Nissan Qashqai J11. Manual — part 2077
SN-102
< REMOVAL AND INSTALLATION >
[WITH PARKING SPACE MEASUREMENT]
SONAR CONTROL UNIT
SONAR CONTROL UNIT
Exploded View
INFOID:0000000010478063
E1NIA0092ZZ
1.
Front Space measurement sensor LH
*
2.
Front sonar outer sensor LH
3.
Front sonar inner sensor LH
4.
Front sonar buzzer (view of back side
of instrument lower panel LH)
5.
Rear sonar outer sensor RH
6.
Rear sonar inner sensor RH
7.
Rear sonar inner sensor LH
8.
Rear sonar outer sensor LH
9.
Rear sonar buzzer (view with parcel
shelf removed)
SN
SONAR CONTROL UNIT
SN-103
< REMOVAL AND INSTALLATION >
[WITH PARKING SPACE MEASUREMENT]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
*: Only for models with Parking Space Measurement sensors
Removal and Installation
INFOID:0000000010478064
REMOVAL
1.
Remove the instrument lower panel LH. Refer to
.
2.
Check the location of the Sonar Control Unit. Refer to
3.
Disconnect the harness connector from the Sonar Control Unit.
4.
Remove the screw from the sonar control unit and remove.
INSTALLATION
Installation is in the reverse order of removal.
10.
Transmission range switch (view with
front air duct removed)
11.
TCM (view with front air duct removed) 12.
Sonar control unit (view with instru-
ment lower panel LH removed)
13.
Combination meter
SN-104
< REMOVAL AND INSTALLATION >
[WITH PARKING SPACE MEASUREMENT]
BUZZER
BUZZER
BUZZER
BUZZER : Exploded View
INFOID:0000000010478065
E1NIA0092ZZ
1.
Front Space measurement sensor LH
*
2.
Front sonar outer sensor LH
3.
Front sonar inner sensor LH
4.
Front sonar buzzer (view of back side
of instrument lower panel LH)
5.
Rear sonar outer sensor RH
6.
Rear sonar inner sensor RH
7.
Rear sonar inner sensor LH
8.
Rear sonar outer sensor LH
9.
Rear sonar buzzer (view with parcel
shelf removed)
SN
BUZZER
SN-105
< REMOVAL AND INSTALLATION >
[WITH PARKING SPACE MEASUREMENT]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
*: Only for models with Parking Space Measurement sensors
BUZZER : Removal and Installation - Front
INFOID:0000000010478066
REMOVAL
1.
Remove the instrument lower panel LH. Refer to
.
2.
Check the location of the Front Buzzer. Refer to
SN-104, "BUZZER : Exploded View"
3.
Remove the screw from the Front Buzzer and remove.
INSTALLATION
Installation is in the reverse order or removal.
BUZZER : Removal and Installation - Rear
INFOID:0000000010478067
REMOVAL
1.
Remove the rear parcel shelf finisher. Refer to
.
2.
Check the location of the Rear Buzzer. Refer to
SN-104, "BUZZER : Exploded View"
3.
Disconnect the harness connector from the rear buzzer.
4.
Remove the clips and the rear buzzer.
INSTALLATION
Installation is in the reverse order of removal.
10.
Transmission range switch (view with
front air duct removed)
11.
TCM (view with front air duct removed) 12.
Sonar control unit (view with instru-
ment lower panel LH removed)
13.
Combination meter
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст