Nissan Qashqai J11. Manual — part 1574
BRM-124
< VEHICLE INFORMATION >
[FOR EUROPE (RHD)]
BODY EXTERIOR PAINT COLOR
VEHICLE INFORMATION
BODY EXTERIOR PAINT COLOR
Body Exterior Paint Color
INFOID:0000000010308778
NOTE:
• S: 1-Coat solid
• 2M: 2-Coat Metallic
• 2S: 2-Coat solid
• 3P: 3-Coat pearl
• 2PM: 2-Coat Pearl metallic
Component
Color code
B326
BZ11
BKY0
BGAB
BKAD
BNAJ
BCAP
BRBN
BZ10
BQAB
Description
White
Black
Silver
Black
Gray
Red
Brown
Blue
Red
White
Paint type
note
S
2M
2M
2M
2M
2PM
2M
2M
2S
3P
Standard
clear coat
–
×
×
×
×
×
×
×
×
×
Door mirror cover
Body color
B326
BZ11
BKY0
BGAB
BKAD
BNAJ
BCAP
BRBN
BZ10
BQAB
Front grille molding
Chromium
plate
Cr
Cr
Cr
Cr
Cr
Cr
Cr
Cr
Cr
Cr
Front bumper fascia
Body color
B326
BZ11
BKY0
BGAB
BKAD
BNAJ
BCAP
BRBN
BZ10
BQAB
Fillet molding
Material color
–
–
–
–
–
–
–
–
–
–
Door outside handle
Chromium
plate
Cr
Cr
Cr
Cr
Cr
Cr
Cr
Cr
Cr
Cr
Rear spoiler
Body color
B326
BZ11
BKY0
BGAB
BKAD
BNAJ
BCAP
BRBN
BZ10
BQAB
Back door finisher
Body color
B326
BZ11
BKY0
BGAB
BKAD
BNAJ
BCAP
BRBN
BZ10
BQAB
Rear bumper fascia
Body color
B326
BZ11
BKY0
BGAB
BKAD
BNAJ
BCAP
BRBN
BZ10
BQAB
Door outside lower
molding
Material color
–
–
–
–
–
–
–
–
–
–
JSKIA3881ZZ
PRECAUTIONS
BRM-125
< PRECAUTION >
[FOR EUROPE (RHD)]
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
PRECAUTION
PRECAUTIONS
Precautions for Removing Battery Terminal
INFOID:0000000010503254
• With the adoption of Auto ACC function, ACC power is automatically supplied by operating the intelligent key
or remote keyless entry or by opening/closing the driver side door. In addition, ACC power is supplied even
after the ignition switch is turned to the OFF position, i.e. ACC power is supplied for a certain fixed time.
• When disconnecting the 12V battery terminal, turn off the ACC
power before disconnecting the 12V battery terminal, observing
“How to disconnect 12V battery terminal” described below.
NOTE:
Some ECUs operate for a certain fixed time even after ignition
switch is turned OFF and ignition power supply is stopped. If the
battery terminal is disconnected before ECU stops, accidental DTC
detection or ECU data damage may occur.
• For vehicles with the 2-batteries, be sure to connect the main bat-
tery and the sub battery before turning ON the ignition switch.
NOTE:
If the ignition switch is turned ON with any one of the terminals of
main battery and sub battery disconnected, then DTC may be detected.
• After installing the 12V battery, always check "Self Diagnosis Result" of all ECUs and erase DTC.
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to Instruction 1 or Instruction 2 described below.
For vehicles parked by ignition switch OFF, refer to Instruction 2.
INSTRUCTION 1
1.
Open the hood.
2.
Turn key switch to the OFF position with the driver side door opened.
3.
Get out of the vehicle and close the driver side door.
4.
Wait at least 3 minutes. For vehicle with the engine listed below, remove the battery terminal after a lapse
of the specified time.
CAUTION:
While waiting, never operate the vehicle such as locking, opening, and closing doors. Violation of
this caution results in the activation of ACC power supply according to the Auto ACC function.
5.
Remove 12V battery terminal.
CAUTION:
After installing 12V battery, always check self-diagnosis results of all ECUs and erase DTC.
INSTRUCTION 2 (FOR VEHICLES PARKED BY IGNITION SWITCH OFF)
1.
Unlock the door with intelligent key or remote keyless entry.
NOTE:
At this moment, ACC power is supplied.
2.
Open the driver side door.
3.
Open the hood.
4.
Close the driver side door.
5.
Wait at least 3 minutes.
SEF289H
D4D engine
: 20 minutes
HRA2DDT
: 12 minutes
K9K engine
: 4 minutes
M9R engine
: 4 minutes
R9M engine
: 4 minutes
V9X engine
: 4 minutes
BRM-126
< PRECAUTION >
[FOR EUROPE (RHD)]
PRECAUTIONS
CAUTION:
While waiting, never operate the vehicle such as locking, opening, and closing doors. Violation of
this caution results in the activation of ACC power supply according to the Auto ACC function.
6.
Remove 12V battery terminal.
CAUTION:
After installing 12V battery, always check self-diagnosis results of all ECUs and erase DTC.
REPAIRING HIGH STRENGTH STEEL
BRM-127
< PRECAUTION >
[FOR EUROPE (RHD)]
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
REPAIRING HIGH STRENGTH STEEL
High Strength Steel (HSS)
INFOID:0000000010498422
High strength steel is used for body panels in order to reduce vehicle weight.
Accordingly, precautions in repairing automotive bodies made of high strength steel are described below:
Tensile strength
Major applicable parts
440 - 780 MPa
• Trans control reinforcement
(Center front floor assembly component part)
• 2nd crossmember
(Front floor assembly component part)
• 3rd crossmember
(Front floor assembly component part)
• 3rd crossmember reinforcement
(Front floor assembly component part)
• Lower dash crossmember
(Lower dash assembly component part)
• Side dash
(Side dash assembly component part)
• Inner front pillar reinforcement
(Side dash assembly component part)
• Front suspension spring support
(Front strut housing assembly component part)
• Engine mounting bracket reinforcement
(Front strut housing assembly component part)
• Engine mounting bracket
(Front strut housing assembly component part)
• Front bumper reinforcement assembly
• Lower front bumper stay
• Front side member closing plate (Front)
(Side member closing plate assembly component part)
• Outer add on frame bracket
(Side member closing plate assembly component part)
• Closing plate reinforcement
(Side member closing plate assembly component part)
• Front side member assembly
• Engine mounting member bracket assembly
• Front suspension mounting rear bracket assembly
• Inner sill extension
(Rear side member assembly component part)
• Inner rear sill
(Rear side member assembly component part)
• Outer rear anchor reinforcement
(Rear side member assembly component part)
• Rear side member extension assembly
• Inner front side roof rail assembly
• Upper inner front pillar assembly
• Inner center pillar (Lower)
(Inner center pillar assembly component part)
• Lower front pillar hinge brace
• Rear bumper stay assembly
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст