Nissan Qashqai J11. Manual — part 1937
PCS-20
< SYSTEM DESCRIPTION >
[IPDM E/R]
DIAGNOSIS SYSTEM (IPDM E/R)
ACTIVE TEST
WORK SUPPORT
NMB HL (LO) RH CIRC RETRY
[0 – 20]
Monitor the number of times that the smart FET in IPDM E/R permits the retry of the
headlamp (LO) (right) circuit.
NOTE:
When the number of short circuits in the headlamp (LO) (right) circuit count is 5 and
the ignition switch OFF to ON operation is detected, this item counts 1.
NMB HL (LO) RH CIRC SHORT
[0 – 5]
Monitor the number of times that the smart FET in IPDM E/R detects the over current
of the headlamp (LO) (right) circuit.
T LAMP LH CIRC MALFUNCTN
[0 – 1]
Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper
limit of the tail lamp (left) circuit.
NOTE:
When the number of tail lamp (left) circuit retries count is 20, this item counts 1.
NMB T LAMP LH CIRC RETRY
[0 – 20]
Monitor the number of times that the smart FET in IPDM E/R permits the retry of the
tail lamp (left) circuit.
NOTE:
When the number of short circuits in the tail lamp (left) circuit count is 5 and the igni-
tion switch OFF to ON operation is detected, this item counts 1.
NMB T LAMP LH CIRC SHORT
[0 – 5]
Monitor the number of times that the smart FET in IPDM E/R detects the over current
of the tail lamp (left) circuit.
T LAMP RH CIRC MALFUNCTN
[0 – 1]
Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper
limit of the tail lamp (right) circuit.
NOTE:
When the number of tail lamp (right) circuit retries count is 20, this item counts 1.
NMB T LAMP RH CIRC RETRY
[0 – 20]
Monitor the number of times that the smart FET in IPDM E/R permits the retry of the
tail lamp (right) circuit.
NOTE:
When the number of short circuits in the tail lamp (right) circuit count is 5 and the ig-
nition switch OFF to ON operation is detected, this item counts 1.
NMB T LAMP RH CIRC SHORT
[0 – 5]
Monitor the number of times that the smart FET in IPDM E/R detects the over current
of the tail lamp (right) circuit.
BATTERY STATUS
[OK/NG]
Monitor the battery status from the battery output.
Monitor Item
[Unit]
Description
Test item
Operation
Description
HORN
On
Operates horn relay for 20 ms.
FRONT WIPER
Off
OFF
Lo
Operates the front wiper relay.
Hi
Operates the front wiper relay and front wiper HI/LO relay.
HEAD LAMP WASHER
On
Operates the headlamp washer relay for 1 second.
EXTERNAL LAMPS
Off
OFF
TAIL
Operates the tail lamp relay.
Lo
Operates the headlamp low relay.
Hi
Operates the headlamp low relay and ON/OFF the headlamp high relay at 1
second intervals.
Fog
Operates the front fog lamp relay.
Work item
Description
SENSOR INITILALIZE
Adjusts the height sensor signal output value in the unloaded vehicle condition.
CML B/DCHRG CRNT CLEAR
In this mode, cumulative battery discharge current is cleared.
PCS
IPDM E/R
PCS-21
< ECU DIAGNOSIS INFORMATION >
[IPDM E/R]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ECU DIAGNOSIS INFORMATION
IPDM E/R
Reference Value
INFOID:0000000010499176
VALUES ON THE DIAGNOSIS TOOL
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Monitor
Condition
Value/Status
REVERSE SIGNAL
Ignition switch ON
Selector lever in R position
CLOSE
Selector lever in any position other
than R
OPEN
IGN RELAY
Ignition switch OFF
OPEN
Ignition switch ON
CLOSE
PUSH SW
Release the push-button ignition switch
OPEN
Press the push-button ignition switch
CLOSE
NEUTRAL SW
Ignition switch ON
Selector lever in N position
CLOSE
Selector lever in any position other
than N
OPEN
INTERLOCK/PNP SW
Ignition switch ON
Selector lever in P or N position
CLOSE
Selector lever in any position other
than P or N
OPEN
OIL PRESSURE SW
Ignition switch OFF or engine running
OPEN
Ignition switch ON
CLOSE
LED H/L RH STATUS
Lighting switch OFF
CLOSE
Lighting switch 2ND or AUTO (light is illuminated)
OPEN
LED H/L LH STATUS
Lighting switch OFF
CLOSE
Lighting switch 2ND or AUTO (light is illuminated)
OPEN
HOOD SW
Close the hood
OPEN
Open the hood
CLOSE
COMPRESSOR
Engine running
A/C switch OFF
Off
A/C switch ON
On
H/L WASHER PUMP
Not operating
Off
Headlamp washer operating
On
HORN RELAY
NOTE:
This item is indicated, but not used
Off
COOLING FAN
NOTE:
This item is indicated, but not monitored.
Off
FRONT WIPER HI/LO RE-
LAY
Ignition switch ON
Front wiper HI operated
On
Other than above
Off
FRONT WIPER RELAY
Ignition switch ON
Front wiper is operating
On
Other than above
Off
IGN RELAY OFF STATUS
Ignition switch OFF
On
Ignition switch ON
Off
IGN RELAY ON STATUS
Ignition switch OFF
Off
Ignition switch ON
On
PCS-22
< ECU DIAGNOSIS INFORMATION >
[IPDM E/R]
IPDM E/R
STEERING LOCK PWR
SPLY
NOTE:
Only models with Intelligent
Key
Ignition switch OFF
On
Ignition switch ON
Off
HEIGHT SENSOR PWR
SPLY
Ignition switch ON
On
Ignition switch OFF
Off
COOLING FAN RELAY 1
Cooling fan
Low speed operation
On
Stop or high speed operation
Off
STARTER RELAY
Engine
Cranking
On
Other than above
Off
COMP ECV DUTY
Engine running
A/C switch OFF
0 %
A/C switch ON
0 – 100 %
COOLING FAN RELAY 2
Cooling fan
Stop or low speed operation
0 %
High speed operation
100 %
FR FOG LAMP LH
Lighting switch 1ST, 2ND or AUTO
(light is illuminated)
Front fog lamp switch OFF
0 %
Front fog lamp switch ON
80 – 100 %
FR FOG LAMP RH
Lighting switch 1ST, 2ND or AUTO
(light is illuminated)
Front fog lamp switch OFF
0 %
Front fog lamp switch ON
80 – 100 %
LEVELIZER OUTPUT
Lighting switch 2ND or AUTO (light
is illuminated)
Headlamp aiming: Unloaded vehi-
cle condition
26.25 %
Headlamp aiming: Low
Value increases
from the unladen
status.
PARKING LAMP
Lighting switch OFF
0 %
Lighting switch 1ST, 2ND or AUTO (light is illuminated)
100 %
TAIL LAMP LH
Lighting switch OFF
0 %
Lighting switch 1ST, 2ND or AUTO (light is illuminated)
100 %
TAIL LAMP RH
Lighting switch OFF
0 %
Lighting switch 1ST, 2ND or AUTO (light is illuminated)
100 %
DAYTIME RUNNING LIGHT
LH
Engine running
Lighting switch 1ST
0 %
Lighting switch OFF
100 %
DAYTIME RUNNING LIGHT
RH
Engine running
Lighting switch 1ST
0 %
Lighting switch OFF
100 %
HEADLAMP (HI) LH
Lighting switch 2ND or AUTO (light
is illuminated)
Lighting switch HI or PASS
80 – 100 %
Lighting switch other than HI and
PASS
0 %
HEADLAMP (HI) RH
Lighting switch 2ND or AUTO (light
is illuminated)
Lighting switch HI or PASS
80 – 100 %
Lighting switch other than HI and
PASS
0 %
HEADLAMP (LO) LH
Lighting switch OFF
0 %
Lighting switch 2ND or AUTO (light is illuminated)
80 – 100 %
HEADLAMP (LO) RH
Lighting switch OFF
0 %
Lighting switch 2ND or AUTO (light is illuminated)
80 – 100 %
A/C RELAY STUCK
A/C relay
Normal
Off
On stuck
On
Monitor
Condition
Value/Status
PCS
IPDM E/R
PCS-23
< ECU DIAGNOSIS INFORMATION >
[IPDM E/R]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
A/C RELAY
Engine running
A/C switch OFF
Off
A/C switch ON
(A/C compressor is operating)
On
COMP ECV STATUS
Compressor
Normal
OK
Malfunction
NG
VEHICLE SECURITY HORN
NOTE:
This item is indicated, but not monitored.
Off
BATTERY CURRENT SEN-
SOR
Battery current sensor
Normal
OK
Malfunction
NG
FRONT FOG LAMP
Lighting switch 1ST, 2ND or AUTO
(light is illuminated)
Front fog lamp switch OFF
Off
Front fog lamp switch ON
On
COMP ECV CURRENT
Compressor
Operating
0.00 A – 1.00 A
Other than above
0.00 A
BATTERY VOLTAGE
Ignition switch ON
11 V – 14 V
COOLING FAN DUTY
Engine running
0 – 100%
HOOD SW (CAN)
Open the hood
OPEN
Close the hood
CLOSE
FRONT WIPER
Ignition switch ON
Front wiper stop
STOP
Front wiper INT or LO operation
LO
Front wiper other than INT or LO
operation
HI
FR WIPER STOP POSITION
Ignition switch ON
Front wiper stop position
STOP P
Any position other than front wiper
stop position
ACTIVE P
HEADLAMP (HI)
Lighting switch 2ND or AUTO (light
is illuminated)
Lighting switch HI or PASS
On
Lighting switch other than HI and
PASS
Off
HEADLAMP (LO)
Lighting switch OFF
Off
Lighting switch 2ND or AUTO (light is illuminated)
On
IGNITION RELAY STATUS
Ignition switch ON
On
Ignition switch OFF
Off
IGN RELAY MONITOR
Ignition switch ON
On
Ignition switch OFF
Off
IGNITION POWER SUPPLY
Ignition switch ON
On
Ignition switch OFF
Off
INTERLOCK/PNP SW (CAN)
Ignition switch ON
Selector lever in P or N position
On
Other than above
Off
NEUTRAL SWITCH (CAN)
Ignition switch ON
Selector lever in N position
On
Other than above
Off
PUSH-BUTTON IGN SW
(CAN)
NOTE:
Only models with Intelligent
Key
Release the push-button ignition switch
Off
Press the push-button ignition switch
On
TAIL LAMP
Lighting switch OFF
Off
Lighting switch 1ST, 2ND or AUTO (light is illuminated)
On
Monitor
Condition
Value/Status
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст