Nissan Maxima. Manual — part 667
EVAP CONTROL SYSTEM PRESSURE SENSOR
FL-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
L
M
A
FL
N
P
O
EVAP CONTROL SYSTEM PRESSURE SENSOR
Removal and Installation
INFOID:0000000009469809
REMOVAL
1. Remove rear stabilizer bar clamps and position rear stabilizer bar aside. Refer to
.
2. Disconnect EVAP hose from EVAP canister.
3. Disconnect EVAP control system pressure sensor.
4. Remove EVAP control system pressure sensor and O-ring.
CAUTION:
Do not reuse O-ring.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Do not reuse O-ring.
FL-18
< DISASSEMBLY AND ASSEMBLY >
FUEL LEVEL SENSOR UNIT
DISASSEMBLY AND ASSEMBLY
FUEL LEVEL SENSOR UNIT
Disassembly and Assembly
INFOID:0000000009469810
Fuel Level Sensor Unit
Disassembly
NOTE:
Before disassembly, note the proper placement of the wires to the correct terminals and correct wire routing to
the terminals.
1. Disconnect the red, white, and double black wire connectors.
• Press the tabs on the terminals to release the locking tabs.
ALBIA0668ZZ
1.
Harness connectors
2.
Fuel level sensor unit
3.
Fuel tank temperature sensor
4.
Float arm assembly
ALBIA0669ZZ
FUEL LEVEL SENSOR UNIT
FL-19
< DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
J
K
L
M
A
FL
N
P
O
2. Release the two clips and remove the fuel tank temperature
sensor from the pump assembly.
3. Release the tab (A) and slide the fuel level sensor unit and float
arm assembly (B) up to remove.
Assembly
NOTE:
Assembly is the reverse order of disassembly.
• Ensure proper placement of the wires to the correct terminals and correct wire routing to the terminals.
• After connecting terminals, ensure they are securely locked and can not be pulled out.
• When installing the fuel level sensor unit, push down until the tab is locked into place.
ALBIA0670ZZ
ALBIA0671ZZ
FL-20
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Fuel Tank
INFOID:0000000009469811
Standard and Limit
Fuel tank capacity
Approx. 75.6 (20 US gal, 16-5/8 Imp gal)
Fuel recommendation
MA-15, "FOR USA AND CANADA : Fluids and Lubri-
(United States and Canada),
(Mexico)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст