Nissan Qashqai J11. Manual — part 1150
HAC-236
< PRECAUTION >
[MANUAL HEATER ]
PRECAUTIONS
5.
Wait at least 3 minutes. For vehicle with the engine listed below, remove the battery terminal after a lapse
of the specified time.
CAUTION:
While waiting, never operate the vehicle such as locking, opening, and closing doors. Violation of
this caution results in the activation of ACC power supply according to the Auto ACC function.
6.
Remove 12V battery terminal.
CAUTION:
After installing 12V battery, always check self-diagnosis results of all ECUs and erase DTC.
D4D engine
: 20 minutes
HRA2DDT
: 12 minutes
K9K engine
: 4 minutes
M9R engine
: 4 minutes
R9M engine
: 4 minutes
V9X engine
: 4 minutes
COMPONENT PARTS
HAC-237
< SYSTEM DESCRIPTION >
[MANUAL HEATER ]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
MANUAL HEATER SYSTEM
MANUAL HEATER SYSTEM : Component Parts Location
INFOID:0000000010433388
Left side of A/C unit assembly
Right side of A/C unit assembly
JMIIA3543ZZ
HAC-238
< SYSTEM DESCRIPTION >
[MANUAL HEATER ]
COMPONENT PARTS
PTC HEATER CONTROL SYSTEM
No.
Component
Function
Ambient sensor
ECM
ECM transmits engine coolant temperature signal to A/C amp. via CAN com-
munication line.
Refer to
ECH-13, "Component Parts Location"
(HR engine models),
12, "Component Parts Location"
(R9M engine models) for detailed installation location.
Combination meter
Combination meter transmits ambient temperate signal and vehicle speed
signal to A/C amp. via CAN communication line.
Heater control (A/C amp.)
HAC-242, "Heater Control (A/C Amp.)"
Fan control amp.
HAC-242, "A/C UNIT ASSEMBLY : Fan Control Amp."
Air mix door motor
HAC-240, "A/C UNIT ASSEMBLY : Air Mix Door Motor"
Intake door motor
HAC-241, "A/C UNIT ASSEMBLY : Intake Door Motor"
Mode door motor
HAC-240, "A/C UNIT ASSEMBLY : Mode Door Motor"
Blower motor
COMPONENT PARTS
HAC-239
< SYSTEM DESCRIPTION >
[MANUAL HEATER ]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
PTC HEATER CONTROL SYSTEM : Component Parts Location
INFOID:0000000010499401
Right side of A/C unit assembly
JMIIA3547ZZ
No.
Component
Function
Ambient sensor
PTC relay-1/2/3
PTC relay is controlled by BCM, and supplies power supply to PTC heater.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст