Nissan Maxima. Manual — part 851
MWI
METER SYSTEM
MWI-19
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ODO/TRIP METER : Component Description
INFOID:0000000010049550
SHIFT POSITION INDICATOR
SHIFT POSITION INDICATOR : System Diagram
INFOID:0000000010049551
SHIFT POSITION INDICATOR : System Description
INFOID:0000000010049552
The TCM receives CVT indicator signals from the transmission range switch. The TCM then sends CVT posi-
tion indicator signals to the combination meter via CAN communication lines. The combination meter indicates
the received shift position.
4.
TCM F15
5.
BCM M18, M19, M20, M21 (view with
instrument panel removed)
6.
ABS actuator and electric unit (control
unit) E26
7.
Fuel level sensor unit and fuel pump
(fuel level sensor) B42 (view with rear
seat and inspection hole cover re-
moved)
⇐: Front
8.
Oil pressure switch F41 (view with en-
gine removed)
9.
Parking brake switch E35 (view with in-
strument lower cover LH removed)
Unit
Description
Combination meter
Indicates the vehicle speed according to the vehicle speed signal received from ABS actuator and
electric unit (control unit) via CAN communication.
ABS actuator and electric unit
(control unit)
Transmits the vehicle speed signal to the combination meter with CAN communication line.
AWNIA2703GB
MWI-20
< SYSTEM DESCRIPTION >
METER SYSTEM
SHIFT POSITION INDICATOR : Component Parts Location
INFOID:0000000010049553
1.
Combination meter M23, M24
2.
IPDM E/R E17, E18, E201, F10
3.
ECM E10
AWNIA2477GB
MWI
METER SYSTEM
MWI-21
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SHIFT POSITION INDICATOR : Component Description
INFOID:0000000010049554
WARNING LAMPS/INDICATOR LAMPS
WARNING LAMPS/INDICATOR LAMPS : System Diagram
INFOID:0000000010049555
WARNING LAMPS/INDICATOR LAMPS : System Description
INFOID:0000000010049556
OIL PRESSURE WARNING LAMP
The oil pressure warning lamp is controlled by the IPDM E/R (intelligent power distribution module engine
room).
Low oil pressure causes the oil pressure switch to provide a ground signal to the IPDM E/R. The IPDM E/R
then signals the combination meter (unified meter control unit) via the CAN communication lines and ground is
provided to the oil pressure warning lamp.
When power and ground are supplied, the oil pressure warning lamp illuminates.
4.
TCM F15
5.
BCM M18, M19, M20, M21 (view with
instrument panel removed)
6.
ABS actuator and electric unit (control
unit) E26
7.
Fuel level sensor unit and fuel pump
(fuel level sensor) B42 (view with rear
seat and inspection hole cover re-
moved)
⇐: Front
8.
Oil pressure switch F41 (view with en-
gine removed)
9.
Parking brake switch E35 (view with in-
strument lower cover LH removed)
Unit
Description
Combination meter
Displays the shift position using shift position signal received from TCM.
TCM
Transmits the shift position signal to the combination meter via CAN communication.
AWNIA0009GB
MWI-22
< SYSTEM DESCRIPTION >
METER SYSTEM
WARNING LAMPS/INDICATOR LAMPS : Component Parts Location
INFOID:0000000010049557
1.
Combination meter M23, M24
2.
IPDM E/R E17, E18, E201, F10
3.
ECM E10
AWNIA2477GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст