Nissan Qashqai J11. Manual — part 437
ECK-308
< DTC/CIRCUIT DIAGNOSIS >
[K9K]
P1485 LOW PRESSURE EGR VOLUME CONTROL VALVE
P1485 LOW PRESSURE EGR VOLUME CONTROL VALVE
DTC Logic
INFOID:0000000010289937
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
PRECONDITIONING
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 1 minute before conducting the next test.
>> GO TO 2.
2.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Turn ignition switch ON and wait at least 1 second.
2.
Check DTC.
Is DTC detected?
YES
>> Proceed to
ECK-308, "Diagnosis Procedure"
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000010508573
1.
CHECK LOW PRESSURE EGR VOLUME CONTROL VALVE
Visually check low pressure EGR volume control valve for chipping.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace error-detected parts.
2.
CHECK DIESEL PARTICULATE FILTER
ECK-359, "Component Inspection"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace diesel particulate filter.
3.
CHECK ECM HARNESS CONNECTOR CONNECTIONS
Check ECM harness connector connection.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace error-detected parts.
4.
CHECK LOW PRESSURE EGR VOLUME CONTROL VALVE HARNESS CONNECTOR CONNECTIONS
Check low pressure EGR volume control valve harness connector connection.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace error-detected parts.
5.
CHECK LOW PRESSURE EGR VOLUME CONTROL VALVE CIRCUIT FOR OPEN AND SHORT
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
Possible cause
P1485
LOW PRESSURE EGR
VALVE COMMAND CIRCUIT
(Low pressure EGR valve
command circuit)
• 1.DEF: —
• 2.DEF: OPERATION TEM-
PERATURE TOO HIGH
• ECM detects low pressure EGR volume control
valve circuit is short circuit to ground.
• ECM detects low pressure EGR volume control
valve circuit is short circuit to battery.
• Low pressure EGR volume control valve circuit
temperature is too high.
• Harness or connectors
(Low pressure EGR volume control
valve circuit is shorted.)
• Low pressure EGR volume control
valve
P1485 LOW PRESSURE EGR VOLUME CONTROL VALVE
ECK-309
< DTC/CIRCUIT DIAGNOSIS >
[K9K]
C
D
E
F
G
H
I
J
K
L
M
A
ECK
N
P
O
1.
Turn ignition switch OFF.
2.
Check low pressure EGR volume control valve circuit for open and short.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace error-detected parts.
6.
DTC CONFIRMATION PROCEDURE
1.
Erase DTC.
2.
Perform DTC confirmation procedure again. Refer to
Is the DTC P1485 displayed again?
YES
>> GO TO 7.
NO
>> Check intermittent incident. Refer to
GI-41, "Intermittent Incident"
.
7.
CHECK LOW PRESSURE EGR VOLUME CONTROL VALVE MOTOR
ECK-315, "Component Inspection (Low Pressure EGR Volume Control Valve Motor)"
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-41, "Intermittent Incident"
.
NO
>> Replace error-detected parts.
Component Inspection (Low Pressure EGR Volume Control Valve Motor)
INFOID:0000000010508574
1.
CHECK LOW PRESSURE EGR VOLUME CONTROL VALVE MOTOR
1.
Turn ignition switch OFF.
2.
Disconnect low pressure EGR volume control valve harness connector.
3.
Check resistance between low pressure EGR volume control valve terminals as follows.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace low pressure EGR volume control valve.
+
-
Continuity
ECM
Low pressure EGR volume
control valve
Connector
Terminal
Connector
Terminal
F80
65
F34
1
Existed
66
2
79
3
F81
151
6
152
5
Low pressure EGR volume control valve
Condition
Resistance
+
-
Terminal
5
6
Temperature
°
C (
°
F)
20 (68)
1.69
Ω
ECK-310
< DTC/CIRCUIT DIAGNOSIS >
[K9K]
P1486 LOW PRESSURE EGR VOLUME CONTROL VALVE POSITION SENSOR
P1486 LOW PRESSURE EGR VOLUME CONTROL VALVE POSITION
SENSOR
DTC Logic
INFOID:0000000010289940
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
PRECONDITIONING
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 1 minute before conducting the next test.
>> GO TO 2.
2.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Turn ignition switch ON and wait at least 1 second.
2.
Check DTC.
Is DTC detected?
YES
>> Proceed to
ECK-310, "Diagnosis Procedure"
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000010508575
1.
CHECK LOW PRESSURE EGR VOLUME CONTROL VALVE
Visually check low pressure EGR volume control valve for chipping.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace error-detected parts.
2.
CHECK DIESEL PARTICULATE FILTER
ECK-359, "Component Inspection"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace diesel particulate filter.
3.
CHECK ECM HARNESS CONNECTOR CONNECTIONS
Check ECM harness connector connection.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace error-detected parts.
4.
CHECK LOW PRESSURE EGR VOLUME CONTROL VALVE HARNESS CONNECTOR CONNECTIONS
Check low pressure EGR volume control valve harness connector connection.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace error-detected parts.
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
Possible cause
P1486
LOW PRES EGR VALVE PO-
SITION SENSOR
(Low pressure EGR valve po-
sition sensor)
• 1.DEF:SIGNAL INCOHER-
ENCE
• An excessively high voltage (more than 4.7
V) from low pressure EGR volume control
valve position sensor is sent to ECM.
• An excessively low voltage (less than 0.3 V)
from low pressure EGR volume control
valve position sensor is sent to ECM.
• Harness or connectors
(Low pressure EGR volume control
valve position sensor circuit is open or
shorted.)
• Low pressure EGR volume control
valve position sensor
P1486 LOW PRESSURE EGR VOLUME CONTROL VALVE POSITION SENSOR
ECK-311
< DTC/CIRCUIT DIAGNOSIS >
[K9K]
C
D
E
F
G
H
I
J
K
L
M
A
ECK
N
P
O
5.
CHECK LOW PRESSURE EGR VOLUME CONTROL VALVE CIRCUIT FOR OPEN AND SHORT
1.
Turn ignition switch OFF.
2.
Check low pressure EGR volume control valve circuit for open and short.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace error-detected parts.
6.
DTC CONFIRMATION PROCEDURE
1.
Erase DTC.
2.
Perform DTC confirmation procedure again. Refer to
Is the DTC P1486 displayed again?
YES
>> GO TO 7.
NO
>> Check intermittent incident. Refer to
GI-41, "Intermittent Incident"
.
7.
CHECK LOW PRESSURE EGR VOLUME CONTROL VALVE MOTOR
ECK-315, "Component Inspection (Low Pressure EGR Volume Control Valve Motor)"
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-41, "Intermittent Incident"
.
NO
>> Replace error-detected parts.
Component Inspection (Low Pressure EGR Volume Control Valve Motor)
INFOID:0000000010508576
1.
CHECK LOW PRESSURE EGR VOLUME CONTROL VALVE MOTOR
1.
Turn ignition switch OFF.
2.
Disconnect low pressure EGR volume control valve harness connector.
3.
Check resistance between low pressure EGR volume control valve terminals as follows.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace low pressure EGR volume control valve.
+
-
Continuity
ECM
Low pressure EGR volume
control valve
Connector
Terminal
Connector
Terminal
F80
65
F34
1
Existed
66
2
79
3
F81
151
6
152
5
Low pressure EGR volume control valve
Condition
Resistance
+
-
Terminal
5
6
Temperature
°
C (
°
F)
20 (68)
1.69
Ω
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст