Nissan Qashqai J11. Manual — part 1234
COMPONENT PARTS
DLK-205
< SYSTEM DESCRIPTION >
[TYPE 2]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000010434759
1.
Front door lock assembly (passenger
side)
2.
SYSTEM : Component Parts Loca-
tion"
3.
Push-button ignition switch
4.
Combination meter
5.
Front power window switch (passen-
ger side) (door lock and unlock switch)
6.
Door switch
7.
Door lock assembly
8.
Back door lock assembly
9.
Back door opener switch assembly
10. Inside key antenna (luggage room)
11.
Inside key antenna (console)
12. Indicator unit (door lock status indica-
tor)
13. Intelligent Key warning buzzer
14. Outside key antenna
15. Door request switch
16. Outside antenna (rear bumper)
A.
View with luggage room
B.
View with center console assembly re-
moved
C.
View with instrument panel
D.
View with front bumper removed
E.
View with door panel
F.
View with rear bumper removed
JMKIB3270ZZ
DLK-206
< SYSTEM DESCRIPTION >
[TYPE 2]
COMPONENT PARTS
Component Description
INFOID:0000000010434760
Item
Function
Door lock and unlock switch
• Transmits door lock/unlock operation to BCM.
• Integrated in the power window main switch and center console assembly.
Combination meter
• Performs operation method guide and warning with buzzer.
• Transmits vehicle speed signal to CAN communication line.
Push-button ignition switch
• BCM transmits the change in the power supply position with the push-button ignition switch
to IPDM E/R via CAN communication line. IPDM E/R transmits the power supply position
status via CAN communication line to BCM.
• Immobilizer antenna amp checks Intelligent Key transponder.
BCM
BCM detects the vehicle status according to signals from each door switch and each outside/
inside key antenna. BCM transmits drive signal to door lock actuator when BCM receives op-
eration signal from remote keyless entry receiver and each switch.
Refer to
BCS-6, "BODY CONTROL SYSTEM : Component Parts Location"
for detailed in-
stallation location.
Door lock actuator
• Inputs locks/unlocks signal from BCM and locks/unlocks each door.
• Integrated in each door lock assembly.
Door request switch
• Transmits door lock/unlock operation to BCM.
• Integrated in the outside handle (driver side, passenger side and back door).
Door switch
Detects door open/close condition.
Inside key antenna
• Detects whether Intelligent Key is inside the vehicle.
• Installed in the instrument center, consol and luggage room.
Intelligent Key warning buzzer
Warns for an inappropriate operation.
Outside key antenna
• Detects whether Intelligent Key is outside the vehicle.
• Integrated in the outside handle.
Intelligent Key
The following functions are available when having and carrying electronic ID.
• Door lock/unlock
• Engine start
• Remote control entry function is available when operating on button.
Unlock sensor
Built-in in driver side door lock assembly
• Detects door lock condition of driver door
SYSTEM (POWER DOOR LOCK SYSTEM)
DLK-207
< SYSTEM DESCRIPTION >
[TYPE 2]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
SYSTEM (POWER DOOR LOCK SYSTEM)
System Diagram
INFOID:0000000010434761
System Description
INFOID:0000000010434762
DOOR LOCK FUNCTION
Door Lock and Unlock Switch
• The door lock and unlock switch (driver side) is built into power window main switch.
• The door lock and unlock switch (passenger side) is built into front power window switch (passenger side).
• Interlocked with the locking operation of door lock and unlock switch, door lock actuators of all doors are
locked.
• Interlocked with the unlocking operation of door lock and unlock switch, door lock actuators of all doors actu-
ator are unlocked.
Unlock Sensor
• BCM locks all doors or unlocks all doors, when driver door lock knob is operated.
• With the mechanical key inserted in the door key cylinder on driver side, turning it to lock position, locks door
lock actuator of all doors.
• With the mechanical key inserted in the door key cylinder on driver side, turning it to unlock position, unlocks
door lock actuator of all doors.
Operation Condition
If all of the following conditions are satisfied, door lock and unlock operation is performed using the door lock
and unlock switch.
INTERIOR ROOM LAMP CONTROL FUNCTION
Interior room lamp is controlled according to door lock /unlock state, refer to
CONTROL SYSTEM : System Description"
AIR BAG INTERLOCK UNLOCK FUNCTION
When ignition switch is ON and BCM receives shock status signal, it operates automatically to unlock all
doors. Air bag diagnosis sensor unit sends the shock status signal to BCM via CAN communication.
IGNITION POSITION WARNING FUNCTION
All doors are locked once, but BCM immediately unlocks all doors, according to driver door lock status
detected by unlock sensor, when door lock operation is performed, driver door is open, and ignition position is
ON.
DOOR LOCK STATUS INDICATOR OPERATION
JMKIB2435GB
Door lock and unlock switch operation
Operation condition
LOCK/UNLOCK
• Doors are not locked by Intelligent Key, door request switch
and auto door lock function
• Ignition position warning function is not activated
DLK-208
< SYSTEM DESCRIPTION >
[TYPE 2]
SYSTEM (POWER DOOR LOCK SYSTEM)
The door lock status indicator indicates door lock status under the following condition.
UNLOCK LINK FUNCTION
When driver door or passenger door is opened using the override function, all doors are unlocked.
Unlock function operates when driver door or passenger door is open while all of the following conditions are
satisfied.
NOTE:
When anti-hijack function is activated, only the applicable door is unlocked.
Indicator operation
Ignition position
Door status
Lock operation
ON (30 minutes timer)
OFF
All doors are closed and door
is locked
Door lock and unlock switch
ON
ON
All doors are closed and door
is locked
Door lock and unlock switch
ON (1 minute timer)
OFF
All doors are closed and door
is locked
Intelligent Key, door request
switch or auto door lock func-
tion
ON
ON
All doors are closed and door
is locked
Intelligent Key, door request
switch or auto door lock func-
tion
ON
→
OFF
–
(All doors are closed
→
any
door is open) or (All doors are
locked
→
any door is un-
locked)
–
ON (timer is running)
→
ON
(timer is stop)
OFF
→
ON
–
–
ON
→
ON (30 minutes timer)
ON
→
OFF
–
Door lock and unlock switch
ON
→
ON (1 minute timer)
ON
→
OFF
–
Intelligent Key, door request
switch or auto door lock func-
tion
Operation condition
• Doors are locked by door lock/unlock switch or by automatic lock/unlock function
• Driver or passenger door switch is switched from OFF to ON
• Anti-hijack function is not activated
• Vehicle speed is 5 km/h (3 MPH) or less
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст