Nissan Qashqai J11. Manual — part 1641
BRM-392
< PREPARATION >
[EXCEPT FOR EUROPE AND RUSSIA (RHD)]
BODY COMPONENT PARTS
BODY COMPONENT PARTS
Ultra High Strength Steel Part
INFOID:0000000010505350
DESCRIPTION
Ultra high strength steel parts signify high strength steel plates with tensile strength of 980 MPa or more.
When replacing parts made of ultra high strength steel or parts including ultra high strength steel, never per-
form the prohibition described below:
PROHIBITION
WARNING:
Never cut ultra high strength steel parts or perform butt welding. Violation of this prohibition causes
extreme strength degradation, and the strength before damage cannot be secured.
PART REPLACEMENT
To replace an ultra high strength part, be sure to replace it by panel supply unit of ultra high strength steel part.
For the welding method, refer to
BRM-410, "Welding of Ultra High Strength Steel"
Underbody Component Parts
INFOID:0000000010499752
Refer to parts catalogue for the replacement parts.
BODY COMPONENT PARTS
BRM-393
< PREPARATION >
[EXCEPT FOR EUROPE AND RUSSIA (RHD)]
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
R9M engine models
: Both sided anti-corrosive precoated steel sections
: High strength steel (HSS) sections
: Both sided anti-corrosive steel and HSS sections
JSKIA3939ZZ
BRM-394
< PREPARATION >
[EXCEPT FOR EUROPE AND RUSSIA (RHD)]
BODY COMPONENT PARTS
No.
Parts name
Tensile strength
(MPa)
Both sided
anti-corrosive
precoated
steel sections
Spare wheel clamp bracket assembly
Under 440
—
Rear floor rear
Under 440
×
Rear floor side assembly (RH & LH)
Under 440
×
Rear floor front
Under 440
×
Inner rear belt anchor reinforcement assembly (RH & LH)
Under 440
×
Rear seat crossmember
Under 440
×
Center front floor assembly
780
×
Front floor assembly (RH & LH)
b.
LH
1350MPa
caution
T=1.4 mm (0.055 in)
590
×
RH
980MPa
caution
T=1.8 mm (0.071 in)
Inner sill assembly (RH & LH)
980MPa
caution
T=1.4 mm (0.055 in)
—
×
Cowl top
Under 440
×
Upper dash assembly
Under 440
×
Lower dash assembly
780
×
Steering hole cover assembly
Under 440
×
Side dash assembly (RH & LH)
590
×
Lower center dash crossmember assembly
980MPa
caution
T=2.0 mm (0.079 in)
—
×
Front strut housing assembly (RH & LH)
445
×
Upper side cowl top (RH & LH)
Under 440
×
Lower front hoodledge (RH & LH)
Under 440
×
Upper hoodledge assembly (RH & LH)
Under 440
×
Hoodledge reinforcement assembly (RH & LH)
Under 440
×
Side radiator core support assembly (RH & LH)
Under 440
×
Front bumper reinforcement assembly
1180MPa
caution
T=1.2 mm (0.079 in)
440
—
Lower front bumper stay (RH & LH)
600
—
Hoodledge connector assembly (RH & LH)
Under 440
×
Side member closing plate assembly (RH & LH)
c.
980MPa
caution
T=2.0 mm (0.079 in)
590
×
Front side member assembly (RH & LH)
d.
980MPa
caution
T=2.0 mm (0.079 in)
750
×
Engine mounting member bracket assembly
445
×
Front suspension mounting rear bracket assembly (RH & LH)
590
×
Rear floor front extension assembly
Under 440
×
Center rear crossmember assembly
Under 440
×
BODY COMPONENT PARTS
BRM-395
< PREPARATION >
[EXCEPT FOR EUROPE AND RUSSIA (RHD)]
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
CAUTION:
If the high strength steel (ultra high strength steel) of this is broken, replace by assembly for the supply part.
NOTE:
• For the parts without a number described in the figure, it is supplied only with the assembly part that the part is included with.
• Tensile strength column shows the largest strength value of a part in the component part.
Body Component Parts
INFOID:0000000010499753
Refer to parts catalogue for the replacement parts.
Rear side member assembly (RH & LH)
590
×
Rear side member extension assembly (RH & LH)
780
×
No.
Parts name
Tensile strength
(MPa)
Both sided
anti-corrosive
precoated
steel sections
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст