Nissan Qashqai J11. Manual — part 1951
PCS-76
< SYSTEM DESCRIPTION >
[POWER DISTRIBUTION SYSTEM]
SYSTEM
OPERATION FLOW
Ignition Switch On Status
In this status the ignition switch is operated and turned ON.
Audio / Navigation Available Status
• In this status the audio, navigation, and each switch and unit that is activated by the accessory power source
can be operated.
• When 10 minutes pass after conditions are satisfied while and audio and navigation are not operated, audio
and navigation turn OFF.
• When audio or navigation is operated within 10 minutes after conditions are satisfied, operation time is
extended for 10 minutes. Audio and navigation can be operated for a maximum of 30 minutes after the sta-
tus is satisfied.
Audio / navigation use intention check status
This is a status for checking the intention of using audio and navigation again after audio and navigation are
stopped.
Audio / navigation unavailable status
In this status audio and navigation become unavailable, but the switches and units other than those for audio
or navigation that can operate by using the accessory power source are available until the accessory power
source turns OFF.
OFF status
In this status the AUTO ACC function stops and power to the accessories is not supplied.
JMMIA1784GB
PCS
SYSTEM
PCS-77
< SYSTEM DESCRIPTION >
[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
No.
Function status
Shifting condition
Accessory power
source
• Shifting from "OFF status" to "Ignition switch ON
status"
• Shifting from "Audio / navigation unavailable
status" to "Ignition switch ON status"
• Shifting from "Audio / navigation use intention
confirmation status" to "Ignition switch ON sta-
tus"
Turn the ignition switch ON from OFF.
OFF
→
ON
• Shifting from "OFF status" to "Audio / navigation
available status"
• Shifting from "Audio / navigation unavailable
status" to "Audio / navigation available status"
• Models with Intelligent Key: Operate either the
door request switch or the unlock button of the
Intelligent Key to unlock the door.
• Models without Intelligent Key: Operate the un-
lock button of remote controller button to unlock
the door.
OFF
→
ON
Shifting from "Ignition switch ON status" to "Audio
/ navigation available status"
Turn the ignition switch OFF from ON while driver
door is closed.
ON
Shifting from "Audio / navigation available status"
to "Ignition switch ON status"
Turn the ignition switch ON from OFF.
ON
"Audio / navigation available status" Time exten-
sion (10 minutes)
Operate audio or navigation.
ON
Shifting from "Ignition switch ON status" to "Audio
/ navigation use intention confirmation status"
Turn the ignition switch OFF from ON while driver
door is open.
ON
Shifting from "Audio / navigation available status"
to "Audio / navigation use intention confirmation
status"
• For models with Intelligent Key, any of the fol-
lowing conditions is satisfied.
- Close all doors, and lock all doors with the Intel-
ligent Key or door request switch.
- Ten minutes pass from "Audio / navigation avail-
able status."
- When ignition switch has been shifted from ON
to OFF, open the driver door.
• For models without Intelligent Key, any of the
following conditions is satisfied.
- Close all doors, and lock all doors with the re-
mote controller button.
- Remove the key from the ignition key cylinder.
- Ten minutes pass from "Audio / navigation avail-
able status."
- When ignition switch has been shifted from ON
to OFF, open the driver door.
ON
Shifting from "Audio / navigation use intention con-
firmation status" to "Audio / navigation available
status"
Any of the following conditions is satisfied.
• Models with Intelligent Key: Operate either the
door request switch or the unlock button of the
Intelligent Key to unlock the door.
• Models without Intelligent Key: Operate the un-
lock button of remote controller button to unlock
the door.
• Operate audio or navigation power switch
ON
Shifting from "Audio / navigation available status"
to "Audio / navigation unavailable status"
Thirty minutes pass from "Audio / navigation avail-
able status."
ON
Shifting from "Audio / navigation use intention con-
firmation status" to "Audio / navigation unavailable
status"
Any of the following conditions is satisfied.
• Two minutes pass from "Audio / navigation use
intention confirmation status."
• In "Audio / navigation use intention confirmation
status," 30 minutes pass after "Audio / naviga-
tion available status" is satisfied.
ON
Shifting from "Audio / navigation unavailable sta-
tus" to "OFF status"
One minute passes from "Audio / navigation un-
available status."
ON
→
OFF
PCS-78
< SYSTEM DESCRIPTION >
[POWER DISTRIBUTION SYSTEM]
SYSTEM
Fail-safe
INFOID:0000000010434042
FAIL-SAFE CONTROL BY DTC
BCM performs fail-safe control when any DTC are detected.
Shifting from "OFF status" to "Audio / navigation
unavailable status"
Any of the following conditions is satisfied.
• Driver door is opened or closed.
• The steering lock operates.
OFF
→
ON
"Audio / navigation unavailable status" Time ex-
tension (1 minute)
Any of the following conditions is satisfied.
• Driver door is opened or closed.
• The steering lock operates.
ON
No.
Function status
Shifting condition
Accessory power
source
Display contents of CONSULT
Fail-safe
Cancellation
B2013: ID DISCORD BCM-S/L
Inhibit engine cranking
When communication between BCM and steering lock unit are commu-
nicated normally.
B2014: CHAIN OF S/L-BCM
Inhibit engine cranking
When communication between BCM and steering lock unit are commu-
nicated normally.
B2192: ID DISCORD BCM-ECM
Inhibit engine cranking
Erase DTC
B2193: CHAIN OF BCM-ECM
Inhibit engine cranking
Erase DTC
B2195: ANTI-SCANNING
Inhibit engine cranking
Ignition switch ON
→
OFF
B2196: DONGLE NG
Inhibit engine cranking
Erase DTC
B2198: NATS ANTENNA AMP
Inhibit engine cranking
Erase DTC
B25A0: LIN COMM ERROR
PWD MAIN SW
Operation with power
window main switch oth-
er than driver seat
When any of the following specified malfunctioning parts is replaced.
• LIN communication line
• Power window main switch
B25A1: LIN COMM ERR DRIVER
PWD ACTR
• Retained power func-
tion
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• LIN communication line
• Front power window motor (driver side)
B25A2: LIN COMM ERR ASSIST
PWD ACTR
• Operation with power
window main switch
• Retained power func-
tion
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• LIN communication line
• Front power window motor (passenger side)
B25A3: LIN COMM ERR REAR
PWD ACTR
• Operation with power
window main switch
• Retained power func-
tion
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• LIN communication line
• Rear power window motor
B25A4: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace front power window motor (driver side)
B25A5: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace front power window motor (driver side)
B25A6: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace front power window motor (driver side)
PCS
SYSTEM
PCS-79
< SYSTEM DESCRIPTION >
[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
B25A7: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace front power window motor (driver side)
B25A8: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace front power window motor (driver side)
B25A9: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified operations are performed.
• system initialization
• Replace front power window motor (driver side)
B25AA: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• Harness or connectors
• Front power window motor (driver side)
B25B6: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• Power window main switch
• Front power window motor (driver side)
B25B7: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• Power window main switch
• Front power window motor (driver side)
B25B8: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• Power window main switch
• Front power window motor (driver side)
B25B9: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• Power window main switch
• Front power window motor (driver side)
B25BA: PASS PWR WNDW
ACTR MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace front power window motor (passenger side)
B25BB: PASS PWR WNDW
ACTR MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace front power window motor (passenger side)
B25BC: PASS PWR WNDW
ACTR MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace front power window motor (passenger side)
B25BD: PASS PWR WNDW
ACTR MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace front power window motor (passenger side)
B25BE: PASS PWR WNDW
ACTR MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace front power window motor (passenger side)
B25BF: PASS PWR WNDW
ACTR MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified operations are performed.
• system initialization
• Replace front power window motor (passenger side)
Display contents of CONSULT
Fail-safe
Cancellation
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст