Nissan Qashqai J11. Manual — part 1170
DOOR FINISHER
INT-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
REAR DOOR FINISHER : Exploded View
INFOID:0000000010350937
REAR DOOR FINISHER : Removal and Installation
INFOID:0000000010350938
REMOVAL
1.
Fully open door window.
2.
Insert remover tool (A) to disengage the escutcheon retaining
pawls to door finisher.
3.
Remove inside handle finisher.
E1JIA0256ZZ
1.
Power window switch rear (LH)
2.
Inside handle finisher (rear LH)
3.
Rear door finisher (LH)
4.
Cover rear door inner (LH)
5.
Rear door panel
: Clip
: Pawl
: Metal clip
: Pawl
E1JIA0263ZZ
INT-16
< REMOVAL AND INSTALLATION >
DOOR FINISHER
4.
Insert remover tool (A) to disengage power window switch.
5.
Disconnect harness connectors (A) for power window switch.
6.
Remove power window switch.
7.
Remove bolt (A).
8.
Insert remover tool (A) between door finisher and door panel to
disengage door finisher mounting clips, starting from the bottom
and working to the top.
9.
Remove rear door finisher.
10. Remove the following parts after removing door finisher.
• Power window switch rear. Refer to
INT-15, "REAR DOOR FINISHER : Removal and Installation"
• Seal assembly rear door inside.
• Cover rear door inner.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
E1JIA0264ZZ
E1JIA0265ZZ
E1JIA0266ZZ
JMJIA0256ZZ
DOOR FINISHER
INT-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
When installing door finisher, check that clips are securely fitted in panel holes on body, and then
press them in.
INT-18
< REMOVAL AND INSTALLATION >
BODY SIDE TRIM
BODY SIDE TRIM
Exploded View
INFOID:0000000010350939
Removal and Installation
INFOID:0000000010350940
CAUTION:
• Wrap the tip of flat-bladed screwdriver with a cloth when removing metal clips from garnishes.
• Be careful not to damage the body while removing side trim.
REMOVAL
FRONT PILLAR GARNISH
1.
Release front pillar garnish portion from front body side welt.
2.
Disengage front pillar garnish fixing anchor clips using remover tool (A).
CAUTION:
1.
Front pillar garnish
2.
Dash side finisher
3.
Welt body side front (RH)
4.
Front kicking plate inner
5.
Rear kicking plate inner
6.
Center pillar lower garnish
7.
Luggage side lower finisher (front)
8.
Welt body side rear (RH)
9.
Center pillar upper garnish
10. Rear pillar finisher (RH)
11. Rear seat belt escutcheon
12. Trim clip
: Clip
: Pawl
: Metal clip
E1JIA0272ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст