Nissan Qashqai J11. Manual — part 1041
VTL-10
< REMOVAL AND INSTALLATION >
DUCT AND GRILLE
Rear (For RUSSIA)
CENTER VENTILATOR GRILLE
CENTER VENTILATOR GRILLE : Removal and Installation
INFOID:0000000010451815
REMOVAL
1.
Apply protective tapes (A) on instrument panel assembly to pro-
tect from damage.
2.
Disengage fixing metal clips and pawls using remover tool (A), and then remove center ventilator grille
according to numerical order 1
→
3 indicated by arrows as shown in the figure.
JMIIA3377ZZ
1.
A/C unit assembly
2.
Rear ventilator duct 1
3.
Rear floor duct 1 LH
4.
Rear floor duct 2 LH
5.
Rear ventilator duct 2
6.
Console rear finisher
7.
Rear ventilator grille
8.
Rear floor duct 2 RH
9.
Console switch finisher
10. Rear floor duct 1 RH
: Clip
: Pawl
JMIIA3341ZZ
DUCT AND GRILLE
VTL-11
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
Rear (For RUSSIA)
CENTER VENTILATOR GRILLE
CENTER VENTILATOR GRILLE : Removal and Installation
INFOID:0000000010451815
REMOVAL
1.
Apply protective tapes (A) on instrument panel assembly to pro-
tect from damage.
2.
Disengage fixing metal clips and pawls using remover tool (A), and then remove center ventilator grille
according to numerical order 1
→
3 indicated by arrows as shown in the figure.
JMIIA3377ZZ
1.
A/C unit assembly
2.
Rear ventilator duct 1
3.
Rear floor duct 1 LH
4.
Rear floor duct 2 LH
5.
Rear ventilator duct 2
6.
Console rear finisher
7.
Rear ventilator grille
8.
Rear floor duct 2 RH
9.
Console switch finisher
10. Rear floor duct 1 RH
: Clip
: Pawl
JMIIA3341ZZ
VTL-12
< REMOVAL AND INSTALLATION >
DUCT AND GRILLE
3.
Disconnect harness connector from center ventilator grille.
INSTALLATION
Install in the reverse order of removal.
SIDE VENTILATOR GRILLE
SIDE VENTILATOR GRILLE : Removal and Installation
INFOID:0000000010451816
REMOVAL
Driver Side
1.
Remove instrument mask (driver side). Refer to
IP-13, "Removal and Installation"
.
2.
Apply protective tape (A) on instrument panel assembly to pro-
tect from damage.
3.
Disengage fixing pawls using remover tool (A), and then remove
side ventilator grille (finisher portion) (1).
: Pawl
: Metal clip
JMIIA3417ZZ
JMIIA3343ZZ
: Pawl
JMIIA3374ZZ
DUCT AND GRILLE
VTL-13
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
4.
Disengage fixing metal clips, and then remove side ventilator
grille (case portion) according numerical order 1
→
2 indicated by
arrows as shown in the figure.
Passenger Side
1.
Remove instrument mask (passenger side). Refer to
IP-13, "Removal and Installation"
.
2.
Apply protective tape (A) on instrument panel assembly to pro-
tect from damage.
3.
Disengage fixing pawls using remover tool (A), and then remove
side ventilator grille (finisher portion) (1).
4.
Disengage fixing metal clips, and then remove side ventilator
grille (case portion) by arrows as shown in the figure.
INSTALLATION
Install in the reverse order of removal.
CENTER VENTILATOR DUCT
CENTER VENTILATOR DUCT : Removal and Installation
INFOID:0000000010451817
REMOVAL
1.
Remove instrument panel assembly. Refer to
IP-13, "Removal and Installation"
.
: Metal clip
JMIIA3375ZZ
JMIIA3342ZZ
: Pawl
JMIIA3378ZZ
: Metal clip
JMIIA3379ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст