Nissan Qashqai J11. Manual — part 1471
VEHICLE SECURITY SYSTEM CANNOT BE SET
SEC-183
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
VEHICLE SECURITY SYSTEM CANNOT BE SET
INTELLIGENT KEY
INTELLIGENT KEY : Description
INFOID:0000000010338019
Armed phase is not activated when door is locked using Intelligent Key.
NOTE:
Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and check
each symptom.
CONDITION OF VEHICLE (OPERATING CONDITION)
Confirm that the setting of “SECURITY ALARM SET” is “ON” in “WORK SUPPORT” mode of “THEFT ALM”of
“BCM” using CONSULT.
INTELLIGENT KEY : Diagnosis Procedure
INFOID:0000000010505182
1.
CHECK INTELLIGENT KEY SYSTEM (REMOTE KEYLESS ENTRY FUNCTION)
Press the LOCK button of Intelligent Key.
Are all doors LOCKED?
YES
>> GO TO 2.
NO
>> Check Intelligent Key system (remote keyless entry function). Refer to
2.
PERFORM SELF-DIAGNOSIS OF SIREN CONTROL UNIT
Perform self-diagnosis of siren control unit.
Refer to
SEC-48, "Diagnosis Description"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace malfunctioning parts.
3.
CHECK HOOD SWITCH
Check hood switch.
Refer to
SEC-171, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace hood switch.
4.
REPLACE BCM
BCS-135, "Removal and Installation"
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
DOOR REQUEST SWITCH
DOOR REQUEST SWITCH : Description
INFOID:0000000010338021
Armed phase is not activated when door is locked using door request switch.
NOTE:
Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and check
each symptom.
CONDITION OF VEHICLE (OPERATING CONDITION)
Confirm that the setting of “SECURITY ALARM SET” is “ON” in “WORK SUPPORT” mode of “THEFT ALM”of
“BCM” using CONSULT.
DOOR REQUEST SWITCH : Diagnosis Procedure
INFOID:0000000010505183
1.
CHECK INTELLIGENT KEY SYSTEM (DOOR LOCK FUNCTION)
SEC-184
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
VEHICLE SECURITY SYSTEM CANNOT BE SET
Carry the Intelligent Key and press the door request switch.
Are all doors LOCKED?
YES
>> GO TO 2.
NO
>> Check Intelligent Key system (door lock function). Refer to
SWITCHES : Diagnosis Procedure"
2.
PERFORM SELF-DIAGNOSIS OF SIREN CONTROL UNIT
Perform self-diagnosis of siren control unit.
Refer to
SEC-48, "Diagnosis Description"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace malfunctioning parts.
3.
CHECK HOOD SWITCH
Check hood switch.
Refer to
SEC-171, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace hood switch.
4.
REPLACE BCM
Replace BCM. Refer to
BCS-135, "Removal and Installation"
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
VEHICLE SECURITY ALARM DOES NOT ACTIVATE
SEC-185
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
VEHICLE SECURITY ALARM DOES NOT ACTIVATE
Description
INFOID:0000000010505184
Alarm does not operate when alarm operating condition is satisfied.
Diagnosis Procedure
INFOID:0000000010505185
1.
CHECK SENSOR CANCEL SWITCH
Check sensor cancel switch.
Refer to
SEC-176, "Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace sensor cancel switch.
2.
PERFORM SELF-DIAGNOSIS OF SIREN CONTROL UNIT
Perform self-diagnosis of siren control unit.
Refer to
SEC-48, "Diagnosis Description"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace malfunctioning parts.
3.
CHECK DOOR SWITCH
Check door switch.
Refer to
DLK-95, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace the malfunctioning door switch. Refer to
DLK-195, "Removal and Installation"
4.
CHECK HOOD SWITCH
Check hood switch.
Refer to
SEC-171, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Replace hood switch.
5.
CHECK INTRUDER SENSOR
Check intruder sensor.
Refer to
SEC-174, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Replace intruder sensor.
6.
REPLACE SIREN CONTROL UNIT
1.
Replace siren control unit.
2.
Confirm the operation after replacement.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> GO TO 7.
7.
REPLACE BCM
BCS-135, "Removal and Installation"
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
SEC-186
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTRUDER SENSOR CANNOT BE DEACTIVATED
INTRUDER SENSOR CANNOT BE DEACTIVATED
Diagnosis Procedure
INFOID:0000000010505189
1.
CHECK SENSOR CANCEL SWITCH
Check sensor cancel switch.
Refer to
SEC-176, "Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace sensor cancel switch.
2.
REPLACE SIREN CONTROL UNIT
1.
Replace siren control unit.
2.
Confirm the operation after replacement.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> GO TO 3.
3.
REPLACE BCM
Replace BCM. Refer to
BCS-135, "Removal and Installation"
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст