Nissan Maxima. Manual — part 761
DIAGNOSIS AND REPAIR WORKFLOW
INL-3
< BASIC INSPECTION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000009465406
OVERALL SEQUENCE
AWLIA1907GB
INL-4
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORKFLOW
DETAILED FLOW
1.
INTERVIEW FOR MALFUNCTION
Find out what the customer's concerns are.
>> GO TO 2
2.
SYMPTOM CHECK
Verify the symptom from the customer's information.
>> GO TO 3
3.
BASIC INSPECTION
Check the operation of each part. Check that any concerns occur other than those mentioned in the customer
interview.
>> GO TO 4
4.
SELF-DIAGNOSIS WITH CONSULT
Perform the self-diagnosis with CONSULT. Check that any DTC is detected.
Is any DTC detected?
YES
>> GO TO 5
NO
>> GO TO 6
5.
TROUBLE DIAGNOSIS BY DTC
Perform the trouble diagnosis for the detected DTC. Specify the malfunctioning part.
>> GO TO 9
6.
FAIL-SAFE ACTIVATION CHECK
Determine if the customer's concern is related to fail-safe activation.
Does the fail-safe activate?
YES
>> GO TO 7
NO
>> GO TO 8
7.
SYSTEM DIAGNOSIS
Perform the system diagnosis for the system in which the fail-safe activates. Specify the malfunctioning part.
>> GO TO 9
8.
SYMPTOM DIAGNOSIS
Perform the symptom diagnosis. Refer to
. Specify the malfunctioning part.
>> GO TO 9
9.
MALFUNCTION PART REPAIR
Repair or replace the malfunctioning part.
>> GO TO 10
10.
REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT)
Perform the self-diagnosis with CONSULT. Verify that no DTCs are detected. Erase all DTCs detected prior to
the repair. Verify that DTC is not detected again.
Is any DTC detected?
DIAGNOSIS AND REPAIR WORKFLOW
INL-5
< BASIC INSPECTION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
YES
>> GO TO 5
NO
>> GO TO 11
11.
REPAIR CHECK (OPERATION CHECK)
Check the operation of each part.
Does it operate normally?
YES
>> Inspection End
NO
>> GO TO 3
INL-6
< SYSTEM DESCRIPTION >
INTERIOR ROOM LAMP CONTROL SYSTEM
SYSTEM DESCRIPTION
INTERIOR ROOM LAMP CONTROL SYSTEM
System Diagram
INFOID:0000000009465407
System Description
INFOID:0000000009465408
OUTLINE
• Interior room lamps* are controlled by interior room lamp timer control function of BCM.
*:Front room/map lamp assembly, foot lamps and rear personal lamps (when front room/map lamp assembly
switch is in DOOR position).
• Trunk room lamp is controlled by trunk room lamp control function of BCM.
• Step lamps are controlled by step lamp control function of BCM.
AWLIA1997GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст