Nissan Qashqai J11. Manual — part 2152
DAS-22
< SYSTEM DESCRIPTION >
[DRIVER ASSISTANCE SYSTEM]
SYSTEM
MOD : System Description
INFOID:0000000010416790
SYSTEM DIAGRAM
INPUT/OUTPUT SIGNAL ITEM
Input Signal Item
Output Signal Item
FUNCTION DESCRIPTION
JMOIA0027GB
Transmit unit
Signal name
Description
ECM
CAN communication
Engine speed signal
Receives engine status
BCM
CAN communication
Back door open status signal
Receives back door open status
Light status signal
Receives light status
Turn signal
Receives turn signal status
ABS actuator
and electric unit
(control unit)
CAN communication
Wheel speed signal
Receives wheel speed
TCM
CAN communication
Shift selector position signal
Receives shift selector position
Combination
meter
CAN communication
Moving Object Detection ON/
OFF signal
Receives the ON/OFF status for Moving Object Detection
function
Rear view cam-
era
Communication line
Video signal
Receives the Rear View Camera image from camera for
Moving Object Detection function in around view monitor
control unit
Reception unit
Signal name
Description
Warning system
buzzer
Warning buzzer signal
Activates the warning buzzer
NAVI control
unit display
CAN communication
Visual signal request
Transmits a visual signal request from the around view
monitor control unit to display Rear View while the shift
selector is in R (reverse).
DAS
SYSTEM
DAS-23
< SYSTEM DESCRIPTION >
[DRIVER ASSISTANCE SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
• The Moving Object Detection (MOD) system can help alert the
driver of approaching vehicles or rear objects when the driver is
backing out of a parking space.
• The MOD system comprises of the rear view camera as the main
detection system, which is located on the trunk as illustrated.
• The MOD system operates at speeds below 8 km/h (5 MPH)
whenever the vehicle is in R (reverse).
• The MOD system uses the rear view camera to detect approach-
ing moving objects from either side.
• The MOD system can detect moving objects on either side as
close as rear obstacles of up to approximately 3.0 m (10.0 ft).
OPERATION DESCRIPTION
• Around view monitor control unit enables Moving Object Detection system.
• Combination meter turns Moving Object Detection ON indicator lamp ON/OFF according to the signals from
around view monitor control unit via CAN communication.
• Around view monitor control unit starts the control as follows, based on a vehicle detection signal.
Operation Condition of Moving Object Detection System
Around view monitor control unit performs the control when the following conditions are satisfied:
• Moving Object Detection ON indicator: ON
• When the vehicle is moving in R (reverse) at 8 km/h (5 MPH) or less.
NOTE:
• When the Moving Object Detection system setting on the Vehicle Information Display is ON.
• Moving Object Detection braking will not operate or will stop operating and only a warning chime will sound
under the following conditions:
- When driving with a tire that is not within normal tire conditions (pressure, wear, chain, spare, etc.)
- When the vehicle is equipped with non-original brake parts or suspension parts.
• Do not use the MOD system when towing a trailer.
• Excessive noise such as the audio system will interfere with the chime sound, and it may not be heard.
TSR
ALOIA0162ZZ
ALOIA0163ZZ
ALOIA0164ZZ
DAS-24
< SYSTEM DESCRIPTION >
[DRIVER ASSISTANCE SYSTEM]
SYSTEM
TSR : System Description
INFOID:0000000010502948
SYSTEM DIAGRAM
INPUT/OUTPUT SIGNAL ITEM
Input Signal Item
Output Signal Item
FUNCTION DESCRIPTION
Displays the road conditions as identified by the front camera unit on the information display, and alerts the
driver. Identifies the following information.
• Speed limit sign
OPERATION DESCRIPTION
• Traffic sign detection system is controlled by the front camera unit.
Operation Condition
• TSR (Traffic Sign Recognition): ON
DAA
JMOIA0068GB
Transmit unit
Signal name
Description
ABS actuator
and electric unit
(control unit)
CAN com-
munica-
tion
Vehicle speed signal (ABS)
Receives the wheel speed of the four wheels
Combination
meter
CAN com-
munica-
tion
System selection signal
Receives the selection status of each item in “Driving
Assistance selected using the combination meter
Steering angle
sensor
CAN com-
munica-
tion
Steering angle sensor signal
Receives the number of revolutions, turning direction of
the steering wheel
NAVI control
unit
CAN com-
munica-
tion
Speed limit information signal
Receives speed limit information in navigation data
Reception unit
Signal name
Description
Combination
meter
CAN commu-
nication
Meter display
signal
Speed limit sign signal
Transmits a signal and displays the status on the ve-
hicle information display
Transmits the buzzer drive signal and sounds buzzer
DAS
SYSTEM
DAS-25
< SYSTEM DESCRIPTION >
[DRIVER ASSISTANCE SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
DAA : System Description
INFOID:0000000010502947
SYSTEM DIAGRAM
INPUT/OUTPUT SIGNAL ITEM
FUNCTION DESCRIPTION
• Operates when the vehicle speed is 60 km/h (37 MPH) or higher.
• Detects the steering status and judges the attentiveness of the driver. The driver's attentiveness is shown on
the vehicle information display in eight stages (level indicator).
• When it is judged from the degree of minor swerving in the steering operation that the vehicle is drifting, the
driver is prompted to exert caution by the drift warning, which displays on the combination meter, and by a
buzzer sound.
• When the engine is stopped, the system is reset.
• When the level indicator on the drift warning display becomes 1, the system warns the driver with a buzzer
sound.
OPERATION DESCRIPTION
• The DAA (Driver Attention Alert) is controlled by the Around View Monitor control unit.
• ON/OFF of the Driver Attention Alert is performed by using the combination meter.
• The steering angle sensor detects the degree of swerving in the steering operation.
• When the Around View Monitor control unit judges that the steering operation is drifting (when the level indi-
cator in the drift warning display becomes 1), the following control is performed and the driver is warned.
- Transmits the buzzer output signal to the combination meter and sounds the buzzer.
Operation Condition
• Driver Attention Alert: ON
• Vehicle speed approximately 60 km/h (37 MPH) or more
NOTE:
• Drift warning can be set to ON/OFF using the combination meter.
• When the engine is stopped, the system is reset.
JMOIA0069GB
Reception unit
unit
Transmit unit
Signal name
Description
Around view
monitor control
unit
ABS actuator
and electric unit
(control unit)
CAN com-
munication
Vehicle speed signal (ABS)
Receives the vehicle speed signal
BCM
CAN com-
munication
Turn indicator signal
Receives the operation status of the turn
signal lamps and hazard lamps
Steering angle
sensor
CAN com-
munication
Steering angle sensor signal
Receives the amount of rotation, rotational
angle, and rotational direction of the steer-
ing wheel
Combination
meter
Around view
monitor control
unit
CAN com-
munication
Meter display
signal
System display
Transmits a signal and displays the status
on the vehicle information display
Buzzer signal
Operates the buzzer
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст