Nissan Qashqai J11. Manual — part 1216
ANTI-HIJACK FUNCTION DOES NOT OPERATE
DLK-133
< SYMPTOM DIAGNOSIS >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
ANTI-HIJACK FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000010434660
1.
CHECK “DOOR LOCK–UNLOCK SET” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT.
2.
Select “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT” mode.
3.
Check “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”
Refer to
DLK-47, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK) (Type 1)"
Is the inspection result normal?
YES
>> GO TO 2
NO
>> Set “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”.
2.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-132, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-41, "Intermittent Incident"
.
DLK-134
< SYMPTOM DIAGNOSIS >
[TYPE 1]
AUTO DOOR LOCK OPERATION DOES NOT OPERATE
AUTO DOOR LOCK OPERATION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000010434661
1.
CHECK “AUTO LOCK SET” SETTING IN “WORK SUPPORT”
1.
Select “INTELLIGENT KEY” of “BCM” using CONSULT.
2.
Select “AUTO LOCK SET” in “WORK SUPPORT” mode.
3.
Check “AUTO LOCK SET” in “WORK SUPPORT”.
Refer to
DLK-48, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY) (Type 1)"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “AUTO LOCK SET” setting in “WORK SUPPORT”.
2.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-132, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-41, "Intermittent Incident"
.
HAZARD REMINDER OPERATION DOES NOT OPERATE
DLK-135
< SYMPTOM DIAGNOSIS >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
HAZARD REMINDER OPERATION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000010434662
1.
CHECK DTC WITH BCM AND COMBINATION METER
Check that DTC is not detected with BCM and combination meter.
Is the inspection result normal?
YES
>> GO TO 2.
NO-1
>> Refer to
NO-2
>> Refer to
. (Combination meter)
2.
CHECK HAZARD FUNCTION
Check hazard function.
Refer to
DLK-97, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-132, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-41, "Intermittent Incident"
.
DLK-136
< SYMPTOM DIAGNOSIS >
[TYPE 1]
HAZARD REMINDER OPERATION DOES NOT OPERATE
HAZARD REMINDER OPERATION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000010434662
1.
CHECK DTC WITH BCM AND COMBINATION METER
Check that DTC is not detected with BCM and combination meter.
Is the inspection result normal?
YES
>> GO TO 2.
NO-1
>> Refer to
NO-2
>> Refer to
. (Combination meter)
2.
CHECK HAZARD FUNCTION
Check hazard function.
Refer to
DLK-98, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-135, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст