Nissan Qashqai J11. Manual — part 2019
MWI-12
< SYSTEM DESCRIPTION >
SYSTEM (METER SYSTEM)
METER SYSTEM : Fail-safe
INFOID:0000000010329941
The combination meter activates the fail-safe control if the CAN communication lines between each unit are
malfunctioning.
System
Description
Reference
Measuring in-
struments
Speedometer
Indicates vehicle speed.
MWI-13,
"SPEEDOME-
TER : System De-
scription"
Tachometer
Indicates engine speed.
MWI-14, "TA-
CHOMETER :
System Descrip-
tion"
Engine coolant temperature gauge
Indicates engine coolant temperature.
MWI-14, "EN-
GINE COOLANT
TEMPERATURE
GAUGE : System
Description"
Fuel gauge
Indicates fuel level.
MWI-15, "FUEL
GAUGE : System
Description"
Information display
The Information display displays status, ac-
cording to system malfunction or vehicle
condition.
MWI-18, "INFOR-
MATION DIS-
PLAY : System
Description"
Meter illumi-
nation control
Meter illumination control function
Switches back and forth between daytime
mode and nighttime mode, according to a
light switch position.
MWI-16, "METER
ILLUMINATION
CONTROL : Sys-
tem Description"
Back light illumination control function
The operation of the illumination control
switch allows the brightness adjustment of
meter illumination.
Meter effect
function
Engine-start effect function
Controls pointers of combination meter,
back light illumination and information dis-
play at engine start to produce illumination
effects.
MWI-17, "METER
EFFECT FUNC-
TION : System
Description"
Driver welcome function
Controls meter illumination to produce illu-
mination effects when getting in the vehicle.
Function
Specifications
Speedometer
Reset to zero by suspending communication.
Tachometer
Engine coolant temperature gauge
Meter illumination control
When suspending communication, changes to
nighttime mode.
Buzzer
Turned off by suspending communication.
MWI
SYSTEM (METER SYSTEM)
MWI-13
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SPEEDOMETER
SPEEDOMETER : System Diagram
INFOID:0000000010329942
SPEEDOMETER : System Description
INFOID:0000000010329943
• The ABS actuator and electric unit (control unit) converts the rectangular wave signal provided by the wheel
sensor to a vehicle speed signal and transmits it to the combination meter via CAN communication.
• The combination meter indicates the vehicle speed to the speedometer according to the vehicle speed sig-
nal received via CAN communication.
TACHOMETER
Information dis-
play
Trip computer
Current fuel consumption
• When reception time of an abnormal signal is
2 seconds or less, the last received datum is
used for calculation to indicate the result.
• When reception time of an abnormal signal is
more than 2 seconds, the last result calculat-
ed during normal condition is indicated.
Average fuel consumption
Average vehicle speed
Range (Distance to empty)
Driving distance
An indicated value is maintained at communica-
tions blackout.
Interrupt indication
Door open warning
The indicator turns OFF by suspending commu-
nication.
Low tire pressure warning
Fuel filler cap warning
Odo/trip meter
An indicated value is maintained at communica-
tions blackout.
Shift position indicator
The indicator turns OFF by suspending commu-
nication.
Warning lamp/
indicator lamp
ABS warning lamp
Turned on by suspending communication.
Brake warning lamp
EPS warning lamp
VDC warning lamp
AWD warning lamp
Malfunction indicator lamp
VDC OFF indicator lamp
Turned off by suspending communication.
AWD LOCK indicator lamp
Engine oil pressure warning lamp
High beam indicator lamp
Turn signal indicator lamp
Position lamp indicator lamp
A/T CHECK indicator lamp
Low tire pressure warning lamp
After blinking for 1 minute, the lamp remains
ON.
Function
Specifications
JSNIA2973GB
MWI-14
< SYSTEM DESCRIPTION >
SYSTEM (METER SYSTEM)
TACHOMETER : System Diagram
INFOID:0000000010329944
TACHOMETER : System Description
INFOID:0000000010329945
• ECM converts the pulse signal provided by the crankshaft position sensor to an engine speed signal and
transmits it to the combination meter via CAN communication.
• The combination meter indicates the engine speed to the tachometer according to the engine speed signal
received via CAN communication.
ENGINE COOLANT TEMPERATURE GAUGE
ENGINE COOLANT TEMPERATURE GAUGE : System Diagram
INFOID:0000000010329946
ENGINE COOLANT TEMPERATURE GAUGE : System Description
INFOID:0000000010329947
• ECM reads the engine coolant temperature signal from the engine coolant temperature sensor and transmits
the signal to the combination meter via CAN communication.
• The combination meter indicates the engine coolant temperature to the engine coolant temperature gauge
according to the engine coolant temperature signal received via CAN communication.
FUEL GAUGE
FUEL GAUGE : System Diagram
INFOID:0000000010329948
2WD MODELS
JSNIA2974GB
JSNIA3015GB
E1NIA0078GB
MWI
SYSTEM (METER SYSTEM)
MWI-15
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
AWD MODELS
FUEL GAUGE : System Description
INFOID:0000000010329949
CONTROL OUTLINE
The combination meter reads the fuel level sensor signal from the fuel level sensor unit and indicates the fuel
level to the fuel gauge.
REFUEL CONTROL
The combination meter accelerates the fuel gauge segment if the all conditions listed below are met, or the
ignition switch is ON from OFF.
• Ignition switch is ON position.
• The vehicle is not moving.
• The fuel level change by 15 or more.
OIL PRESSURE WARNING LAMP
OIL PRESSURE WARNING LAMP : System Diagram
INFOID:0000000010329950
OIL PRESSURE WARNING LAMP : System Description
INFOID:0000000010329951
• IPDM E/R receives an engine oil pressure switch signal from the engine oil pressure switch and transmits
the signal to BCM via CAN communication.
• BCM transmits the engine oil pressure switch signal received from IPDM E/R to the combination meter via
CAN communication.
• The combination meter turns ON/OFF the engine oil pressure warning lamp, according to an engine oil pres-
sure switch signal received from BCM via CAN communication.
MASTER WARNING LAMP
JSNIA3055GB
JSNIA2464GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст