Nissan Qashqai J11. Manual — part 1761
SYSTEM
INL-9
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
Without Sunshade System
OUTLINE
• Following lamps are controlled by interior room lamp timer control function of BCM.
- Map lamp*
- Room lamp*
- Personal lamp*
• Luggage room lamp is controlled by luggage room lamp control function of BCM.
• Push-button ignition switch illumination is controlled by push-button ignition switch illumination control func-
tion of BCM.
*: Interior room lamp time control operates when the switch position is DOOR.
INTERIOR ROOM LAMP TIMER CONTROL
Interior Room Lamp Timer Basic Operation
• Following lamps turn ON and OFF (gradual brightening and dimming) by the interior room lamp timer.
- Map lamp
JMLIA5375GB
JPLIA0093GB
INL-10
< SYSTEM DESCRIPTION >
SYSTEM
- Room lamp
- Personal lamp
• For Europe, Russia or South Africa: Timer operating time is 30 seconds.
• Except for Europe, Russia of South Africa: Timer operating time is 15 seconds.
• Brightening time is 1 second and dimming time is 1 seconds.
• BCM judges the vehicle condition with the following items and activates the interior room lamp timer.
- Ignition switch status
- Key switch signal
- Door switch signal
- Door lock/unlock signal (remote keyless entry receiver, door lock and unlock switch, each door request
switch)
NOTE:
Factory setting of interior room lamp is with interior room lamp timer control. This setting can be set to without
by using CONSULT. Refer to
INL-15, "INT LAMP : CONSULT Function (BCM - INT LAMP)"
.
Interior Room Lamp ON Operation
• BCM always turns interior room lamp relay ON to turn on interior room lamp when any door opens.
• BCM activates the interior room lamp timer in any of the following condition to turn the interior room lamp ON
for a period of time.
- Status of all doors are OPEN
→
CLOSE
- Ignition switch is turned ON
→
OFF
- Key switch is ON
→
OFF
- Door unlock signal is detected when all doors close with ignition switch OFF
NOTE:
The timer restarts if new condition is input during the timer operating time.
Interior Room Lamp OFF Operation
BCM stops the timer in any of the following condition to turn the interior room lamp OFF.
• The timer operating time is expired
• Ignition switch is turned OFF
→
ON
• Door lock signal is detected with all doors close.
LUGGAGE ROOM LAMP CONTROL
BCM turns luggage room lamp ON when the following condition is detected.
• Back door switch is ON
BCM turns luggage room lamp OFF when the following condition is detected.
• Back door switch is OFF
PUSH-BUTTON IGNITION SWITCH ILLUMINATION CONTROL
Push-button Ignition Switch Illumination ON Operation
BCM turns the push-button ignition switch illumination ON when Ignition switch is ON.
Push-button Ignition Switch Illumination OFF Operation
BCM turns the push-button ignition switch illumination OFF when the following condition is satisfied.
• Status does not change for 16 seconds
• Driver side door is UNLOCK
→
LOCK
INTERIOR ROOM LAMP BATTERY SAVER SYSTEM
INTERIOR ROOM LAMP BATTERY SAVER SYSTEM : System Description
INFOID:0000000010335132
SYSTEM DIAGRAM
SYSTEM
INL-11
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
With Sunshade System
Without Sunshade System
JMLIA5148GB
JMLIA5149GB
INL-12
< SYSTEM DESCRIPTION >
SYSTEM
OUTLINE
• Interior room lamp battery saver is controlled by BCM.
• BCM turns applicable lamps OFF depending on the vehicle condition. This function prevent battery dis-
charge if the driver neglects, turning OFF any lamps.
Applicable lamps
- Map lamp
- Room lamp
- Personal lamp
- Luggage room lamp
- Vanity mirror lamp
INTERIOR ROOM LAMP BATTERY SAVER FUNCTION
• BCM turns interior room lamp relay ON and keeps the interior room lamp power supply continuously when
the ignition switch position is ON.
• When the ignition switch is turned OFF, BCM operates timer for 15 minutes and then turns interior room
lamp relay OFF to cut the interior room lamp power supply.
NOTE:
When the ignition switch is turned OFF and all door is locked, BCM operates timer for 10 seconds and then
turns interior room lamp relay OFF to cut the interior room lamp power supply.
• BCM restart the timer when any of the following signal changes while operating the timer.
- Ignition switch status
- Key switch signal
- Door switch signal
- Back door switch signal
- Door lock/unlock signal (remote keyless entry receiver, door lock and unlock switch, each door request
switch)
ILLUMINATION CONTROL SYSTEM
ILLUMINATION CONTROL SYSTEM : System Description
INFOID:0000000010430903
SYSTEM DIAGRAM
OUTLINE
Each illumination lamp is controlled by each function of BCM, IPDM E/R and combination meter.
Control by BCM
• Parking, license plate and tail lamp control function
• Combination switch reading function
• Auto light function
Control by IPDM E/R
• Relay control function
JMLIA5150GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст