Nissan Qashqai J11. Manual — part 1030
SRC-58
< DTC/CIRCUIT DIAGNOSIS >
B0094 CRASH ZONE SENSOR
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3
minutes or more. (To discharge backup capacitor.)
• Never use unspecified tester or other measuring device.
1.
CHECK DTC
Perform each inspection according to the displayed DTC.
Which DTC is displayed?
[B0094–86]>> GO TO 4.
Other than the above>> GO TO 2.
2.
CHECK HARNESS CONNECTOR
Check the harness connector.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace harness connector.
3.
CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace wiring harness.
4.
REPLACE CRASH ZONE SENSOR
1.
Replace crash zone. Refer to
SR-24, "Removal and Installation"
2.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 5.
NO
>> INSPECTION END
5.
REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
1.
Replace air bag diagnosis sensor unit. Refer to
SR-28, "Removal and Installation"
2.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 1.
NO
>> INSPECTION END
B0096 B-PILLAR SATELLITE SENSOR
SRC-59
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
B0096 B-PILLAR SATELLITE SENSOR
DTC Description
INFOID:0000000010431054
DTC DETECTION LOGIC
POSSIBLE CAUSE
[B0096–11]
• Connection malfunction or short circuit to ground of harness and connector
• Internal malfunction of satellite sensor RH
• Internal malfunction of air bag diagnosis sensor unit
[B0096–23, B0096–24, B0096–25, B0096–28
• Internal malfunction of satellite sensor RH
• Internal malfunction of air bag diagnosis sensor unit
[B0096–81, B0096–93]
• Connection malfunction of harness or connector
• Internal malfunction of satellite sensor RH
• Internal malfunction of air bag diagnosis sensor unit
[B0096–86]
• Air bag diagnosis sensor unit and satellite sensor RH is different from the part specified
[B0096–88]
• Connection malfunction or open circuit of harness and connector
• Internal malfunction of satellite sensor RH
• Internal malfunction of air bag diagnosis sensor unit
FAIL-SAFE
—
DTC CONFIRMATION PROCEDURE
1.
CHECK SELF-DIAG RESULT
With CONSULT
1.
Turn ignition switch ON.
2.
Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT.
Is malfunctioning part detected?
YES
>> Refer to
NO-1
>> To check malfunction symptom before repair: Refer to
GI-41, "Intermittent Incident"
NO-2
>> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000010431055
WARNING:
DTC
CONSULT screen items
(Trouble diagnosis content)
DTC detecting condition
B0096–11
B-PILLAR SAT SEN RH
[Right Frontal Restraints Sensor 1(Subfault)]
Satellite sensor RH circuit is shorted to ground
B0096–23
Lower limit value malfunction of satellite sensor RH
B0096–24
Upper limit value malfunction of satellite sensor RH
B0096–25
Diagnosis malfunction of satellite sensor RH
B0096–28
Offset malfunction of satellite sensor RH
B0096–81
Communication malfunction of satellite sensor RH
B0096–86
Satellite sensor RH is out of the specified specification
B0096–88
Satellite sensor RH circuit is open
B0096–93
Reset malfunction of satellite sensor RH
SRC-60
< DTC/CIRCUIT DIAGNOSIS >
B0096 B-PILLAR SATELLITE SENSOR
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3
minutes or more. (To discharge backup capacitor.)
• Never use unspecified tester or other measuring device.
1.
CHECK DTC
Perform each inspection according to the displayed DTC.
Which DTC is displayed?
[B0096–86] >> GO TO 4.
Other than the above >> GO TO 2.
2.
CHECK HARNESS CONNECTOR
Check the harness connector.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace harness connector.
3.
CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace wiring harness.
4.
REPLACE SATELLITE SENSOR RH
1.
Replace satellite sensor RH. Refer to
SR-26, "Removal and Installation"
2.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 5.
NO
>> INSPECTION END
5.
REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
1.
Replace air bag diagnosis sensor unit. Refer to
SR-28, "Removal and Installation"
2.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 1.
NO
>> INSPECTION END
B00D2 FRONT PASSENGER AIR BAG ON INDICATOR
SRC-61
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
B00D2 FRONT PASSENGER AIR BAG ON INDICATOR
DTC Description
INFOID:0000000010431032
DTC DETECTION LOGIC
POSSIBLE CAUSE
[B00D2–04]
• Internal malfunction of front passenger air bag ON indicator
• Internal malfunction of air bag diagnosis sensor unit
[B00D2–11]
• Connection malfunction or short circuit to ground of harness and connector
• Internal malfunction of front passenger air bag ON indicator
• Internal malfunction of air bag diagnosis sensor unit
[B00D2–12]
• Connection malfunction or short circuit to power supply of harness and connector
• Internal malfunction of front passenger air bag ON indicator
• Internal malfunction of air bag diagnosis sensor unit
[B00D2–13]
• Connection malfunction or open circuit of harness and connector
• Internal malfunction of front passenger air bag ON indicator
• Internal malfunction of air bag diagnosis sensor unit
[B00D2–15]
• Connection malfunction or short circuit to power supply of harness and connector
• Connection malfunction or open circuit of harness and connector
• Internal malfunction of front passenger air bag ON indicator
• Internal malfunction of air bag diagnosis sensor unit
FAIL-SAFE
—
DTC CONFIRMATION PROCEDURE
1.
CHECK SELF-DIAG RESULT
With CONSULT
1.
Turn ignition switch ON.
2.
Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT.
Is malfunctioning part detected?
YES
>> Refer to
NO-1
>> To check malfunction symptom before repair: Refer to
GI-41, "Intermittent Incident"
NO-2
>> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000010431033
WARNING:
DTC
CONSULT screen items
(Trouble diagnosis content)
DTC detecting condition
B00D2–04
PASS A/B ON INDCTR CIRC
[Restraint System Malfunction Indicator 1
(Subfault)]
Malfunction in front passenger air bag ON indicator circuit
B00D2–11
Front passenger air bag ON indicator circuit is shorted to ground
B00D2–12
Front passenger air bag ON indicator circuit is shorted to power supply
circuit
B00D2–13
Front passenger air bag ON indicator circuit is open
B00D2–15
Front passenger air bag ON indicator circuit is open or shorted to power
supply circuit
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст