Nissan Qashqai J11. Manual — part 1945
PCS-52
< BASIC INSPECTION >
[IPDM E/R]
ADDITIONAL SERVICE WHEN REPLACING IPDM E/R
BASIC INSPECTION
ADDITIONAL SERVICE WHEN REPLACING IPDM E/R
Description
INFOID:0000000010499180
After replaced IPDM E/R, it is necessary to perform control unit configuration and height sensor initialize (For
LED headlamp models) with CONSULT.
BEFORE REPLACEMENT
When replacing IPDM E/R, save or print current vehicle specification with CONSULT configuration before
replacement.
NOTE:
If “Before Replace ECU” of “Read/Write Configuration” cannot be used, use the “Manual Configuration” after
replacing IPDM E/R.
AFTER REPLACEMENT
CAUTION:
• When replacing IPDM E/R, always perform “Read/Write Configuration” or “Manual Configuration”
with CONSULT. Or not doing so, IPDM E/R control function does not operate normally.
• Never perform “Read / Write Configuration” or “Manual Configuration” except for new IPDM E/R or
the control function may not operate normally.
Work Procedure
INFOID:0000000010499181
1.
SAVING VEHICLE SPECIFICATION (IPDM E/R)
CONSULT Configuration
Perform “Before Replace ECU” of “Read / Write Configuration” to save or print current vehicle specification.
Refer to
.
NOTE:
If “Before Replace ECU” of “Read/Write Configuration” cannot be used, use the “Manual Configuration” after
replacing IPDM E/R.
>> GO TO 2.
2.
REPLACE IPDM E/R
Replace IPDM E/R. Refer to
PCS-67, "Removal and Installation"
>> GO TO 3.
3.
WRITING VEHICLE SPECIFICATION (IPDM E/R)
CONSULT Configuration
Perform “After Replace ECU” of “Read/Write Configuration” or “Manual Configuration” to write vehicle specifi-
cation. Refer to
>> GO TO 4.
4.
CHECK HEADLAMP TYPE
Check headlamp type.
LED headlamp>>GO TO 5.
Halogen headlamp>>WORK END
5.
HEIGHT SENSOR INITIALIZE
Perform height sensor initialize. Refer to
.
>> WORK END
PCS
CONFIGURATION (IPDM E/R)
PCS-53
< BASIC INSPECTION >
[IPDM E/R]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
CONFIGURATION (IPDM E/R)
Description
INFOID:0000000010499182
There is no vehicle specification in new IPDM E/R, so the vehicle specification needs to be written in IPDM E/
R with CONSULT.
Configuration has three functions as follows.
CAUTION:
• When replacing IPDM E/R, always perform “Read/Write Configuration” or “Manual Configuration”
with CONSULT. Or not doing so, IPDM E/R control function does not operate normally.
• Never perform “Read / Write Configuration” or “Manual Configuration” except for new IPDM E/R or
the control function may not operate normally.
Work Procedure
INFOID:0000000010499183
1.
WRITING MODE SELECTION
CONSULT Configuration
Select “CONFIGURATION” of IPDM E/R.
When writing saved data>>GO TO 2.
When writing manually>>GO TO 3.
2.
PERFORM “WRITE CONFIGURATION”
CONSULT Configuration
1.
Select “READ/WRITE CONFIGURATION”.
2.
Select “After Replace ECU”.
>> GO TO 4.
3.
PERFORM “MANUAL CONFIGURATION”
CONSULT Configuration
1.
Select “MANUAL CONFIGURATION”.
2.
Identify the correct model and configuration list. Refer to
CAUTION:
• Thoroughly read and understand the vehicle specification. ECU control may not operate nor-
mally if the setting is not correct.
• Make sure to select “SETTING” even if the indicated configuration of brand new IPDM E/R is
same as the desirable configuration. If not, configuration which is set automatically by selecting
vehicle model cannot be memorized
3.
Sets the displayed item and then select “NEXT”.
NOTE:
If item is not displayed, select “NEXT”.
4.
Check that the configuration has been successfully written and touch “End”.
>> GO TO 4.
4.
OPERATION CHECK
Confirm that each function controlled by IPDM E/R operates normally.
>> WORK END
Function
Description
READ/WRITE CON-
FIGURATION
Before Replace ECU
• Reads the vehicle configuration of current BCM.
• Saves the read vehicle configuration.
After Replace ECU
Writes the vehicle configuration with saved data.
MANUAL CONFIGURATION
Writes the vehicle configuration with manual selection.
PCS-54
< BASIC INSPECTION >
[IPDM E/R]
CONFIGURATION (IPDM E/R)
Configuration List
INFOID:0000000010499184
CAUTION:
Check vehicle specifications before servicing.
MANUAL SETTING ITEM
NOTE
System
Item
Setting value
IPDM-E
Data part No
284B7-4EA8D
–
IPDM-E
Data part No
284B7-4EA8E
–
IPDM-E
Data part No
284B7-4EA9A
–
IPDM-E
Data part No
284B7-4EA9B
–
IPDM-E
Data part No
284B7-4EA9C
–
IPDM-E
Data part No
284B7-4EA9D
–
IPDM-E
Data part No
284B7-4EA9E
–
IPDM-E
Data part No
284B7-4EB0A
–
IPDM-E
Data part No
284B7-4EB0B
–
IPDM-E
Data part No
284B7-4EB0C
–
IPDM-E
Data part No
284B7-4EB0D
–
IPDM-E
Data part No
284B7-4EB0E
–
IPDM-E
Data part No
284B7-4EB1A
–
IPDM-E
Data part No
284B7-4EB1B
–
IPDM-E
Data part No
284B7-4EB1C
–
IPDM-E
Data part No
284B7-4EB1D
–
IPDM-E
Data part No
284B7-4EB1E
–
IPDM-E
Data part No
284B7-4EB2A
–
IPDM-E
Data part No
284B7-4EB2B
–
IPDM-E
Data part No
284B7-4EB2C
–
IPDM-E
Data part No
284B7-4EB2D
–
IPDM-E
Data part No
284B7-4EB2E
–
IPDM-E
Data part No
284B7-4EB3A
–
IPDM-E
Data part No
284B7-4EB3B
–
IPDM-E
Data part No
284B7-4EB3C
–
IPDM-E
Data part No
284B7-4EB3D
–
IPDM-E
Data part No
284B7-4EB3E
–
IPDM-E
Data part No
284B7-4EB4A
–
IPDM-E
Data part No
284B7-4EB4B
–
IPDM-E
Data part No
284B7-4EB4C
–
IPDM-E
Data part No
284B7-4EB4D
–
IPDM-E
Data part No
284B7-4EB4E
–
IPDM-E
Data part No
284B7-4EB5A
–
IPDM-E
Data part No
284B7-4EB5B
–
IPDM-E
Data part No
284B7-4EB5C
–
IPDM-E
Data part No
284B7-4EB5D
–
IPDM-E
Data part No
284B7-4EB5E
–
IPDM-E
Data part No
284B7-4EB6A
–
PCS
CONFIGURATION (IPDM E/R)
PCS-55
< BASIC INSPECTION >
[IPDM E/R]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
IPDM-E
Data part No
284B7-4EB8B
All of the following are satisfied.
• R9M engine
• MT
• Headlamp aiming control system (auto)
• LED headlamp
• With Intelligent Key system
• With stop/start system
IPDM-E
Data part No
284B7-4EB8C
All of the following are satisfied.
• R9M engine
• CVT
• Headlamp aiming control system (manual)
• Halogen headlamp
• Without Intelligent Key system
• With stop/start system
IPDM-E
Data part No
284B7-4EB8D
All of the following are satisfied.
• R9M engine
• CVT
• Headlamp aiming control system (auto)
• LED headlamp
• With Intelligent Key system
• With stop/start system
IPDM-E
Data part No
284B7-4EB9B
All of the following are satisfied.
• MR16DD engine
• MT
• Headlamp aiming control system (manual)
• Halogen headlamp
• Without Intelligent Key system
• With stop/start system
IPDM-E
Data part No
284B7-4EB9C
All of the following are satisfied.
• MR16DD engine
• MT
• Headlamp aiming control system (auto)
• LED headlamp
• With Intelligent Key system
• With stop/start system
IPDM-E
Data part No
284B7-4EB9D
All of the following are satisfied.
• HRA2DDT engine
• MT
• Headlamp aiming control system (manual)
• Halogen headlamp
• Without Intelligent Key system
• Without stop/start system
IPDM-E
Data part No
284B7-4EB9E
All of the following are satisfied.
• HRA2DDT engine
• CVT
• Headlamp aiming control system (manual)
• Halogen headlamp
• Without Intelligent Key system
• Without stop/start system
IPDM-E
Data part No
284B7-4ED0A
All of the following are satisfied.
• HRA2DDT engine
• CVT
• Headlamp aiming control system (auto)
• LED headlamp
• With Intelligent Key system
• Without stop/start system
MANUAL SETTING ITEM
NOTE
System
Item
Setting value
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст