Nissan Maxima. Manual — part 7
ADP-20
< SYSTEM DESCRIPTION >
AUTOMATIC DRIVE POSITIONER SYSTEM
MEMORY FUNCTION : Component Description
INFOID:0000000010051690
CONTROL UNITS
INPUT PARTS
Switches
Sensors
OUTPUT PARTS
EXIT ASSIST FUNCTION
7.
A. Door mirror LH D4
B. Door mirror RH D107
C. Front door switch LH B8
8.
Door mirror remote control switch
M108
9.
Seat memory switch D13
: Front
Item
Function
Driver seat control unit
• The address of each part is recorded.
• Operates each motor of seat to the registered position.
• Requests the operations of steering column and door mirrors to automatic drive
positioner control unit
Automatic drive positioner control unit
Operates the steering column and door mirrors with the instructions from the driver
seat control unit.
Item
Function
Memory switch 1/2
The registration and memory function can be performed with its operation.
Item
Function
Door mirror sensor (LH/RH)
Detect the up/down and left/right position of outside mirror face.
Tilt and telescopic sensors
Detect the up/down and front/rear position of steering column.
Lifting sensor (front)
Detect the up/down position of seat lifting (front).
Lifting sensor (rear)
Detect the up/down position of seat lifting (rear).
Reclining sensor
Detect the tilt of seatback.
Sliding sensor
Detect the front/rear position of seat.
Item
Function
Door mirror motor (LH/RH)
Move the outside mirror face upward/downward and leftward/rightward.
Tilt and telescopic motors
Move the steering column up/down and front/rear.
Lifting motor (front)
Move the seat lifter (front) upward/downward.
Lifting motor (rear)
Move the seat lifter (rear) upward/downward.
Reclining motor
Tilt and raise up the seatback.
Sliding motor
Slide the seat forward/backward.
Memory indicator
Illuminates or blinks according to the registration/operation status.
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-21
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
EXIT ASSIST FUNCTION : System Diagram
INFOID:0000000010051691
EXIT ASSIST FUNCTION : System Description
INFOID:0000000010051692
OUTLINE
When exiting, if the conditions are satisfied, the seat is moved backward from normal sitting position and the
steering column is moved up.
The seat slide amount at entry/exit operation can be changed.
NOTE:
• This function is set to ON before delivery (initial setting).
• Further information for the system setting procedure. Refer to Owner’s Manual.
OPERATION PROCEDURE
1. Open the front door LH with ignition switch in OFF position.
2. Front seat LH and steering column will move to the exiting position.
OPERATION CONDITION
Satisfy all of the following items. The exit assist function is not performed if these items are not satisfied.
DETAIL FLOW
ALJIA0369GB
Item
Request status
Ignition switch
OFF
System setting [Entry/exit assist function]
ON
Initialization
Done
Switch inputs
• Power seat switch
• ADP steering switch
• Door mirror remote control switch
• Set switch
• Seat memory switch
OFF
(Not operated)
CVT selector lever
P position
ADP-22
< SYSTEM DESCRIPTION >
AUTOMATIC DRIVE POSITIONER SYSTEM
Order
Input
Output
Control unit condition
1
Front door switch LH
—
Driver seat control unit receives front door switch LH signal (open)
from BCM via CAN communication.
2
—
Motors (seat sliding,
tilt)
Driver seat control unit operates the seat sliding motor, which recog-
nizes that the driver side door is opened with ignition switch OFF.
Driver seat control unit then requests the operations of tilt motor to
auto drive positioner control unit via UART communication. The au-
tomatic drive positioner control unit operates each motor for a con-
stant amount.
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-23
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
EXIT ASSIST FUNCTION : Component Parts Location
INFOID:0000000010051693
ALJIA0580ZZ
1.
Push-button ignition switch M38
2.
BCM M16, M17, M18, M19 (view
with instrument panel removed)
3.
TCM F15
4.
A. ADP steering switch M39
B. Tilt motor M71, telescopic motor
M73
5.
A. Power seat switch LH B213
B. Reclining motor B222
C. Driver seat control unit B203,
B211
6.
Automatic drive positioner control
unit M63, M67 (view with instrument
panel removed)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст