Nissan Qashqai J11. Manual — part 1962
PCS-120
< SYMPTOM DIAGNOSIS >
[POWER DISTRIBUTION SYSTEM]
PUSH-BUTTON IGNITION SWITCH DOES NOT OPERATE
SYMPTOM DIAGNOSIS
PUSH-BUTTON IGNITION SWITCH DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000010434076
1.
PERFORM WORK SUPPORT
Perform “INSIDE ANT DIAGNOSIS” on Work Support of “INTELLIGENT KEY”.
Refer to
DLK-48, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY) (Type 1)"
>> GO TO 2.
2.
PERFORM SELF-DIAGNOSIS RESULT
Perform Self-Diagnosis Result of “BCM”.
Is DTC detected?
YES
>> Refer to
.
NO
>> GO TO 3.
3.
CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch.
Refer to
PCS-117, "Component Function Check"
.
Is the operation normal?
YES
>> GO TO 4.
NO
>> Repair or replace malfunctioning parts.
4.
REPLACE BCM
Replace BCM. Refer to
BCS-132, "Removal and Installation"
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-41, "Intermittent Incident"
.
PCS
ACCESSORY POWER SUPPLY IS NOT SUPPLIED EVEN IF DOOR IS UN-
LOCKED BY KEY
PCS-121
< SYMPTOM DIAGNOSIS >
[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ACCESSORY POWER SUPPLY IS NOT SUPPLIED EVEN IF DOOR IS UN-
LOCKED BY KEY
ALL SWITCHES AND UNITS
ALL SWITCHES AND UNITS : Diagnosis Procedure
INFOID:0000000010434077
1.
CHECK ACCESSORY RELAY
Check accessory relay
Refer to
PCS-114, "Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK BCM–AV CONTROL UNIT CIRCUIT
Check BCM–AV control unit circuit.
Refer to
PCS-116, "Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
REPLACE BCM
BCS-132, "Removal and Installation"
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-41, "Intermittent Incident"
.
EXCEPT AUDIO/NAVIGATION
EXCEPT AUDIO/NAVIGATION : Diagnosis Procedure
INFOID:0000000010519157
1.
CHECK ACCESSORY RELAY
Check accessory relay
Refer to
PCS-114, "Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
REPLACE BCM
BCS-132, "Removal and Installation"
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-41, "Intermittent Incident"
.
AUDIO/NAVIGATION ONLY
AUDIO/NAVIGATION ONLY : Diagnosis Procedure
INFOID:0000000010519158
1.
CHECK BCM–AV CONTROL UNIT CIRCUIT
Check BCM–AV control unit circuit.
Refer to
PCS-116, "Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
REPLACE BCM
PCS-122
< SYMPTOM DIAGNOSIS >
[POWER DISTRIBUTION SYSTEM]
ACCESSORY POWER SUPPLY IS NOT SUPPLIED EVEN IF DOOR IS UN-
LOCKED BY KEY
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
PCS
PUSH-BUTTON IGNITION SWITCH
PCS-123
< REMOVAL AND INSTALLATION >
[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
REMOVAL AND INSTALLATION
PUSH-BUTTON IGNITION SWITCH
Removal and Installation
INFOID:0000000010434078
REMOVAL
1.
Remove instrument finisher E. Refer to
IP-13, "Removal and Installation"
2.
Disconnect push-button ignition switch connector and NATS antenna amp. connector.
3.
Disengage NATS antenna amp. fixing pawls and then remove
NATS antenna amp. and push-button ignition switch
as a set
from instrument finisher E.
4.
Disengage push-button ignition switch fixing pawl and then
remove push-button ignition switch
from NATS antenna amp.
.
INSTALLATION
Install in the reverse order of removal.
: Pawl
JMMIA1607JP
: Pawl
JMMIA1435ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст