Nissan Qashqai J11. Manual — part 514
EC9-212
< DTC/CIRCUIT DIAGNOSIS >
[R9M]
P0200 FUEL INJECTOR
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-41, "Intermittent Incident"
.
NO
>> Repair or replace error-detected parts.
Component Inspection (Fuel Injector)
INFOID:0000000010309139
1.
CHECK FUEL INJECTOR
1.
Turn ignition switch OFF.
2.
Disconnect fuel injector harness connector.
3.
Check the resistance between fuel injector terminals.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace fuel injector. Refer to
EM-404, "Removal and Installation"
.
Cylinder
+
-
Continuity
ECM
Fuel injector
Connector
Terminal
Connector
Terminal
No.1
F83
158
F62
1
Existed
160
2
No.2
154
F63
1
159
2
No.3
157
F64
1
155
2
No.4
153
F65
1
156
2
Fuel injector
Condition
Resistance
+
−
Terminal
1
2
Temperature: 20
°
C (68
°
F)
13.7 – 15.3
Ω
P0201, P0202, P0203, P0204 FUEL INJECTOR
EC9-213
< DTC/CIRCUIT DIAGNOSIS >
[R9M]
C
D
E
F
G
H
I
J
K
L
M
A
EC9
N
P
O
P0201, P0202, P0203, P0204 FUEL INJECTOR
DTC Logic
INFOID:0000000010309140
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
PRECONDITIONING
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 1 minute before conducting the next test.
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
Possible cause
P0201
CYLINDER 1 INJECTOR CIRC
(Injector circuit/open - cylinder 1)
• 1.DEF: AT MAXIMUM LIMIT
• 2.DEF: SIGNAL INCOHER-
ENCE
• 3.DEF: COMPARISON OF
CONFORMITY INFORMA-
TION (CHECKSUM)
• 4.DEF: ABOVE THE MAX
LEVEL
• 5.DEF: INCOHERENCE
• CO: OPEN CIRCUIT
• Injector code is incorrect.
• ECM detects fuel injectors circuit are
open or shorted.
• ECM error
• Harness or connectors
(The fuel injector circuit is open.)
• Fuel injector
• Injector code error
P0202
CYLINDER 2 INJECTOR CIRC
(Injector circuit/open - cylinder 2)
• 1.DEF: AT MAXIMUM LIMIT
• 2.DEF: SIGNAL INCOHER-
ENCE
• 3.DEF: COMPARISON OF
CONFORMITY INFORMA-
TION (CHECKSUM)
• 4.DEF: ABOVE THE MAX
LEVEL
• 5.DEF: INCOHERENCE
• CO: OPEN CIRCUIT
P0203
CYLINDER 3 INJECTOR CIRC
(Injector circuit/open - cylinder 3)
• 1.DEF: AT MAXIMUM LIMIT
• 2.DEF: SIGNAL INCOHER-
ENCE
• 3.DEF: COMPARISON OF
CONFORMITY INFORMA-
TION (CHECKSUM)
• 4.DEF: ABOVE THE MAX
LEVEL
• 5.DEF: INCOHERENCE
• CO: OPEN CIRCUIT
P0204
CYLINDER 4 INJECTOR CIRC
(Injector circuit/open - cylinder 4)
• 1.DEF: AT MAXIMUM LIMIT
• 2.DEF: SIGNAL INCOHER-
ENCE
• 3.DEF: COMPARISON OF
CONFORMITY INFORMA-
TION (CHECKSUM)
• 4.DEF: ABOVE THE MAX
LEVEL
• 5.DEF: INCOHERENCE
• CO: OPEN CIRCUIT
EC9-214
< DTC/CIRCUIT DIAGNOSIS >
[R9M]
P0201, P0202, P0203, P0204 FUEL INJECTOR
>> GO TO 2.
2.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Start engine and let it idle for at least 5 second.
2.
Check DTC.
Is DTC detected?
YES
>>
EC9-214, "Diagnosis Procedure"
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000010309141
1.
PERFORM FUEL INJECTOR ADJUSTMENT VALUE REGISTRATION
1.
Perform FUEL INJECTOR ADJUSTMENT VALUE REGISTRATION. Refer to
2.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected again?
YES
>> GO TO 2.
NO
>> INSPECTION END
2.
CHECK FUEL RETURN HOSE
Check Fuel return hose.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace error-detected parts.
3.
CHECK COMPRESSION PRESSURE
Check compression pressure.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Check pistons, piston rings, valves, valve seats and cylinder head gaskets.
4.
CHECK FUEL INJECTOR HARNESS CONNECTOR STATE
Check fuel injector harness connector state.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace error-detected parts.
5.
CHECK FUEL INJECTOR
EC9-215, "Component Inspection (Fuel Injector)"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace error-detected parts.
6.
CHECK FUEL INJECTOR CIRCUIT FOR OPEN AND SHORT
1.
Turn ignition switch OFF.
2.
Check fuel injector circuit for open and short.
P0201, P0202, P0203, P0204 FUEL INJECTOR
EC9-215
< DTC/CIRCUIT DIAGNOSIS >
[R9M]
C
D
E
F
G
H
I
J
K
L
M
A
EC9
N
P
O
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-41, "Intermittent Incident"
.
NO
>> Repair or replace error-detected parts.
Component Inspection (Fuel Injector)
INFOID:0000000010309142
1.
CHECK FUEL INJECTOR
1.
Turn ignition switch OFF.
2.
Disconnect fuel injector harness connector.
3.
Check the resistance between fuel injector terminals.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace fuel injector. Refer to
EM-404, "Removal and Installation"
.
Cylinder
+
-
Continuity
ECM
Fuel injector
Connector
Terminal
Connector
Terminal
No.1
F83
158
F62
1
Existed
160
2
No.2
154
F63
1
159
2
No.3
157
F64
1
155
2
No.4
153
F65
1
156
2
Fuel injector
Condition
Resistance
+
−
Terminal
1
2
Temperature: 20
°
C (68
°
F)
13.7 – 15.3
Ω
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст