Nissan Qashqai J11. Manual — part 1280
POWER DOOR LOCK SYSTEM
DLK-389
< SYSTEM DESCRIPTION >
[TYPE 3]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
POWER DOOR LOCK SYSTEM
System Diagram
INFOID:0000000010434958
System Description
INFOID:0000000010434959
DOOR LOCK FUNCTION
Door Lock and Unlock Switch
• The door lock and unlock switch (driver side) is built into power window main switch.
• The door lock and unlock switch (passenger side) is built into front power window switch (passenger side).
• Interlocked with the locking operation of door lock and unlock switch, door lock actuators of all doors are
locked.
• Interlocked with the unlocking operation of door lock and unlock switch, door lock actuators of all doors actu-
ator are unlocked.
Unlock Sensor
• BCM locks all doors or unlocks all doors, when driver door lock knob is operated.
• With the mechanical key inserted in the door key cylinder on driver side, turning it to lock position, locks door
lock actuator of all doors.
• With the mechanical key inserted in the door key cylinder on driver side, turning it to unlock position, unlocks
door lock actuator of all doors.
Operation Condition
If all of the following conditions are satisfied, door lock and unlock operation is performed using the door lock
and unlock switch.
*
1
: While door lock and unlock switch is pressed in the lock direction during this state, combination meter buzzer sounds and warns.
*
2
: When this item becomes OK according to keyfob ID verification, door lock/unlock operation is allowed.
KEY REMINDER FUNCTION
• While ignition key is inserted in ignition key cylinder and driver door is open, door is not locked when door
lock and unlock switch is pressed in the lock direction. This prevents keyfob from being left in the vehicle.
• While door lock and unlock switch is pressed in the lock direction, combination meter buzzer sounds and
warns.
DOOR LOCK STATUS INDICATOR OPERATION
JMKIB2483GB
Door lock and unlock switch operation
Operation condition
LOCK
• Ignition Key is removed from ignition key cylinder and closed driver
side door*
1
• Doors other than drivers door are closed*
1
• Door are not locked by keyfob*
2
• Door lock that is requested is not auto door lock*
2
UNLOCK
Door are not locked by keyfob*
2
DLK-390
< SYSTEM DESCRIPTION >
[TYPE 3]
POWER DOOR LOCK SYSTEM
The door lock status indicator indicates door lock status under the following condition.
UNLOCK LINK FUNCTION
When driver door or passenger door is opened using the override function, all doors are unlocked.
Unlock function operates when driver door or passenger door is open while all of the following conditions are
satisfied.
NOTE:
When anti-hijack function is activated, only the applicable door is unlocked.
Indicator operation
Ignition position
Door status
Lock operation
ON (30 minutes timer)
OFF
All doors are closed and door
is locked
Door lock and unlock switch
ON
ON
All doors are closed and door
is locked
Door lock and unlock switch
ON (1 minute timer)
OFF
All doors are closed and door
is locked
Keyfob or auto door lock func-
tion
ON
ON
All doors are closed and door
is locked
Keyfob or auto door lock func-
tion
ON
→
OFF
–
(All doors are closed
→
any
door is open) or (All doors are
locked
→
any door is un-
locked)
–
ON (timer is running)
→
ON
(timer is stop)
OFF
→
ON
–
–
ON
→
ON (30 minutes timer)
ON
→
OFF
–
Door lock and unlock switch
ON
→
ON (1 minute timer)
ON
→
OFF
–
Keyfob or auto door lock func-
tion
Operation condition
• Doors are locked by door lock/unlock switch or by automatic lock/unlock function
• Driver or passenger door switch is switched from OFF to ON
• Anti-hijack function is not activated
• Vehicle speed is 5 km/h (3 MPH) or less
REMOTE KEYLESS ENTRY SYSTEM
DLK-391
< SYSTEM DESCRIPTION >
[TYPE 3]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
REMOTE KEYLESS ENTRY SYSTEM
REMOTE KEYLESS ENTRY FUNCTION
REMOTE KEYLESS ENTRY FUNCTION : System Diagram
INFOID:0000000010434960
REMOTE KEYLESS ENTRY FUNCTION : System Description
INFOID:0000000010434961
DOOR LOCK AND UNLOCK OPERATION
• When door lock and unlock button of keyfob is pressed, door lock and unlock signal transmits from keyfob to
BCM via remote keyless entry receiver.
• When BCM receives the door lock and unlock signal, it operates door lock actuator, blinks the hazard lamp
at the same time as a reminder.
OPERATION CONDITION
If the following conditions are satisfied, door lock/unlock operation is performed if the keyfob is operated.
OPERATION AREA
To ensure that the keyfob works effectively, use within 100 cm (3 ft) range of each door, however the operable
range may differ according to surroundings.
ANTI-HIJACK FUNCTION
Information of super lock function with anti-hijack function.
Refer to
DLK-392, "SUPER LOCK FUNCTION : System Description"
.
HAZARD REMINDER FUNCTION
Operation Description
When doors are locked or unlocked by keyfob button operation, BCM blinks hazard warning lamps as a
reminder.
AUTO DOOR LOCK FUNCTION
JMKIB3322GB
Remote controller operation
Operation condition
Lock
• Key switch is off
• All doors are closed
Unlock
Key switch is off
Door lock operation
(With keyfob button)
Hazard warning lamp blink
Lock
Once
Unlock (all door unlock)
Twice
Unlock (anti-hijack operation)
Twice (quick)
DLK-392
< SYSTEM DESCRIPTION >
[TYPE 3]
REMOTE KEYLESS ENTRY SYSTEM
After door is unlocked by keyfob button operation and if 30 seconds or more passes without performing the fol-
lowing operation, all doors are automatically locked. However, operation check function does not activate.
Auto door lock mode can be changed by the “AUTO LOCK SET” mode in “WORK SUPPORT”. Refer to
396, "MULTI REMOTE ENT : CONSULT Function (BCM - MULTI REMOTE ENT) (Type 3)"
INTERIOR ROOM LAMP CONTROL FUNCTION
Interior room lamp is controlled according to door lock/unlock state, refer to
CONTROL SYSTEM : System Description"
SUPER LOCK FUNCTION
SUPER LOCK FUNCTION : System Diagram
INFOID:0000000010434962
SUPER LOCK FUNCTION : System Description
INFOID:0000000010434963
• Super lock provides a higher anti-theft performance than a conventional door lock function.
• BCM controls the super lock system.
• When all doors are closed super lock system can be set/release by keyfob.
• When super lock is set, inside handle of doors do not work.
SUPER LOCK SET OPERATION (LOCK OPERATION)
When Keyfob lock button is operated while all doors are in unlock state, super lock of all doors is set, and
simultaneously, all doors are locked.
SUPER LOCK RELEASE OPERATION (UNLOCK OERATION) WITH ANTI-HIJACK MODE
When Keyfob unlock button is operated while super lock of all doors is set, super lock of all doors is released,
and simultaneously, driver door are unlocked. When Keyfob unlock button is operated again, all doors are
unlocked.
SUPER LOCK RELEASE OPERATION (UNLOCK OERATION) WITHOUT ANTI-HIJACK MODE
When keyfob unlock button is operated while super lock of all doors is set, super lock of all doors is released,
and simultaneously, all doors are unlocked.
ANTI-HIJACK FUNCTION SETTING
With CONSULT
DLK-396, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK) (Type 3)"
Without CONSULT
• ON/OFF can be switched when keyfob lock button and unlock button are pressed simultaneously for 4 sec-
onds or more while steering lock is locked.
• When mode is switched, hazard warning lamp blinks.
Operating condition
• Door switch is ON (door is open)
• Door is locked
• Key switch is ON
JMKIB3323GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст