Nissan Qashqai J11. Manual — part 1549
BRM-24
< PREPARATION >
[FOR EUROPE (LHD)]
BODY COMPONENT PARTS
CAUTION:
If the high strength steel (ultra high strength steel) of this is broken, replace by assembly for the supply part.
NOTE:
• For the parts without a number described in the figure, it is supplied only with the assembly part that the part is included with.
• Tensile strength column shows the largest strength value of a part in the component part.
4WD : Body Component Parts
INFOID:0000000010354870
Refer to parts catalogue for the replacement parts.
Rear side member assembly (RH & LH)
590
×
Rear side member extension assembly (RH & LH)
780
×
No.
Parts name
Tensile strength
(MPa)
Both sided
anti-corrosive
precoated
steel sections
BODY COMPONENT PARTS
BRM-25
< PREPARATION >
[FOR EUROPE (LHD)]
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
Without sunroof models
With sunroof models
Right side
: Both sided anti-corrosive precoated steel sections
: High strength steel (HSS) sections
: Both sided anti-corrosive steel and HSS sections
JSKIA3886ZZ
BRM-26
< PREPARATION >
[FOR EUROPE (LHD)]
BODY COMPONENT PARTS
No.
Parts name
Tensile strength
(MPa)
Both sided
anti-corrosive
precoated
steel sections
Roof
Under 440
—
Front roof rail assembly
Under 440
—
1st roof bow
Under 440
—
2nd roof bow
Under 440
—
3rd roof bow
Under 440
—
4th roof bow
Under 440
—
Rear roof rail assembly
Under 440
—
Sunroof assembly
Under 440
—
Upper front roof rail
Under 440
—
Roof extension assembly
Under 440
—
Center roof bow
Under 440
—
Hood assembly
Under 440
×
Front fender assembly (RH & LH)
Under 440
×
Inner front side roof rail assembly (RH & LH)
450
—
Upper inner front pillar assembly (RH & LH)
590
—
Inner center pillar assembly (RH & LH)
d.
980MPa
caution
T=1.2 mm (0.047 in)
590
×
Outer side roof rail (RH & LH)
980MPa
caution
T=1.0 mm (0.039 in)
—
×
Outer front side body (RH & LH)
Under 440
×
Center pillar hinge brace assembly (RH &
LH)
e.
980MPa
caution
T=1.2 mm (0.047 in)
Under 440
×
Front pillar hinge brace assembly (RH &
LH)
f.
980MPa
caution
T=1.4 mm (0.055 in)
590
×
Lower front pillar hinge brace (RH & LH)
590
×
Front fender bracket (RH & LH)
Under 440
×
Outer sill reinforcement assembly (RH &
LH)
g.
980MPa
caution
T=1.0 mm (0.039 in)
Under 440
×
Lower front pillar reinforcement (RH & LH)
Under 440
×
Outer sill assembly (RH & LH)
Under 440
×
Rear fender assembly (RH & LH)
Under 440
×
Rear fender extension complete (RH & LH)
Under 440
—
Striker retainer assembly (RH & LH)
Under 440
—
Upper rear panel assembly
450
×
Upper rear bumper retainer
Under 440
×
Rear bumper stay assembly (RH & LH)
600
—
Rear bumper reinforcement assembly
1180MPa
caution
T=1.2 mm (0.047 in)
—
—
Back door assembly
Under 440
×
BODY COMPONENT PARTS
BRM-27
< PREPARATION >
[FOR EUROPE (LHD)]
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
CAUTION:
If the high strength steel (ultra high strength steel) of this is broken, replace by assembly for the supply part.
NOTE:
• For the parts without a number described in the figure, it is supplied only with the assembly part that the part is included with.
• Tensile strength column shows the largest strength value of a part in the component part.
Fuel filler base assembly
Under 440
—
Fuel filler lid assembly
Under 440
×
Inner rear pillar assembly (RH & LH)
Under 440
—
Inner rear pillar reinforcement (RH & LH)
Under 440
—
Lower inner rear pillar (RH & LH)
Under 440
—
Inner rear wheelhouse assembly (RH & LH)
Under 440
×
Outer rear wheelhouse assembly (RH & LH)
Under 440
×
Outer rear wheelhouse extension (RH & LH)
Under 440
×
Front door assembly (RH & LH)
Under 440
×
Outer front door (RH & LH)
Under 440
×
Rear door assembly (RH & LH)
Under 440
×
Outer rear door (RH & LH)
Under 440
×
No.
Parts name
Tensile strength
(MPa)
Both sided
anti-corrosive
precoated
steel sections
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст