Nissan Qashqai J11. Manual — part 1589
BRM-184
< REMOVAL AND INSTALLATION >
[FOR EUROPE (RHD)]
REPLACEMENT OPERATIONS
Outer Sill Reinforcement
INFOID:0000000010313674
Work after outer sill is removed.
Body sealing
Unit: mm (in)
: Vehicle front
: Drill
φ
6 mm (0.24 in) hole for the plug welding hole (ultra high strength steel).
: For spot welding of steel plate of tensile strength 980 MPa, observe the indicated welding conditions. Refer to
ing of Ultra High Strength Steel"
JSKIA4016GB
REPLACEMENT OPERATIONS
BRM-185
< REMOVAL AND INSTALLATION >
[FOR EUROPE (RHD)]
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
Urethane foam
: Vehicle front
: Drill
φ
7 mm (0.28 in) hole for the plug welding hole (ultra high strength steel).
: Drill
φ
8 mm (0.31 in) hole for the plug welding hole (ultra high strength steel).
: Drill
φ
9 mm (0.35 in) hole for the plug welding hole (ultra high strength steel).
: Weld the parts onto the back of the component part.
: For spot welding of steel plate of tensile strength 980 MPa, observe the indicated welding conditions. Refer to
ing of Ultra High Strength Steel"
Replacement part
z
Outer sill reinforcement assembly
JSKIA4017ZZ
BRM-186
< REMOVAL AND INSTALLATION >
[FOR EUROPE (RHD)]
REPLACEMENT OPERATIONS
Inner Sill
INFOID:0000000010313675
Work after outer sill and outer sill reinforcement are removed.
Cut the lower front pillar hinge brace (reusable) for easier installation.
Lower front pillar hinge brace (reus-
able)
Unit: mm (in)
: Vehicle front
: Drill
φ
8 mm (0.31 in) hole for the plug welding hole (ultra high strength steel).
Replacement part
z
Inner sill assembly
JSKIA4018GB
REPLACEMENT OPERATIONS
BRM-187
< REMOVAL AND INSTALLATION >
[FOR EUROPE (RHD)]
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
View G: Before installing lower front pillar hinge brace (reusable)
Unit: mm (in)
: Vehicle front
: Drill
φ
6 mm (0.24 in) hole for the plug welding hole (ultra high strength steel).
: Drill
φ
7 mm (0.28 in) hole for the plug welding hole (ultra high strength steel).
: Drill
φ
8 mm (0.31 in) hole for the plug welding hole (ultra high strength steel).
: Drill
φ
98 mm (0.35 in) hole for the plug welding hole (ultra high strength steel).
: Weld the parts onto the back of the component part.
: For spot welding of steel plate of tensile strength 980 MPa, observe the indicated welding conditions. Refer to
ing of Ultra High Strength Steel"
JSKIA4019GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст