Nissan Qashqai J11. Manual — part 591
STR-6
< SYSTEM DESCRIPTION >
COMPONENT PARTS
Starter motor
INFOID:0000000010430889
The starter motor plunger closes and the motor is supplied with bat-
tery power, which in turn cranks the engine, when the “S” terminal is
supplied with electric power.
JMBIA4360ZZ
SYSTEM
STR-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
A
STR
N
P
O
SYSTEM
STARTING SYSTEM
STARTING SYSTEM : System Description
INFOID:0000000010430891
SYSTEM DIAGRAM
CVT Models
MT Models
For Europe and Russia
JMBIA4623GB
JMBIA4622GB
STR-8
< SYSTEM DESCRIPTION >
SYSTEM
Except for Europe and Russia
NOTE:
For models without stop/start system, starter motor “B” terminal is connect to battery directly.
SYSTEM DESCRIPTION
CVT Models
• “B” terminal is constantly supplied with battery power*.
• When selector lever is P or N, power is supplied to starter control relay by transmission range switch.
• When starter operating condition is satisfied, IPDM E/R turns starter control relay ON by starter control relay
control signal.
• When engine cranking condition is satisfied, BCM turns starter relay ON by starter relay control signal.
• Then battery power is supplied to starter motor (“S” terminal) through starter relay and starter control relay.
M/T Models
For Europe and Russia
• “B” terminal is constantly supplied with battery power*.
• When starter operating condition is satisfied, IPDM E/R turns starter control relay ON by starter control relay
control signal.
• When engine cranking condition is satisfied, BCM turns starter relay ON by starter relay control signal.
• Then battery power is supplied to starter motor (“S” terminal) through starter relay and starter control relay.
Except for Europe and Russia
• “B” terminal is constantly supplied with battery power*.
• When the clutch pedal is depressed, power is supplied to starter control relay by clutch interlock switch.
• When starter operating condition is satisfied, IPDM E/R turns starter control relay ON by starter control relay
control signal.
• When engine cranking condition is satisfied, BCM turns starter relay ON by starter relay control signal.
• Then battery power is supplied to starter motor (“S” terminal) through starter relay and starter control relay.
*: For models with stop/start system, starter motor “B” terminal receives the battery power via engine restart
bypass relay.
JMBIA4641GB
STARTING SYSTEM
STR-9
< WIRING DIAGRAM >
C
D
E
F
G
H
I
J
K
L
M
A
STR
N
P
O
WIRING DIAGRAM
STARTING SYSTEM
Wiring Diagram
INFOID:0000000010430892
JRBWD1447GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст