Nissan Qashqai J11. Manual — part 1828

BCS-38

< SYSTEM DESCRIPTION >

DIAGNOSIS SYSTEM (BCM)

*: For models without rear fog lamp, this item is displayed, but cannot be tested.

HEADLAMP : CONSULT Function (BCM - HEAD LAMP) (Halogen Headlamp)

INFOID:0000000010505171

WORK SUPPORT

*

1

: For models without auto light system, this item is displayed, but cannot be used.

*

2

: Factory setting

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

RR FOG LAMP*

On

Outputs voltage to turn the rear fog lamp ON.

Off

Stops the voltage to turn the rear fog lamp OFF.

STOP LAMP 1

On

Outputs voltage to turn the stop lamp RH ON.

Off

Stops the voltage to turn the stop lamp RH OFF.

STOP LAMP 2

On

Outputs voltage to turn the stop lamp LH ON.

Off

Stops the voltage to turn the stop lamp LH OFF.

STOP LAMP 3

On

Outputs voltage to turn the high-mounted stop lamp ON.

Off

Stops the voltage to turn the high-mounted stop lamp OFF.

Test item

Operation

Description

Service item

Setting item

Setting

CUSTOM A/LIGHT SET-

TING*

1

MODE 1*

2

Normal

MODE 2

More sensitive setting than normal setting. (Turns ON earlier than normal op-
eration.)

MODE 3

More sensitive setting than MODE 2. (Turns ON earlier than MODE 2.)

MODE 4

Less sensitive setting than normal setting. (Turns ON later than normal oper-
ation.)

TWILIGHT On

MODE 1

NOTE:
This item is displayed, but cannot be used.

MODE 2

WIPER LINK

MODE 1

NOTE:
This item is displayed, but cannot be used.

MODE 2

MODE 3

MODE 4

Monitor item

[Unit]

Description

PUSH SW
[On/Off]

Indicates [On/Off] condition of push-button ignition switch

ENGINE STATE
[STOP/STALL/CRANK/RUN]

Indicates [STOP/STALL/CRANK/RUN] condition of engine states

VEH SPEED 1
[km/h]

Indicates [km/h] condition of vehicle speed signal from combination meter

BCS

DIAGNOSIS SYSTEM (BCM)

BCS-39

< SYSTEM DESCRIPTION >

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

*

1

: For models without auto light system, this item is displayed, but cannot be monitored.

*

2

: For models without front fog lamp, this item is displayed, but cannot be monitored.

*

3

: For models without rear fog lamp, this item is displayed, but cannot be monitored.

ACTIVE TEST

TURN SIGNAL R
[On/Off]

Each switch status that BCM judges from the combination switch reading function.

TURN SIGNAL L
[On/Off]

TAIL LAMP SW
[On/Off]

HI BEAM SW
[On/Off]

HEADLAMP SW
[On/Off]

LIGHT OFF SW
[On/Off]

PASSING SW
[On/Off]

AUTO LIGHT SW*

1

[On/Off]

FR FOG SW*

2

[On/Off]

RR FOG SW*

3

[On/Off]

DOOR SW-DR
[On/Off]

Indicated [On/Off] condition of front door switch (driver side)

DOOR SW-AS
[On/Off]

Indicated [On/Off] condition of front door switch (passenger side)

DOOR SW-RR
[On/Off]

Indicated [On/Off] condition of rear door switch RH

DOOR SW-RL
[On/Off]

Indicated [On/Off] condition of rear door switch LH

DOOR SW-BK
[On/Off]

Indicated [On/Off] condition of back door switch

OPTI SEN (DTCT)
[V]

NOTE:
This item is displayed, but cannot be monitored.

OPTI SEN (FILT)
[V]

NOTE:
This item is displayed, but cannot be monitored.

OPTICAL SENSOR*

1

[On/Off/NG]

The sensor condition received from light & rain sensor

Monitor item

[Unit]

Description

Test item

Operation

Description

FR FOG LAMP*

1

On

Transmits the front fog light request signal to IPDM E/R using CAN com-
munication to turn the front fog lamp ON.

Off

Stops the front fog light request signal transmission.

RR FOG LAMP*

2

On

Outputs voltage to turn the rear fog lamp ON.

Off

Stops the voltage to turn the rear fog lamp OFF.

STOP LAMP 1

On

Outputs voltage to turn the stop lamp RH ON.

Off

Stops the voltage to turn the stop lamp RH OFF.

BCS-40

< SYSTEM DESCRIPTION >

DIAGNOSIS SYSTEM (BCM)

*

1

: For models with front fog lamp, this item is displayed, but cannot be tested.

*

2

: For models without rear fog lamp, this item is displayed, but cannot be tested.

WIPER

WIPER : CONSULT Function - WIPER

INFOID:0000000010505179

WORK SUPPORT

*

1

: For models without light & rain sensor

*

2

: For models with light & rain sensor

*

3

: Factory setting for Europe, Russia or South Africa

*

4

: Factory setting except for Europe, Russia or South Africa

*

5

: Factory setting for all destination

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

STOP LAMP 2

On

Outputs voltage to turn the stop lamp LH ON.

Off

Stops the voltage to turn the stop lamp LH OFF.

STOP LAMP 3

On

Outputs voltage to turn the high-mounted stop lamp ON.

Off

Stops the voltage to turn the high-mounted stop lamp OFF.

Test item

Operation

Description

Service item

Setting item

Description

WIPER SPEED SET-

TING*

1

On*

3

Linked with vehicle speed
(Front wiper intermittent time linked with the vehicle speed and
wiper volume dial position.)

The setting of front wiper
INT operation can be
changed.

Off*

4

Not linked with vehicle speed
(Front wiper intermittent time linked with the wiper volume dial
position.)

RAIN SENSOR*

2

On*

5

Linked with light & rain sensor
(Front wiper intermittent time linked with the light & rain sensor,
vehicle speed, and wiper volume dial position)

The setting of front wiper
AUTO operation can be
changed

Off

Not linked with light & rain sensor
(Front wiper intermittent time linked with the vehicle speed and
wiper volume dial position)

FR RR DRIP

On*

5

Front wiper drop wipe and rear wiper drop wipe operation ON

The setting of drop wipe
operation can be
changed

Off

Front wiper drop wipe and rear wiper drop wipe operation OFF

REAR WIPER LINK
WITH REVERSE
SETTING

On

Rear wiper operation linked with reverse ON

The setting of rear wiper
operation linked with re-
verse can be changed

Off*

5

Rear wiper operation linked with reverse OFF

Monitor Item

[Unit]

Description

PUSH SW
[Off/On]

The switch status input from push-button ignition switch.

VEH SPEED 1
[km/h]

Displays the value of the vehicle speed signal received from combination meter via CAN com-
munication.

BCS

DIAGNOSIS SYSTEM (BCM)

BCS-41

< SYSTEM DESCRIPTION >

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

*: For models without headlamp washer switch, this item is indicated but is not used.

ACTIVE TEST

*: For models without headlamp washer, this item is indicated but is not used.

FLASHER

FLASHER : CONSULT Function (BCM - FLASHER) (LED Headlamp)

INFOID:0000000010505173

WORK SUPPORT

*: Factory setting

DATA MONITOR

NOTE:

FR WIPER HI
[Off/On]

Status of each switch judged by BCM using the combination switch reading function.

FR WIPER LOW
[Off/On]

FR WASHER SW
[Off/On]

FR WIPER INT
[Off/On]

FR WIPER STOP
[Off/On]

Displays the status of the front wiper stop position signal received from IPDM E/R via CAN
communication.

INT VOLUME
[1

−

7]

Status of each switch judged by BCM using the combination switch reading function.

RR WIPER ON
[Off/On]

Status of each switch judged by BCM using the combination switch reading function.

RR WIPER INT
[Off/On]

RR WASHER SW
[Off/On]

RR WIPER STOP
[Off/On]

Displays the status of the rear wiper stop position signal received from rear wiper motor.

H/L WSR SW*
[Off/On]

Status of headlamp washer switch judged by BCM.

RAIN SENSOR
[OFF/LOW/HIGH/SPLASH/NG]

Request signal from rain sensor detected by BCM is displayed.

Monitor Item

[Unit]

Description

Test item

Operation

Description

FR WIPER

Hi

Operates the front wiper HI operation.

Lo

Operates the front wiper LO operation.

INT

Operates the front wiper INT/AUTO operation.

Off

Stops the front wiper operation.

RR WIPER

On

Operates the rear wiper operation.

Off

Stops the rear wiper operation.

HEADLAMP WASHER*

On

Operates the headlamp washer operation.

Service item

Setting item

Setting

3-TIME FLASHER SETTING

On*

With 3-time flasher function

Off

Without 3-time flasher function