Nissan Qashqai J11. Manual — part 1125
HAC-136
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
POWER TRANSISTOR
POWER TRANSISTOR
Exploded View
INFOID:0000000010432259
.
Removal and Installation
INFOID:0000000010432260
REMOVAL
1.
Disconnect power transistor harness connector.
2.
Remove fixing screw
and disengage pawl.
3.
Remove power transistor from A/C unit assembly.
INSTALLATION
Install in the reverse order of removal.
: Pawl
JMIIA3399ZZ
DOOR MOTOR
HAC-137
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
DOOR MOTOR
Exploded View
INFOID:0000000010432261
LEFT SIDE
RIGHT SIDE
A/C unit assembly
Intake door lever
Intake door link
Intake door motor
Air mix door motor LH
JMIIA3368GB
HAC-138
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
DOOR MOTOR
AIR MIX DOOR MOTOR
AIR MIX DOOR MOTOR : Removal and Installation
INFOID:0000000010432262
REMOVAL
Air Mix Door Motor RH
1.
Set the temperature at 32
°
C (90
°
F).
CAUTION:
Always perform the above procedure when removing air mix door motor. Otherwise, air mix door
may interfere in A/C unit assembly may be damaged.
2.
Remove instrument lower panel RH (RHD models) or glove box cover (LHD models). Refer to
3.
Remove foot duct RH. Refer to
VTL-14, "FOOT DUCT : Removal and Installation"
4.
Disconnect air mix door motor harness connector.
A/C unit assembly
Side ventilator door lever
Foot door link
Foot door link
Main link
Air mix door lever
Air mix door rod
Air mix door motor lever
Air mix door motor RH
Mode door link
Mode door motor
Mode door lever
: Indicates that the part is connected at pints with same symbol in actual vehicle.
JMIIA3367GB
DOOR MOTOR
HAC-139
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
5.
Remove fixing screws
, and then remove air mix door motor
RH.
Air Mix Door Motor LH
1.
Set the temperature at 18
°
C (64
°
F).
CAUTION:
Always perform the above procedure when removing air mix door motor. Otherwise, air mix door
may interfere in A/C unit assembly may be damaged.
2.
Remove instrument lower panel LH (LHD models) or glove box cover (RHD models). Refer to
3.
Remove front foot duct LH. Refer to
VTL-14, "FOOT DUCT : Removal and Installation"
4.
Disconnect air mix door motor harness connector.
5.
Remove fixing screws
, and then remove air mix door motor
LH.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installing door motor, perform door motor starting position. Refer to
INTAKE DOOR MOTOR
INTAKE DOOR MOTOR : Removal and Installation
INFOID:0000000010432263
REMOVAL
1.
Remove instrument lower panel LH (LHD models) or glove box cover (RHD models). Refer to
2.
Disconnect intake door motor harness connector.
3.
Remove fixing screws
, and then remove intake door motor.
JMIIA3397ZZ
JMIIA3395ZZ
JMIIA3394ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст