Nissan Qashqai J11. Manual — part 945
SYSTEM
BRC-17
< SYSTEM DESCRIPTION >
[WITH ESP]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
VALVE OPERATION (OTHER THAN ABS AND EBD)
Each valve is operated and fluid pressure of brake caliper is controlled.
NOTE:
There is no operation to hold and increase pressure for functions other than ABS and EBD.
When Pressure Increases
Component
FUNCTION
Reservoir
Temporarily reserves the brake fluid drained from brake caliper, so that pressure efficiently decreas-
es when decreasing pressure of brake caliper.
Pump
Returns the brake fluid reserved in reservoir to master cylinder by reducing pressure.
Motor
Drives the pump according to signals from control unit.
ABS IN valve
Switches the fluid pressure line to increase or hold according to signals from control unit.
ABS OUT valve
Switches the fluid pressure line to increase, hold or decrease according to signals from control unit.
Return check valve
Returns the brake fluid from brake caliper to master cylinder by bypassing orifice of each valve when
brake is released.
Cut valve 1
Cut valve 2
Performs the duty control of fluid pressure increased by pump according to signals from control unit.
Pressure Sensor
Detects the brake pedal operation amount.
JPFIC0162GB
BRC-18
< SYSTEM DESCRIPTION >
[WITH ESP]
SYSTEM
When front RH wheel caliper pressure increases
• Motor is activated. Brake fluid from pump is supplied to front RH wheel caliper through ABS IN valve. For
other wheel, ABS IN valve is closed and brakes fluid is not supplied to caliper.
When front LH wheel caliper pressure increases
• Motor is activated. Brake fluid from pump is supplied to front LH wheel caliper through ABS IN valve. For
other wheel, ABS IN valve is closed and brakes fluid is not supplied to caliper.
When rear RH wheel caliper pressure increases
• Motor is activated. Brake fluid from pump is supplied to rear RH wheel caliper through ABS IN valve. For
other wheel, ABS IN valve is closed and brakes fluid is not supplied to caliper.
When rear LH wheel caliper pressure increases
• Motor is activated. Brake fluid from pump is supplied to rear LH wheel caliper through ABS IN valve. For
other wheel, ABS IN valve is closed and brakes fluid is not supplied to caliper.
Name
Not activated
When Pressure Increases
Cut valve 1
Power supply is not supplied (open)
Wheel other than the one that the pressure
is to be increased: Power supply is not sup-
plied (open)
Only wheel that the pressure is to be in-
creased: Power supply is supplied (close)
Cut valve 2
Power supply is not supplied (open)
Wheel other than the one that the pressure
is to be increased: Power supply is not sup-
plied (open)
Only wheel that the pressure is to be in-
creased: Power supply is supplied (close)
ABS IN valve
Power supply is not supplied (open)
Only wheel that the pressure is to be in-
creased: Power supply is not supplied
(open)
Wheel other than the one that the pressure
is to be increased: Power supply is supplied
(close)
ABS OUT valve
Power supply is not supplied (close)
Power supply is not supplied (close)
Each caliper (fluid pressure)
—
Pressure increases
SYSTEM
BRC-19
< SYSTEM DESCRIPTION >
[WITH ESP]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
Released
When front RH wheel caliper pressure decreases
• Being returned to master cylinder through ABS IN valve, fluid pressure of brake caliper is decreased.
When front LH wheel caliper pressure decreases
• Being returned to master cylinder through ABS IN valve, fluid pressure of brake caliper is decreased.
When rear RH wheel caliper pressure decreases
• Being returned to master cylinder through ABS IN valve, fluid pressure of brake caliper is decreased.
When rear LH wheel caliper pressure decreases
• Being returned to master cylinder through ABS IN valve, fluid pressure of brake caliper is decreased.
Component Parts and Function
JPFIC0163GB
Name
Not activated
When pressure decreases
Cut valve 1
Power supply is not supplied (open)
Power supply is not supplied (open)
Cut valve 2
Power supply is not supplied (open)
Power supply is not supplied (open)
ABS IN valve
Power supply is not supplied (open)
Power supply is not supplied (open)
ABS OUT valve
Power supply is not supplied (close)
Power supply is supplied (open)
Each caliper (fluid pressure)
—
Pressure decreases
Component
Function
Reservoir
Temporarily reserves the brake fluid drained from brake caliper, so that pressure efficiently decreas-
es when decreasing pressure of brake caliper.
Pump
Returns the brake fluid reserved in reservoir to master cylinder by reducing pressure.
Motor
Drives the pump according to signals from control unit.
ABS IN valve
Switches the fluid pressure line to increase or hold according to signals from control unit.
BRC-20
< SYSTEM DESCRIPTION >
[WITH ESP]
SYSTEM
CONDITION FOR TURN ON THE WARNING LAMP
Turns ON when ignition switch turns ON and turns OFF when the system is normal, for bulb check purposes.
CONDITION FOR TURN ON THE INDICATOR LAMP
VDC OFF indicator lamp
• Turns ON when VDC function and TCS function are switched to non-operational status (OFF) by VDC OFF
switch.
• Turns ON when ignition switch turns ON and turns OFF when the system is normal, for bulb check purposes.
ABS OUT valve
Switches the fluid pressure line to increase, hold or decrease according to signals from control unit.
Return check valve
Returns the brake fluid from brake caliper to master cylinder by bypassing orifice of each valve when
brake is released.
Cut valve 1
Cut valve 2
Performs the duty control of fluid pressure increased by pump according to signals from control unit.
Pressure Sensor
Detects the brake pedal operation amount.
Component
Function
Condition (status)
ABS warning lamp
Brake warning lamp
VDC warning lamp
Ignition switch OFF.
OFF
OFF
OFF
For approx. 1 seconds after the ignition switch is turned ON
ON
ON
ON
Approx. 1 seconds after ignition switch is turned ON (when the
system is in normal operation).
OFF
OFF
OFF
After engine starts
OFF
OFF
OFF
When brake fluid is less than the specified level (brake fluid level
switch ON)
OFF
ON
OFF
When parking brake operates (parking brake switch ON)
OFF
ON
OFF
VDC function is malfunctioning
OFF
OFF
ON
TCS function is malfunctioning
OFF
OFF
ON
ABS function is malfunctioning
ON
OFF
ON
EBD function is malfunctioning
ON
ON
ON
Brake limited slip differential (BLSD) function is malfunctioning
OFF
OFF
ON
Brake assist function is malfunctioning
OFF
OFF
ON
hill start assist function is malfunctioning
OFF
OFF
ON
Brake force distribution function is malfunctioning
OFF
OFF
ON
When brake booster vacuum decreases
OFF
ON
OFF
When vacuum sensor is malfunctioning
OFF
ON
OFF
VDC function is operating
OFF
OFF
Blinking
TCS function is operating
OFF
OFF
Blinking
ABS function is operating
OFF
OFF
OFF
EBD function is operating
OFF
OFF
OFF
Brake limited slip differential (BLSD) function is operating
OFF
OFF
Blinking
Brake assist function is operating
OFF
OFF
OFF
hill start assist function is operating
OFF
OFF
OFF
Condition (status)
VDC OFF indicator lamp
Ignition switch OFF.
OFF
For approx. 1 seconds after the ignition switch is turned ON.
ON
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст