MODULE
(Internal control module A/D pro-
cessing performance)
ECM calculation function is malfunctioning
for 0.4 seconds or more.
ECM
P061A ECM
ECH-239
< DTC/CIRCUIT DIAGNOSIS >
[HRA2DDT]
C
D
E
F
G
H
I
J
K
L
M
A
ECH
N
P
O
P061A ECM
DTC Logic
INFOID:0000000010379131
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
INSPECTION START
NOTE:
DTC P061A can not duplicate.
>> Proceed to
ECH-239, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000010379132
1.
REPLACE ECM
1.
Replace ECM. Refer to
ECH-313, "Removal and Installation"
2.
>> INSPECTION END
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
Possible cause
P061A
INTERNAL CONTROL MOD-
ULE
(Internal control module
torque performance)
• ECM detects failure of torque structure for 1
second or more.
• When while ECM computes torque, ECM
detects failure for 1 second or more.
• Throttle low/high is not executed correctly
for 1 second.
ECM
ECH-240
< DTC/CIRCUIT DIAGNOSIS >
[HRA2DDT]
P062D ECM
P062D ECM
DTC Logic
INFOID:0000000010500537
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
PRECONDITIONING
Turn ignition switch OFF and wait at least 12 minutes.
>> GO TO 2.
2.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Turn ignition switch ON and wait at least 10 second.
2.
Check DTC.
Is DTC detected?
YES
>> Proceed to
ECH-240, "Diagnosis Procedure"
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000010500538
1.
REPLACE ECM
1.
Replace ECM. Refer to
2.
Proceed to
>> INSPECTION END
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
Possible cause
P062D
FUEL INJECTOR DRIVER
B1
(Fuel injector driver circuit
performance bank 1)
ECM calculation function is malfunctioning.
ECM
P062E ECM
ECH-241
< DTC/CIRCUIT DIAGNOSIS >
[HRA2DDT]
C
D
E
F
G
H
I
J
K
L
M
A
ECH
N
P
O
P062E ECM
DTC Logic
INFOID:0000000010500535
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
PRECONDITIONING
Turn ignition switch OFF and wait at least 12 minutes.
>> GO TO 2.
2.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Turn ignition switch ON and wait at least 10 second.
2.
Check DTC.
Is DTC detected?
YES
>> Proceed to
ECH-241, "Diagnosis Procedure"
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000010500536
1.
REPLACE ECM
1.
Replace ECM. Refer to
2.
>> INSPECTION END
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
Possible cause
P062E
FUEL INJECTOR DRIVER
B2
(Fuel injector driver circuit
performance bank 2)
ECM calculation function is malfunctioning.
ECM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст