Nissan Maxima. Manual — part 873
MWI
COMPASS
MWI-107
< WIRING DIAGRAM >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ABNIA3738GB
MWI-108
< WIRING DIAGRAM >
COMPASS
Wiring Diagram - WITHOUT HOMELINK UNIVERSAL TRANSCEIVER
INFOID:0000000010049613
ABNWA1306GB
MWI
COMPASS
MWI-109
< WIRING DIAGRAM >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ABNIA5149GB
MWI-110
< SYMPTOM DIAGNOSIS >
THE FUEL GAUGE POINTER DOES NOT MOVE
SYMPTOM DIAGNOSIS
THE FUEL GAUGE POINTER DOES NOT MOVE
Description
INFOID:0000000010049614
Fuel gauge needle will not move from a certain position.
Diagnosis Procedure
INFOID:0000000010049615
1.
CHECK COMBINATION METER INPUT SIGNAL
1. Select “METER/M&A” on CONSULT.
2. Using “FUEL METER” of “DATA MONITOR”, compare the monitor value with the fuel gauge reading on
the combination meter. Refer to
MWI-40, "Component Function Check"
Does monitor value match fuel gauge reading?
YES
>> GO TO 2
NO
>> Replace combination meter. Refer to
MWI-122, "Removal and Installation"
2.
CHECK FUEL LEVEL SENSOR SIGNAL CIRCUIT
Check the fuel level sensor signal circuit. Refer to
.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Repair harness or connector.
3.
CHECK FUEL LEVEL SENSOR UNIT AND FUEL PUMP (FUEL LEVEL SENSOR)
Perform a unit check for the fuel level sensor unit and fuel pump (fuel level sensor). Refer to
.
Is the inspection result normal?
YES
>> GO TO 4
NO
>> Replace fuel level sensor unit and fuel pump (fuel level sensor). Refer to
4.
CHECK FLOAT INTERFERENCE
Check that the float arm does not interfere or bind with any of the components in the fuel tank.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-122, "Removal and Installation"
NO
>> Repair or replace malfunctioning parts.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст