Nissan Qashqai J11. Manual — part 1758
EXL-334
< REMOVAL AND INSTALLATION >
[HALOGEN HEADLAMP]
LICENSE PLATE LAMP
LICENSE PLATE LAMP
Exploded View
INFOID:0000000010437160
Removal and Installation
INFOID:0000000010437161
CAUTION:
Disconnect battery negative terminal or remove power circuit fuse when performing the operation for
preventing electric leakage. Refer to
EXL-182, "Precautions for Removing Battery Terminal"
.
REMOVAL.
1.
Remove back door finisher. Refer to
EXT-45, "Removal and Installation"
2.
Disconnect license plate lamp harness connector.
3.
Disengage license plate lamp housing fixing pawl, and then remove license plate lamp housing.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000010437162
CAUTION:
• Disconnect the battery negative terminal or remove power circuit fuse when performing the opera-
tion for preventing electric leakage. Refer to
EXL-182, "Precautions for Removing Battery Terminal"
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned OFF.
Back door panel
Back door finisher
License plate lamp housing
License plate lamp bulb
License plate lamp bulb socket
: Pawl
JMLIA5101ZZ
LICENSE PLATE LAMP
EXL-335
< REMOVAL AND INSTALLATION >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
LICENSE PLATE LAMP BULB
1.
Remove back door finisher. Refer to
EXT-45, "Removal and Installation"
2.
Rotate the bulb socket counterclockwise and unlock it.
3.
Remove the bulb from the socket.
EXL-336
< REMOVAL AND INSTALLATION >
[HALOGEN HEADLAMP]
REAR REFLEX REFLECTOR
REAR REFLEX REFLECTOR
Exploded View
INFOID:0000000010437163
Removal and Installation
INFOID:0000000010437164
REMOVAL
1.
Remove rear bumper fascia. Refer to
EXT-23, "Removal and Installation"
2.
Remove rear reflex reflector mounting bolt and pawls, and then remove rear reflex reflector.
INSTALLATION
Install in the reverse order of removal.
Rear reflex reflector
Rear bumper fascia assembly
: Pawl
JMLIA5103ZZ
SERVICE DATA AND SPECIFICATIONS (SDS)
EXL-337
< SERVICE DATA AND SPECIFICATIONS (SDS)
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Bulb Specifications
INFOID:0000000010437590
Bulb Specifications
Item
Type
Wattage (W)
Front combination lamp
Headlamp (HI)
H11
55
Headlamp (LO)
H7
55
Parking lamp/
daytime running light
LED
—
Front turn signal lamp
W21W
21
Front fog lamp
H8
35
Side turn signal lamp (built in door mirror)
LED
—
Rear combination lamp
(body side)
Tail lamp
LED
—
Stop lamp
LED
—
Rear turn signal lamp
WY21W
21
Rear combination lamp
(trunk lid side)
Tail lamp
LED
—
Back-up lamp
W16W
16
Rear fog lamp (driver side only)
W21W
21
License plate lamp
W5W
5
High-mounted stop lamp
LED
—
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст