Nissan Qashqai J11. Manual — part 2091
AV
AUDIO UNIT
AV-53
< REMOVAL AND INSTALLATION >
[AUDIO SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
REMOVAL AND INSTALLATION
AUDIO UNIT
Exploded View
INFOID:0000000010502045
NOTE:
The following figures show the image of the inspection procedure. (Existing parts are not the same shape as
the parts in the figure.)
Removal and Installation
INFOID:0000000010502046
REMOVAL
1.
Disconnect the negative battery terminal. Refer to
2.
Remove A/C switch (AUTOMATIC AIR CONDITIONING) or front air control (MANUAL AIR CONDITION-
ING).
3.
Remove instrument finisher B. Refer to
4.
Remove instrument finisher E. Refer to
5.
Remove the audio unit screws, then pull out the audio unit.
6.
Disconnect the harness connectors from the audio unit and remove.
7.
Remove the audio unit bracket (LH/RH) screws and the audio unit brackets (LH/RH) (if necessary).
INSTALLATION
Installation is in the reverse order of removal.
1.
Audio unit bracket (LH)
2.
Audio unit
3.
Audio unit bracket (RH)
AWNIA3340ZZ
AV-54
< REMOVAL AND INSTALLATION >
[AUDIO SYSTEM]
STEERING SWITCHES
STEERING SWITCHES
Exploded View
INFOID:0000000010502047
Removal and Installation
INFOID:0000000010502048
REMOVAL
NOTE:
The steering switches are serviced as an assembly.
1.
Remove steering wheel. Refer to
2.
Release pawls on the steering wheel rear finisher and remove.
3.
Remove screws (A) and steering switches (1) from steering
wheel (2).
INSTALLATION
Installation is in the reverse order of removal.
1.
Steering wheel rear finisher
2.
Steering wheel
3.
Steering switches
Pawl
AWNIA3342ZZ
AWNIA3326ZZ
AV
FRONT TWEETER
AV-55
< REMOVAL AND INSTALLATION >
[AUDIO SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
FRONT TWEETER
Removal and Installation
INFOID:0000000010502049
REMOVAL
1.
Remove defroster grille. Refer to
.
2.
Remove bolts and pull out the front tweeter.
3.
Disconnect the harness connector from the front tweeter and remove.
INSTALLATION
Installation is in the reverse order of removal.
AV-56
< REMOVAL AND INSTALLATION >
[AUDIO SYSTEM]
FRONT DOOR SPEAKER
FRONT DOOR SPEAKER
Exploded View
INFOID:0000000010502050
Removal and Installation
INFOID:0000000010502051
REMOVAL
1.
Remove front door finisher. Refer to
INT-12, "FRONT DOOR FINISHER : Exploded View"
2.
Remove front door speaker bolts, then pull out front door speaker.
3.
Disconnect the harness connector from front door speaker and remove.
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1580ZZ
1.
Front door speaker
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст