Nissan Maxima. Manual — part 171
AV-504
< REMOVAL AND INSTALLATION >
[COLOR DISPLAY - W/ BOSE]
REAR VIEW CAMERA
REAR VIEW CAMERA
Removal and Installation
INFOID:0000000009471417
REMOVAL
1. Remove the license plate finisher. Refer to
EXL-166, "Removal and Installation"
2. Remove trunk lid finisher. Refer to
.
3. Disconnect the rear view camera connector (B), press the rear
view camera tab (A) and remove the rear view camera (1).
INSTALLATION
Installation is in the reverse order of removal.
Adjustment
INFOID:0000000009471418
REAR VIEW CAMERA
For adjustment on the rear view camera, refer to
DLK-12, "ADDITIONAL SERVICE WHEN REPLACING
CONTROL UNIT : Special Repair Requirement"
.
ALNIA1156ZZ
AV
DIAGNOSIS AND REPAIR WORKFLOW
AV-505
< BASIC INSPECTION >
[COLOR DISPLAY - W/BOSE & NAVI]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000009471419
OVERALL SEQUENCE
• Reference 1··· Refer to
AV-536, "CONSULT Function (MULTI AV)"
• Reference 2··· Refer to
DETAILED FLOW
1.
CHECK SYMPTOM
Check the malfunction symptoms by performing the following items.
• Interview the customer to obtain the malfunction information (conditions and environment when the malfunc-
tion occurred).
• Check the symptom.
>> GO TO 2.
2.
SELF-DIAGNOSIS (CONSULT)
1. Connect CONSULT and perform “SELF-DIAGNOSIS” for “MULTI AV”.
NOTE:
Skip to step 4 of the diagnosis procedure if “MULTI AV” is not displayed.
2. Check if any DTC No. is displayed in the self-diagnosis results.
AWNIA2486GB
AV-506
< BASIC INSPECTION >
[COLOR DISPLAY - W/BOSE & NAVI]
DIAGNOSIS AND REPAIR WORKFLOW
Is any DTC No. displayed?
YES
>> GO TO 3.
NO
>> GO TO 4.
3.
CHECK SELF-DIAGNOSIS RESULTS (CONSULT)
1. Check the DTC No. indicated in the self-diagnosis results.
2. Perform the relevant diagnosis referring to the DTC No. list. Refer to
NOTE:
Start with the diagnosis for the CAN communication system if “CAN COMM CIRCUIT [U1000] or CONTROL
UNIT (CAN) [U1010]” is displayed.
>> GO TO 5.
4.
PERFORM DIAGNOSIS BY SYMPTOM
Perform the relevant diagnosis referring to the diagnosis chart by symptom. Refer to
.
>> GO TO 5.
5.
REPAIR OR REPLACE MALFUNCTIONING PARTS
Repair or replace the identified malfunctioning parts.
NOTE:
Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC No. has
been indicated in the self-diagnosis results.
>> GO TO 6.
6.
CHECK AFTER REPAIR
1. Perform self-diagnosis for “MULTI AV” with CONSULT after repairing or replacing the malfunctioning
parts.
2. Check if any DTC No. is displayed in the self-diagnosis results.
Is any DTC No. displayed?
YES
>> GO TO 3.
NO
>> GO TO 7.
7.
FINAL CHECK
Perform the operation check to confirm that the malfunction symptom is solved or that any other symptoms
are present.
Are any symptoms present?
YES
>> GO TO 4.
NO
>> Inspection End.
AV
INSPECTION AND ADJUSTMENT
AV-507
< BASIC INSPECTION >
[COLOR DISPLAY - W/BOSE & NAVI]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
INSPECTION AND ADJUSTMENT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description
INFOID:0000000009471420
BEFORE REPLACEMENT
When replacing AV control unit, save current vehicle specification with CONSULT configuration before
replacement.
AFTER REPLACEMENT
CAUTION:
When replacing AV control unit, you must perform “WRITE CONFIGURATION” with CONSULT.
• Complete the procedure of “WRITE CONFIGURATION” in order.
• If you set incorrect “WRITE CONFIGURATION”, incidents might occur.
• Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Re-
quirement
INFOID:0000000009471421
1.
SAVING VEHICLE SPECIFICATION
-CONSULT Configuration
Perform “READ CONFIGURATION” to save current vehicle specification. Refer to
TION (AV CONTROL UNIT) : Description"
NOTE:
If “READ CONFIGURATION” can not be used, use the “WRITE CONFIGURATION - Manual selection”.
>> GO TO 2.
2.
REPLACE AV CONTROL UNIT
Replace AV control unit. Refer to
AV-652, "Removal and Installation"
>> GO TO 3.
3.
WRITING VEHICLE SPECIFICATION
-CONSULT Configuration
Perform “WRITE CONFIGURATION - Config file” or “WRITE CONFIGURATION - Manual selection” to write
vehicle specification. Refer to
AV-508, "CONFIGURATION (AV CONTROL UNIT) : Special Repair Require-
>> GO TO 4.
4.
OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course
lines) are normal.
>> WORK END
CONFIGURATION (AV CONTROL UNIT)
CONFIGURATION (AV CONTROL UNIT) : Description
INFOID:0000000009471422
• Since vehicle specifications are not included in the AV control unit after replacement, it is required to write
vehicle specifications with CONSULT.
• Configuration has three functions as follows.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст