Nissan Maxima. Manual — part 857
MWI
OIL PRESSURE SWITCH SIGNAL CIRCUIT
MWI-43
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
YES
>> Inspection End.
NO
>> Replace the oil pressure switch.
MWI-44
< DTC/CIRCUIT DIAGNOSIS >
PARKING BRAKE SWITCH SIGNAL CIRCUIT
PARKING BRAKE SWITCH SIGNAL CIRCUIT
Description
INFOID:0000000010049591
Transmits the parking brake switch signal to the combination meter.
Component Function Check
INFOID:0000000010049592
1.
COMBINATION METER INPUT SIGNAL
1. Select “METER/M&A” on CONSULT.
2. Monitor “PKB SW” of “DATA MONITOR” while applying and releasing the parking brake.
>> Inspection End.
Diagnosis Procedure
INFOID:0000000010049593
Regarding Wiring Diagram information, refer to
.
1.
CHECK PARKING BRAKE SWITCH CIRCUIT
1. Disconnect combination meter connector and parking brake
switch connector.
2. Check continuity between combination meter harness connector
M24 (A) terminal 26 and parking brake switch harness connec-
tor E35 (B) terminal 1.
3. Check continuity between combination meter harness connector
M24 (A) terminal 26 and ground.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Repair harness or connector.
Component Inspection
INFOID:0000000010049594
1.
CHECK PARKING BRAKE SWITCH
Check continuity between parking brake switch terminal 1 and switch
case ground.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace parking brake switch.
PKB SW
Parking brake depressed
: ON
Parking brake released
: OFF
26 - 1
: Continuity should exist.
26 - Ground
: Continuity should not exist.
AWNIA1770ZZ
Component
Terminal
Condition
Continuity
Parking brake switch
1
Parking brake depressed
Yes
Parking brake released
No
AWNIA0018ZZ
MWI
WASHER LEVEL SWITCH SIGNAL CIRCUIT
MWI-45
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
WASHER LEVEL SWITCH SIGNAL CIRCUIT
Description
INFOID:0000000010049595
Transmits the washer fluid level switch signal to the combination meter.
Component Function Check
INFOID:0000000010049596
1.
COMBINATION METER INPUT SIGNAL
1. Select “METER/M&A” on CONSULT.
2. Monitor “WASHER W/L” of “DATA MONITOR” under the following conditions.
>> Inspection End.
Diagnosis Procedure
INFOID:0000000010049597
Regarding Wiring Diagram information, refer to
.
1.
CHECK WASHER FLUID LEVEL SWITCH SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect combination meter connector and washer fluid level
switch connector.
3. Check continuity between combination meter harness connector
M24 (A) terminal 29 and washer fluid level switch harness con-
nector E208 (B) terminal 1.
4. Check continuity between combination meter harness connector
M24 (A) terminal 29 and ground.
Is the inspection result normal?
YES
>> GO TO 2
NO
>> Repair harness or connector.
2.
CHECK WASHER FLUID LEVEL SWITCH GROUND CIRCUIT
Check continuity between washer fluid level switch harness connec-
tor E208 terminal 2 and ground.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Repair harness or connector.
WASHER W/L
Washer fluid level low
: ON
Washer fluid level other : OFF
29 - 1
: Continuity should exist.
29 - Ground
: Continuity should not exist.
AWNIA1771ZZ
2 - Ground
: Continuity should exist.
AWNIA0312ZZ
MWI-46
< DTC/CIRCUIT DIAGNOSIS >
WASHER LEVEL SWITCH SIGNAL CIRCUIT
Component Inspection
INFOID:0000000010049598
1.
CHECK WASHER FLUID LEVEL SWITCH
Check continuity between washer fluid level switch terminals 1 and 2.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace washer fluid level switch.
Terminal
Washer fluid level
Continuity
1 - 2
Low
Yes
Other
No
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст