Nissan Qashqai J11. Manual — part 911
PB-26
< ECU DIAGNOSIS INFORMATION >
ELECTRIC PARKING BRAKE CONTROL MODULE
*: Refer to
WCS-7, "WARNING CHIME SYSTEM : System Description"
for ON/OFF/BRINK conditions of each
warning lamp and each indicator lamp, buzzer and information display in the combination meter.
TERMINAL LAYOUT
PHYSICAL VALUE
PB WARNING 3
*
No warning
NO
When the parking brake switch is continued to be
pulled while the vehicle is travelling. (Displays the
“Release parking brake” by information display in the
combination meter, master warning lamp turns ON
and buzzer is operate)
WARN
PB WARNING 4
*
No warning
NO
When the electric parking brake system cannot be
cancelled automatically after trying this without fas-
tening the seat belt. (Displays the “Release parking
brake” by information display in the combination
meter)
WARN 1
When the electric parking brake system cannot be
cancelled automatically after trying this again with-
out fastening the seat belt. (Displays the “Release
parking brake” by information display in the combi-
nation meter)
WARN 2
PB WARNING 5
*
No warning
NO
When driving the vehicle without releasing the park-
ing brake. (Displays the “Release parking brake” by
information display in the combination meter, master
warning lamp turns ON and buzzer is operate)
WARN
PB SW INDICATOR
*
Parking switch indicator lamp is OFF
Off
Parking switch indicator lamp is ON
On
Parking switch indicator lamp is blinking
BLINK
Monitor item
Condition
Reference values in normal operation
JSFIA2475ZZ
Terminal No.
Description
Condition
Value
(Approx.)
+
–
Signal name
Input/
Output
8
(SB)
Ground
Parking brake switch indicator lamp
Output
Igni-
tion
switch
ON
Parking brake switch is pulling
0 V
Parking brake switch is neutral
0 V
Parking brake switch is pushing
9
−
16 V
9
(BR)
Ground
Parking brake switch release (NOR-
OP)
Input
Igni-
tion
switch
ON
Parking brake switch is pulling
0.8
−
3.7 V
Parking brake switch is neutral
0.8
−
3.7 V
Parking brake switch is pushing
9
−
16 V
ELECTRIC PARKING BRAKE CONTROL MODULE
PB-27
< ECU DIAGNOSIS INFORMATION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
*: Refer to
WCS-7, "WARNING CHIME SYSTEM : System Description"
for ON/OFF/BRINK conditions of each
warning lamp and each indicator lamp, buzzer and information display in the combination meter.
TERMINAL LAYOUT
PHYSICAL VALUE
PB WARNING 3
*
No warning
NO
When the parking brake switch is continued to be
pulled while the vehicle is travelling. (Displays the
“Release parking brake” by information display in the
combination meter, master warning lamp turns ON
and buzzer is operate)
WARN
PB WARNING 4
*
No warning
NO
When the electric parking brake system cannot be
cancelled automatically after trying this without fas-
tening the seat belt. (Displays the “Release parking
brake” by information display in the combination
meter)
WARN 1
When the electric parking brake system cannot be
cancelled automatically after trying this again with-
out fastening the seat belt. (Displays the “Release
parking brake” by information display in the combi-
nation meter)
WARN 2
PB WARNING 5
*
No warning
NO
When driving the vehicle without releasing the park-
ing brake. (Displays the “Release parking brake” by
information display in the combination meter, master
warning lamp turns ON and buzzer is operate)
WARN
PB SW INDICATOR
*
Parking switch indicator lamp is OFF
Off
Parking switch indicator lamp is ON
On
Parking switch indicator lamp is blinking
BLINK
Monitor item
Condition
Reference values in normal operation
JSFIA2475ZZ
Terminal No.
Description
Condition
Value
(Approx.)
+
–
Signal name
Input/
Output
8
(SB)
Ground
Parking brake switch indicator lamp
Output
Igni-
tion
switch
ON
Parking brake switch is pulling
0 V
Parking brake switch is neutral
0 V
Parking brake switch is pushing
9
−
16 V
9
(BR)
Ground
Parking brake switch release (NOR-
OP)
Input
Igni-
tion
switch
ON
Parking brake switch is pulling
0.8
−
3.7 V
Parking brake switch is neutral
0.8
−
3.7 V
Parking brake switch is pushing
9
−
16 V
PB-28
< ECU DIAGNOSIS INFORMATION >
ELECTRIC PARKING BRAKE CONTROL MODULE
Fail-Safe
INFOID:0000000010836598
• The brake system warning lamp (yellow) and/or electric parking indicator lamp turns ON when a malfunction
with the system occurs.
• When parking brake switch is pulled/pushed during system malfunction, electric parking brake indicator
lamp blinks and master warning lamp (red) turns ON when electric parking brake cannot be operated. It
restricts braking and release operations of electric parking brake.
NOTE:
The parking brake can be mechanically released.
29
(BR)
Ground
Motor LH (
−
)
Input/
Output
Igni-
tion
switch
ON
Motor is active (apply)
0 V
Motor is active (release)
9
−
16 V
30
(B)
Ground
Ground (Motor LH)
—
Igni-
tion
switch
ON
—
0 V
Terminal No.
Description
Condition
Value
(Approx.)
+
–
Signal name
Input/
Output
DTC
Display item
Vehicle condition
C10C8
CONTROL MODULE
[INTERNAL ELEC-
TRIC MALFUNCTION]
Only mechanical release is available.
[WATCHDOG/SAFET-
Y
µ
C ERROR]
[SUPERVISION
SOFTWARE ERROR]
[EVENT INFORMA-
TION]
[NOT CONFIGURED]
Automatic apply and release are prohibited.
C10E3
PARKING BRAKE SWITCH
• Applying the parking brake is prohibited.
• Release using the parking brake switch is prohibited. (It can be re-
leased automatically.)
• Automatic apply is available.
C10E6
IGNITION SWITCH
Normal control
C1BD0
MOTOR
One side motor is available.
C1BD1
PARKING BRAKE SW
• Apply and release by switch are prohibited.
• Automatic apply and release are available.
C1BD2
PARKING BRAKE SW
C1BD3
PARKING BRAKE SW
C1BD4
G SENSOR
Automatic release is prohibited.
C1BD5
POWER SUPPLY VOLT
Only mechanical release is available.
C1BD6
DOOR SW
Normal control
C1BD7
CLUTCH SENSOR
[WRONG MOUNTING]
Automatic apply and release are prohibited. (Manual release can be per-
formed.)
C1BD9
INITIALIZE POSITION
Automatic apply and release are prohibited.
ELECTRIC PARKING BRAKE CONTROL MODULE
PB-29
< ECU DIAGNOSIS INFORMATION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
Fail-Safe
INFOID:0000000010836598
• The brake system warning lamp (yellow) and/or electric parking indicator lamp turns ON when a malfunction
with the system occurs.
• When parking brake switch is pulled/pushed during system malfunction, electric parking brake indicator
lamp blinks and master warning lamp (red) turns ON when electric parking brake cannot be operated. It
restricts braking and release operations of electric parking brake.
NOTE:
The parking brake can be mechanically released.
29
(BR)
Ground
Motor LH (
−
)
Input/
Output
Igni-
tion
switch
ON
Motor is active (apply)
0 V
Motor is active (release)
9
−
16 V
30
(B)
Ground
Ground (Motor LH)
—
Igni-
tion
switch
ON
—
0 V
Terminal No.
Description
Condition
Value
(Approx.)
+
–
Signal name
Input/
Output
DTC
Display item
Vehicle condition
C10C8
CONTROL MODULE
[INTERNAL ELEC-
TRIC MALFUNCTION]
Only mechanical release is available.
[WATCHDOG/SAFET-
Y
µ
C ERROR]
[SUPERVISION
SOFTWARE ERROR]
[EVENT INFORMA-
TION]
[NOT CONFIGURED]
Automatic apply and release are prohibited.
C10E3
PARKING BRAKE SWITCH
• Applying the parking brake is prohibited.
• Release using the parking brake switch is prohibited. (It can be re-
leased automatically.)
• Automatic apply is available.
C10E6
IGNITION SWITCH
Normal control
C1BD0
MOTOR
One side motor is available.
C1BD1
PARKING BRAKE SW
• Apply and release by switch are prohibited.
• Automatic apply and release are available.
C1BD2
PARKING BRAKE SW
C1BD3
PARKING BRAKE SW
C1BD4
G SENSOR
Automatic release is prohibited.
C1BD5
POWER SUPPLY VOLT
Only mechanical release is available.
C1BD6
DOOR SW
Normal control
C1BD7
CLUTCH SENSOR
[WRONG MOUNTING]
Automatic apply and release are prohibited. (Manual release can be per-
formed.)
C1BD9
INITIALIZE POSITION
Automatic apply and release are prohibited.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст