Nissan Qashqai J11. Manual — part 1834
BCS-62
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM)
WORK SUPPORT
ACTIVE TEST
THEFT ALM : CONSULT Function (BCM - THEFT) (Without Intelligent Key System)
INFOID:0000000010505164
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
KEY CYL UN-SW
NOTE:
This item is indicated, but not monitored.
KEY CYL SW-TR
NOTE:
This item is indicated, but not monitored.
SEN CANCEL SW
Indicates [ON/OFF] condition of sensor cancel switch.
RKE-LOCK
Indicates [ON/OFF] condition of LOCK signal from Intelligent Key.
RKE-UNLOCK
Indicates [ON/OFF] condition of UNLOCK signal from Intelligent Key.
RKE-TR/BD
NOTE:
This item is indicated, but not monitored.
KEY SW
NOTE:
This item is indicated, but not monitored.
Monitored Item
Description
Service Item
Description
SECURITY ALARM SET
This mode is able to confirm and change vehicle security alarm ON-OFF setting.
SIREN SET
Select the siren function ON or OFF, and siren type.
• MODE 1: Without siren
• MODE 2: With siren
• MODE 3: With external complete protection (with siren)
• MODE 4: Without any external protection (with siren)
• MODE 5: Without external tilt protection (with siren)
THEFT ALM TRG
The switch which triggered vehicle security alarm is recorded.
This mode is able to confirm and erase the record of vehicle security alarm.
The trigger data can be erased by touching “CLEAR” on CONSULT screen.
Test Item
Description
SIREN
Activates the self-diagnosis function for siren control unit.
VEHICLE SECURITY HORN
NOTE:
This item is indicated, but not used
HEAD LAMP
NOTE:
This item is indicated, but not used
Monitored Item
Description
REQ SW -DR
Indicates [ON/OFF] condition of door request switch (driver side).
REQ SW -AS
Indicates [ON/OFF] condition of door request switch (passenger side).
REQ SW -BD/TR
Indicates [ON/OFF] condition of back door opener request switch.
PUSH SW
Indicates [ON/OFF] condition of push-button ignition switch
DOOR SW-DR
Indicates [ON/OFF] condition of front door switch (driver side).
DOOR SW-AS
Indicates [ON/OFF] condition of front door switch (passenger side).
DOOR SW-RR
Indicates [ON/OFF] condition of rear door switch RH.
DOOR SW-RL
Indicates [ON/OFF] condition of rear door switch LH.
DOOR SW-BK
Indicates [ON/OFF] condition of back door switch.
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-63
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
WORK SUPPORT
ACTIVE TEST
SIGNAL BUFFER
SIGNAL BUFFER : CONSULT Function (BCM - SIGNAL BUFFER)
INFOID:0000000010378015
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
CDL LOCK SW
Indicates [ON/OFF] condition of lock signal from door lock/unlock switch.
CDL UNLOCK SW
Indicates [ON/OFF] condition of unlock signal from door lock/unlock switch.
KEY CYL LK-SW
NOTE:
This item is indicated, but not monitored.
KEY CYL UN-SW
NOTE:
This item is indicated, but not monitored.
KEY CYL SW-TR
NOTE:
This item is indicated, but not monitored.
SEN CANCEL SW
Indicates [ON/OFF] condition of sensor cancel switch.
RKE-LOCK
Indicates [ON/OFF] condition of LOCK signal from Intelligent Key.
RKE-UNLOCK
Indicates [ON/OFF] condition of UNLOCK signal from Intelligent Key.
RKE-TR/BD
NOTE:
This item is indicated, but not monitored.
KEY SW
NOTE:
This item is indicated, but not monitored.
Monitored Item
Description
Service Item
Description
SECURITY ALARM SET
This mode is able to confirm and change vehicle security alarm ON-OFF setting.
SIREN SET
Select the siren function ON or OFF, and siren type.
• MODE 1: Without siren
• MODE 2: With siren
• MODE 3: With external complete protection (with siren)
• MODE 4: Without any external protection (with siren)
• MODE 5: Without external tilt protection (with siren)
THEFT ALM TRG
The switch which triggered vehicle security alarm is recorded.
This mode is able to confirm and erase the record of vehicle security alarm.
The trigger data can be erased by touching “CLEAR” on CONSULT screen.
Test Item
Description
SIREN
Activates the self-diagnosis function for siren control unit.
VEHICLE SECURITY HORN
NOTE:
This item is indicated, but not used
HEAD LAMP
NOTE:
This item is indicated, but not used
Monitor item [UNIT]
Description
PUSH SW
[Off/On]
Displays the status of the push-button ignition switch (push switch) judged by BCM.
BCS-64
< ECU DIAGNOSIS INFORMATION >
BCM
ECU DIAGNOSIS INFORMATION
BCM
Reference Value
INFOID:0000000010378017
VALUES ON THE DIAGNOSIS TOOL
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
CONSULT MONITOR ITEM
Monitor Item
Condition
Value/Status
CONFRM ID ALL
The Intelligent Key ID that the NATS antenna amp. receives is not recog-
nized by any Intelligent Key ID registered to BCM.
Yet
The Intelligent Key ID that the NATS antenna amp. receives is recognized
by any Intelligent Key ID registered to BCM.
Done
CONFIRM ID4
The Intelligent Key ID that the NATS antenna amp. receives is not recog-
nized by the fourth Intelligent Key ID registered to BCM.
Yet
The Intelligent Key ID that the NATS antenna amp. receives is recognized
by the fourth Intelligent Key ID registered to BCM.
Done
CONFIRM ID3
The Intelligent Key ID that the NATS antenna amp. receives is not recog-
nized by the third Intelligent Key ID registered to BCM.
Yet
The Intelligent Key ID that the NATS antenna amp. receives is recognized
by the third Intelligent Key ID registered to BCM.
Done
CONFIRM ID2
The Intelligent Key ID that the NATS antenna amp. receives is not recog-
nized by the second Intelligent Key ID registered to BCM.
Yet
The Intelligent Key ID that the NATS antenna amp. receives is recognized
by the second Intelligent Key ID registered to BCM.
Done
CONFIRM ID1
The Intelligent Key ID that the NATS antenna amp. receives is not recog-
nized by the first Intelligent Key ID registered to BCM.
Yet
The Intelligent Key ID that the NATS antenna amp. receives is recognized
by the first Intelligent Key ID registered to BCM.
Done
NOT REGISTERED
BCM detects registered Intelligent Key ID, or BCM does not detect Intelli-
gent Key ID.
ID OK
BCM detects non-registration Intelligent Key ID.
ID NG
TP 4
The ID of fourth Intelligent Key is not registered to BCM
Yet
The ID of fourth Intelligent Key is registered to BCM
Done
TP 3
The ID of third Intelligent Key is not registered to BCM
Yet
The ID of third Intelligent Key is registered to BCM
Done
TP 2
The ID of second Intelligent Key is not registered to BCM
Yet
The ID of second Intelligent Key is registered to BCM
Done
TP 1
The ID of first Intelligent Key is not registered to BCM
Yet
The ID of first Intelligent Key is registered to BCM
Done
REQ SW -DR
Driver door request switch is not pressed
Off
Driver door request switch is pressed
On
REQ SW -AS
Passenger door request switch is not pressed
Off
Passenger door request switch is pressed
On
REQ SW -BD/TR
Trunk lid opener request switch is not pressed
Off
Trunk lid opener request switch is pressed
On
PUSH SW
Push-button ignition switch (push switch) is not pressed
Off
Push-button ignition switch (push switch) is pressed
On
BCS
BCM
BCS-65
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
STARTER CUT RELAY
Other than engine cranking
Off
At engine cranking
On
DETECTION SENSOR (BK)
NOTE:
The item is indicated, but not monitored.
Off
CLUCH SW
The clutch pedal is not depressed.
Off
The clutch pedal is depressed
On
BRAKE SW 1
• The brake pedal is not depressed and ignition switch ON (MR engine
with M/T models)
• The brake pedal is depressed and ignition switch ON (Except MR en-
gine with M/T models)
Off
• The brake pedal is depressed and ignition switch ON (MR engine with
M/T models)
• The brake pedal is not depressed and ignition switch ON (Except MR
engine with M/T models)
On
BRAKE SW 2
The brake pedal is not depressed
Off
The brake pedal is depressed
On
DETE/CANCL SW
Selector lever in P position
Off
Selector lever in any position other than P
On
START CLUTCH SW
The clutch pedal is depressed
Off
The clutch pedal is not depressed
On
PUSH SW -IPDM
Push-button ignition switch (push-switch) is not pressed
Off
Push-button ignition switch (push-switch) is pressed
On
IGN RLY1 -F/B
Power position in OFF or ACC
Off
Power position in ON
On
NEUTRAL SW - IPDM
• Selector lever in any position other than P and N (CVT models)
• Control lever in any position other than neutral (M/T models)
Off
• Selector lever in P or N position (CVT models)
• Control lever in neutral position (M/T models)
On
SFT PN -IPDM
Selector lever in any position other than P or N
Off
Selector lever in P or N position
On
STARTER RELAY - IPDM
Other than engine cranking
Off
At engine cranking (short cranking)
Crank
Operation prohibited status
Invalid
At engine cranking
On
ENGINE STATE
Engine stopped
STOP
While the engine stalls
STALL
At engine cranking
CRANK
Engine running
RUN
ST/INHI RELAY - IPDM
Power position in OFF
Off, Off
Engine restart
Off, On
At engine cranking
INVALID
Engine running
On, On
REVERSE SIGNAL - IPDM
Selector lever in any position other than R position
Off
Selector lever in R position
On
Monitor Item
Condition
Value/Status
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст