Nissan Maxima. Manual — part 132
AV-348
< SYSTEM DESCRIPTION >
[COLOR DISPLAY - W/ BOSE]
HANDS-FREE PHONE SYSTEM
Component Parts Location
INFOID:0000000009471296
1.
Tweeter LH M51
2.
Center speaker M130
3.
Tweeter RH M52
4.
AV control unit M152, M153, M154,
M155, M156, M157, M158, M159 (lo-
cated behind A/C and AV switch as-
sembly)
5.
Display unit M141
6.
A/C and AV switch assembly M98
AWNIA3231ZZ
AV
HANDS-FREE PHONE SYSTEM
AV-349
< SYSTEM DESCRIPTION >
[COLOR DISPLAY - W/ BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Component Description
INFOID:0000000009471297
7.
Steering angle sensor M53 [located
in steering column behind combina-
tion switch(spiral cable)]
8.
Steering wheel audio control switch-
es
9.
USB interface M211 (view in center
console)
10. Aux jack M209
11. Rear subwoofers (view under rear
parcel shelf)
LH B106
RH B107
12. Satellite radio tuner (if equipped)
B111
13. Bluetooth
®
control unit B128, B130,
B131
14. BOSE speaker amp B109, B110
15. Microphone R7
16. Rear view camera T101
17. Front door speaker
LH D3
RH D103
18. Rear door speaker
LH D202
RH D302
Part name
Description
AV control unit
• Receives telephone voice signal from Bluetooth
®
control unit
• Sends telephone voice and voice guidance signals to the speakers
BOSE speaker amp.
• Receives audio signals from the AV control unit
• Outputs amplified audio signals to the speakers.
Front door speaker
Receives telephone voice and voice guidance signals from the AV control unit
through the BOSE speaker amp.
Front tweeter
Center speaker
Steering wheel audio control switches
• Start a voice recognition session
• Answer and end telephone calls
• Adjust the volume level
Microphone
Sends voice signals to Bluetooth
®
control unit
Bluetooth
®
control unit
Controls hands-free phone functions
Bluetooth
®
antenna
Sends telephone voice signal to Bluetooth
®
control unit
AV-350
< SYSTEM DESCRIPTION >
[COLOR DISPLAY - W/ BOSE]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
Diagnosis Description
INFOID:0000000009471298
MULTIFUNCTION SWITCH AND PRESET SWITCH SELF-DIAGNOSIS FUNCTION
The ON/OFF operation (continuity) of each switch in the multifunction switch and preset switch can be
checked.
Self-Diagnosis Mode
• Press the BACK switch and the
switch of the 8-direction
switches within 10 seconds after turning the ignition switch from
OFF to ACC and hold them for 3 seconds or more. Then the
buzzer sounds, all indicators of the preset switch illuminate, and
the self-diagnosis mode starts.
• The continuity of each switch at the ON position can be checked
by pressing the switch. The buzzer sounds if the switch is normal.
NOTE:
The disk eject switch cannot be checked.
Finishing Self-diagnosis Mode
Self-diagnosis mode is canceled when the ignition switch is turned OFF.
MULTI AV SYSTEM ON BOARD DIAGNOSIS FUNCTION
• The AV control unit diagnosis function starts up with multifunction switch operation and the AV control unit
performs a diagnosis for each unit in the system during the on board diagnosis.
• Perform a CONSULT diagnosis if the on board diagnosis does not start, e.g., if the screen does not display
anything, the multifunction switch does not function, etc.
ON BOARD DIAGNOSIS
Description
• The trouble diagnosis function has a self-diagnosis mode for conducting trouble diagnosis automatically and
a confirmation/adjustment mode for operating manually.
• Self-diagnosis mode performs the AV control unit diagnosis and the connection diagnosis between each of
the units that make up the system, and it indicates the results to the display.
• The confirmation/adjustment mode allows the technician to check, modify or adjust the vehicle signals and
set values, as well as to monitor the system error records and system communication status. The checking,
modifying or adjusting generally requires human intervention and judgment (the system cannot make judg-
ment automatically).
On Board Diagnosis Item
JSNIA1072GB
Mode
Description
Self-Diagnosis
• AV control unit diagnosis
• Perform the connection diagnosis between each of the units.
AV
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
AV-351
< SYSTEM DESCRIPTION >
[COLOR DISPLAY - W/ BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
STARTING PROCEDURE
1. Start the engine.
2. Turn the audio system OFF.
3. While pressing the SETTING button, turn the volume control dial
clockwise or counterclockwise for 40 clicks or more. (When the
self-diagnosis mode is started, a short beep will be heard.)
• Shifting from current screen to previous screen is performed
by pressing the BACK button.
4. The trouble diagnosis initial screen is displayed, and then the
items of “Self Diagnosis” and “Confirmation/Adjustment” can be
selected.
SELF-DIAGNOSIS MODE
1. Start the self-diagnosis function and select “Self-diagnosis”.
NOTE:
Because the start condition of diagnosis function is a switch
operation, the on board diagnosis function cannot start up if any
malfunction is detected in the AV communication circuit between
AV control unit and multifunction switch.
-
Self-diagnosis subdivision screen is displayed, and the self-
diagnosis mode starts.
-
The bar graph visible on the center of the self-diagnosis subdivi-
sion screen indicates progress of the trouble diagnosis.
Confirmation/
Adjustment
Display Diagnosis
The confirmation of the tint with the color spectrum bar display and shad-
ing of color with the gradation bar display can be performed.
Vehicle Signals
Diagnosis of signals can be performed for vehicle speed, parking brake,
lights, ignition switch, and reverse.
Speaker Test
The connection of a speaker can be confirmed by test tone.
Error History (Detailed)
System malfunctions and the frequency when occurring in the past are
displayed. When the malfunctioning item is selected, the time and place
that the selected malfunction last occurred are displayed.
Camera Cont.
The signal connected to camera control unit can be checked and the
guiding line position that overlaps rear view camera image can be adjust-
ed.
Vehicle CAN Diagnosis
The transmitting/receiving of CAN communication can be monitored.
AV COMM Diagnosis
The communication condition of each unit of MULTI AV system can be
monitored.
Delete Unit Connection Log
Erase the connection history of unit and error history
Initialize Settings
Initializes the AV control unit memory.
Mode
Description
JSNIA1073GB
AWNIA1735GB
JSNIA0139GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст