Nissan Qashqai J11. Manual — part 1577
BRM-136
< PREPARATION >
[FOR EUROPE (RHD)]
BODY COMPONENT PARTS
CAUTION:
If the high strength steel (ultra high strength steel) of this is broken, replace by assembly for the supply part.
NOTE:
• For the parts without a number described in the figure, it is supplied only with the assembly part that the part is included with.
• Tensile strength column shows the largest strength value of a part in the component part.
2WD : Body Component Parts
INFOID:0000000010498724
Refer to parts catalogue for the replacement parts.
rear spring mounting bracket assembly (RH & LH)
Under 440
×
Rear side member extension assembly (RH & LH)
780
×
No.
Parts name
Tensile strength
(MPa)
Both sided
anti-corrosive
precoated
steel sections
BODY COMPONENT PARTS
BRM-137
< PREPARATION >
[FOR EUROPE (RHD)]
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
Without sunroof models
With sunroof models
Right side
: Both sided anti-corrosive precoated steel sections
: High strength steel (HSS) sections
: Both sided anti-corrosive steel and HSS sections
JSKIA3884ZZ
BRM-138
< PREPARATION >
[FOR EUROPE (RHD)]
BODY COMPONENT PARTS
No.
Parts name
Tensile strength
(MPa)
Both sided
anti-corrosive
precoated
steel sections
Roof
Under 440
—
Front roof rail assembly
Under 440
—
1st roof bow
Under 440
—
2nd roof bow
Under 440
—
3rd roof bow
Under 440
—
4th roof bow
Under 440
—
Rear roof rail assembly
Under 440
—
Sunroof assembly
Under 440
—
Upper front roof rail
Under 440
—
Roof extension assembly
Under 440
—
Center roof bow
Under 440
—
Hood assembly
Under 440
×
Front fender assembly (RH & LH)
Under 440
×
Inner front side roof rail assembly (RH & LH)
450
—
Upper inner front pillar assembly (RH & LH)
590
—
Inner center pillar assembly (RH & LH)
d.
980MPa
caution
T=1.2 mm (0.047 in)
590
×
Outer side roof rail (RH & LH)
980MPa
caution
T=1.0 mm (0.039 in)
—
×
Outer front side body (RH & LH)
Under 440
×
Center pillar hinge brace assembly (RH &
LH)
e.
980MPa
caution
T=1.2 mm (0.047 in)
Under 440
×
Front pillar hinge brace assembly (RH &
LH)
f.
980MPa
caution
T=1.4 mm (0.055 in)
590
×
Lower front pillar hinge brace (RH & LH)
590
×
Front fender bracket (RH & LH)
Under 440
×
Outer sill reinforcement assembly (RH &
LH)
g.
980MPa
caution
T=1.0 mm (0.039 in)
Under 440
×
Lower front pillar reinforcement (RH & LH)
Under 440
×
Outer sill assembly (RH & LH)
Under 440
×
Rear fender assembly (RH & LH)
Under 440
×
Rear fender extension complete (RH & LH)
Under 440
—
Striker retainer assembly (RH & LH)
Under 440
—
Upper rear panel assembly
450
×
Upper rear bumper retainer
Under 440
×
Rear bumper stay assembly (RH & LH)
600
—
Rear bumper reinforcement assembly
1180MPa
caution
T=1.2 mm (0.047 in)
—
—
Back door assembly
Under 440
×
BODY COMPONENT PARTS
BRM-139
< PREPARATION >
[FOR EUROPE (RHD)]
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
CAUTION:
If the high strength steel (ultra high strength steel) of this is broken, replace by assembly for the supply part.
NOTE:
• For the parts without a number described in the figure, it is supplied only with the assembly part that the part is included with.
• Tensile strength column shows the largest strength value of a part in the component part.
4WD
4WD : Ultra High Strength Steel Part
INFOID:0000000010505555
DESCRIPTION
Ultra high strength steel parts signify high strength steel plates with tensile strength of 980 MPa or more.
When replacing parts made of ultra high strength steel or parts including ultra high strength steel, never per-
form the prohibition described below:
PROHIBITION
WARNING:
Never cut ultra high strength steel parts or perform butt welding. Violation of this prohibition causes
extreme strength degradation, and the strength before damage cannot be secured.
PART REPLACEMENT
To replace an ultra high strength part, be sure to replace it by panel supply unit of ultra high strength steel part.
For the welding method, refer to
BRM-166, "Welding of Ultra High Strength Steel"
4WD : Underbody Component Parts
INFOID:0000000010498725
Refer to parts catalogue for the replacement parts.
Fuel filler base assembly
Under 440
—
Fuel filler lid assembly
Under 440
×
Inner rear pillar assembly (RH & LH)
Under 440
—
Inner rear pillar reinforcement (RH & LH)
Under 440
—
Lower inner rear pillar (RH & LH)
Under 440
—
Inner rear wheelhouse assembly (RH & LH)
Under 440
×
Outer rear wheelhouse assembly (RH & LH)
Under 440
×
Outer rear wheelhouse extension (RH & LH)
Under 440
×
Front door assembly (RH & LH)
Under 440
×
Outer front door (RH & LH)
Under 440
×
Rear door assembly (RH & LH)
Under 440
×
Outer rear door (RH & LH)
Under 440
×
No.
Parts name
Tensile strength
(MPa)
Both sided
anti-corrosive
precoated
steel sections
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст