Nissan Maxima. Manual — part 345
DOOR LOCK ACTUATOR
DLK-99
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Is the inspection result normal?
YES
>> Replace front door lock actuator RH.
NO
>> Repair or replace harness.
3.
CHECK INTERMITTENT INCIDENT
GI-41, "Intermittent Incident"
.
>> Inspection End.
REAR LH
REAR LH : Description
INFOID:0000000009471687
Locks/unlocks the door with the signal from BCM.
REAR LH : Component Function Check
INFOID:0000000009471688
1.
CHECK FUNCTION
1. Use CONSULT to perform Active Test (“DOOR LOCK”).
2. Touch “ALL LOCK” or “ALL UNLOCK” to check that it works normally.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-99, "REAR LH : Diagnosis Procedure"
.
REAR LH : Diagnosis Procedure
INFOID:0000000009471689
Regarding Wiring Diagram information, refer to
.
1.
CHECK DOOR LOCK ACTUATOR SIGNAL
Check voltage between BCM connector and ground.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> GO TO 2
2.
CHECK DOOR LOCK ACTUATOR CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect BCM and rear door lock actuator LH connectors.
3. Check continuity between BCM connector and rear door lock actuator LH connectors.
4. Check continuity between BCM connector and ground.
Terminals
Condition of door lock and
unlock switch
Voltage (V)
(Approx.)
(+)
(–)
BCM
connector
Terminal
M17
8
Ground
Lock
0
→ Battery voltage → 0
10
Unlock
0
→ Battery voltage → 0
BCM connector
Terminal
Door lock actuator
connector
Terminal
Continuity
M17
8
D205
1
Yes
10
2
DLK-100
< DTC/CIRCUIT DIAGNOSIS >
DOOR LOCK ACTUATOR
Is the inspection result normal?
YES
>> Replace rear door lock actuator LH.
NO
>> Repair or replace harness.
3.
CHECK INTERMITTENT INCIDENT
GI-41, "Intermittent Incident"
>> Inspection End.
REAR RH
REAR RH : Description
INFOID:0000000009471690
Locks/unlocks the door with the signal from BCM.
REAR RH : Component Function Check
INFOID:0000000009471691
1.
CHECK FUNCTION
1. Use CONSULT to perform Active Test (“DOOR LOCK”).
2. Touch “ALL LOCK” or “ALL UNLOCK” to check that it works normally.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-100, "REAR RH : Diagnosis Procedure"
REAR RH : Diagnosis Procedure
INFOID:0000000009471692
Regarding Wiring Diagram information, refer to
.
1.
CHECK DOOR LOCK ACTUATOR SIGNAL
Check voltage between BCM connector and ground.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> GO TO 2
2.
CHECK DOOR LOCK ACTUATOR CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect BCM and rear door lock actuator RH connectors.
3. Check continuity between BCM connector and rear door lock actuator RH connectors.
BCM connector
Terminal
Continuity
M17
8
Ground
No
10
Terminals
Condition of door lock and
unlock switch
Voltage (V)
(Approx.)
(+)
(–)
BCM
connector
Terminal
M17
8
Ground
Lock
0
→ Battery voltage → 0
10
Unlock
0
→ Battery voltage → 0
DOOR LOCK ACTUATOR
DLK-101
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
4. Check continuity between BCM connector and ground.
Is the inspection result normal?
YES
>> Replace rear door lock actuator RH.
NO
>> Repair or replace harness.
3.
CHECK INTERMITTENT INCIDENT
GI-41, "Intermittent Incident"
.
>> Inspection End.
FUEL FILLER LID LOCK ACTUATOR
FUEL FILLER LID LOCK ACTUATOR : Description
INFOID:0000000009471693
Locks/unlocks the door with the signal from BCM.
FUEL FILLER LID LOCK ACTUATOR : Component Function Check
INFOID:0000000009471694
1.
CHECK FUNCTION
1. Use CONSULT to perform Active Test (“DOOR LOCK”).
2. Touch “ALL LOCK” or “ALL UNLOCK” to check that it works normally.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-101, "FUEL FILLER LID LOCK ACTUATOR : Diagnosis Procedure"
.
FUEL FILLER LID LOCK ACTUATOR : Diagnosis Procedure
INFOID:0000000009471695
Regarding Wiring Diagram information, refer to
.
1.
CHECK OUTPUT SIGNAL
Check voltage between BCM connector and ground.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> GO TO 2
2.
CHECK FUEL LID DOOR LOCK ACTUATOR CIRCUIT
BCM connector
Terminal
Door lock actuator
connector
Terminal
Continuity
M17
8
D305
5
Yes
10
6
BCM connector
Terminal
Continuity
M17
8
Ground
No
10
Terminals
Condition of door lock and
unlock switch
Voltage (V)
(Approx.)
(+)
(–)
BCM
connector
Terminal
M17
8
Ground
Lock
0
→ Battery voltage → 0
9
Unlock
0
→ Battery voltage → 0
DLK-102
< DTC/CIRCUIT DIAGNOSIS >
DOOR LOCK ACTUATOR
1. Turn ignition switch OFF.
2. Disconnect BCM and fuel lid door lock actuator connector.
3. Check continuity between BCM connector and fuel lid door lock actuator connector.
4. Check continuity between BCM connector and ground.
Is the inspection result normal?
YES
>> Replace fuel lid door lock actuator.
NO
>> Repair or replace harness.
3.
CHECK INTERMITTENT INCIDENT
GI-41, "Intermittent Incident"
>> Inspection End.
BCM connector
Terminal
fuel lid door lock actuator con-
nector
Terminal
Continuity
M17
9
B27
1
Yes
8
2
BCM connector
Terminal
Continuity
M17
8
Ground
No
9
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст