Qashqai J11. Meter warning lamp & indicator — part 2
MWI-18
< SYSTEM DESCRIPTION >
SYSTEM (METER SYSTEM)
INFORMATION DISPLAY : System Diagram
INFOID:0000000010329956
INFORMATION DISPLAY : System Description
INFOID:0000000010329957
DESCRIPTION
• The combination meter receives signals necessary for controlling the operation of the information display
from each unit, sensor and switch.
• The combination meter incorporates a trip computer that displays the warning/information according to the
information received from each unit, sensor and switch.
• The combination meter shows the following functions on the information display.
- Odo/trip meter
- Shift position indicator
- Clock
- Trip computer
- Interrupt indication
- Settings
ODO/TRIP METER
The combination meter calculates mileage, based on the following signals and displays the mileage on the
information display.
SHIFT POSITION INDICATOR
Manual Mode
WHEN OPERATED WITH CVT SHIFT SELECTOR
1.
The combination meter receives the following signal and transmits the signal to TCM via CAN communi-
cation.
JSNIA3488GB
Signal name
Signal path
Ignition signal
—
Vehicle speed signal
ABS actuator and electric unit (control unit)
Combination meter
Signal name
Signal path
Manual mode signal
CVT shift selector
Combination meter
TCM
Non-manual mode signal
Manual mode shift up signal
Manual mode shift down signal
MWI
SYSTEM (METER SYSTEM)
MWI-19
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
2.
TCM judges a shift position, based on a signal received from the combination meter via CAN communica-
tion and transmits the following signals to the combination meter via CAN communication.
3.
The combination meter activates the shift position indicator, and manual mode information, based on sig-
nals received from TCM via CAN communication.
WHEN OPERATED WITH PADDLE SHIFTER
1.
The combination meter receives the following signal and transmits the signal to TCM via CAN communi-
cation.
2.
TCM judges a shift position and manual mode information, based on a signal received from the combina-
tion meter via CAN communication and transmits the following signals to the combination meter via CAN
communication.
3.
The combination meter activates the shift position indicator based on signal received from TCM via CAN
communication.
Non-manual Mode
• Combination meter inputs non-manual mode signal from CVT shift selector (manual mode switch), and
transmits the signals to TCM with CAN communication line.
• TCM transmits shift position signal to combination meter with CAN communication line.
• Combination meter indicates shift position when receiving shift position signal.
TRIP COMPUTER
Current Fuel Consumption
The combination meter calculates current fuel consumption based on the following signals, and the calculated
value is displayed on the information display.
NOTE:
• Current fuel consumption on the information display is updated approximately every 0.1 seconds.
• Current fuel consumption on the information display shows 0 l/100km (0 mpg) when vehicle speed is 0 km/h
(0 MPH).
Average Fuel Consumption
The combination meter calculates average fuel consumption based on the following signals, and the calcu-
lated value is displayed on the information display.
Signal name
Signal path
Shift position signal
TCM
Combination meter
Signal name
Signal path
Paddle shifter shift up signal
Paddle shifter
Combination meter
TCM
Paddle shifter shift down signal
Signal name
Signal path
Shift position signal
TCM
Combination meter
Signal name
Signal path
Ignition signal
—
Fuel consumption monitor signal
ECM
Combination meter
Vehicle speed signal
ABS actuator and electric unit (control unit)
Combination meter
MWI-20
< SYSTEM DESCRIPTION >
SYSTEM (METER SYSTEM)
NOTE:
• Average fuel consumption on the information display is updated approximately every 30 seconds.
• Soon after a reset or when the ignition switch is turned ON right after battery removal and installation, “
−−−
”
is displayed until after a travel of 30 seconds and approximately 500 m (0.31 mile).
• The numerical figure following after “
φ
” indicated on the vehicle information display shows average fuel con-
sumption.
Range (Distance to Empty)
The combination meter calculates range based on the following signals, and the calculated value is displayed
on the information display.
NOTE:
• Distance to empty on the information display is updated approximately every 30 seconds.
• When the ignition switch is turned from OFF to ON, “
−−−
” is displayed until after a travel of approximately
500 m (0.31 mile).
• The indicated values may not match each other when refueling with the ignition switch ON.
Average Vehicle Speed
The combination meter calculates average vehicle speed based on the following signals, and the calculated
value is displayed on the information display.
NOTE:
• Average vehicle speed on the information display is updated approximately every 30 seconds.
• Soon after a reset or when the ignition switch is turned ON right after battery removal and installation, “
−−−
”
is displayed until after a 30 seconds.
Elapsed Time
The combination meter measures and displays elapsed time (ignition switch ON time).
Driving Distance
The combination meter calculates mileage, based on the following signals and displays the mileage on the
information display.
Signal name
Signal path
Ignition signal
—
Fuel consumption monitor signal
ECM
Combination
meter
Vehicle speed signal
ABS actuator and electric unit (control unit)
Combination meter
Signal name
Signal path
Ignition signal
—
Fuel level sensor signal
Fuel level sensor unit
Combination meter
Fuel consumption monitor signal
ECM
Combination
meter
Vehicle speed signal
ABS actuator and electric unit (control unit)
Combination meter
Signal name
Signal path
Ignition signal
—
Vehicle speed signal
ABS actuator and electric unit (control unit)
Combination meter
Signal name
Signal path
Ignition signal
—
Vehicle speed signal
ABS actuator and electric unit (control unit)
Combination meter
MWI
SYSTEM (METER SYSTEM)
MWI-21
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Outside Temperature
• The combination meter corrects an indicated temperature, based on various signals.
• The combination meter calculates outside temperature based on the following signals, and the calculated
value is displayed on the information display.
Correction Process (Temperature indicated soon after the ignition switch ON)
• A temperature indicated soon after the ignition switch is turned ON depends on the time from the ignition
switch OFF to ON and a temperature detected by the ambient sensor.
When any condition described below is met, an ambient sensor-detected temperature is indicated.
- Time from the ignition switch OFF to ON
≥
Predetermined time
- Sensor-detected temperature < Temperature at the last ignition switch OFF
Correction Process (Temperature at the Ignition switch ON)
• A temperature indicated when the ignition switch is ON depends on a vehicle speed, an ambient sensor-
detected temperature, and traveling time.
The temperature on the information display is corrected to an ambient sensor-detected temperature when the following condition
is met.
- Ambient sensor-detected temperature < Temperature on the information display
A temperature on the information display is not updated when the following condition is met.
- Ambient sensor-detected temperature
≥
Temperature on the information display
- Vehicle speed
≤
20 km/h (12 MPH)
A temperature on the information display slowly rises to an ambient sensor-detected temperature when the following condition is
met.
- Ambient sensor-detected temperature
≥
Temperature on the information display
- Vehicle speed
≥
20 km/h (12 MPH)
A temperature on the information display rapidly rises to an ambient sensor-detected temperature when the following condition
is met.
- Ambient sensor-detected temperature
≥
Temperature on the information display
- Vehicle speed
≥
20 km/h (12 MPH)
- When driving more than set time
NOTE:
• After an ignition switch is turned ON, “–––” is displayed until after a 2.5 seconds.
• The ambient sensor input value that is displayed on “Data Monitor” of CONSULT is the value before the cor-
rection. It may not match the indicated temperature on the information display.
• After removal and installation of the battery and combination meter, an ambient sensor-detected tempera-
ture is indicated on the information display.
• Depending on engine heat or heat on the road surfaces, an ambient temperature may be indicated higher
than actual one.
INTERRUPT INDICATION
• The combination meter displays an interrupt regarding a warning, alert, and maintenance on the information
display, based on signals received from each unit and switch.
• When conditions are satisfied, the normal screen switches to a warning screen to display an interrupt.
Door Open Warning
• When all the following operating conditions are satisfied, the combination meter displays a door open warn-
ing on the information display by an interrupt.
Signal name
Signal path
Ignition signal
—
Ambient sensor signal
Ambient sensor
Combination meter
Vehicle speed signal
ABS actuator and electric unit (control unit)
Combination meter
MWI-22
< SYSTEM DESCRIPTION >
SYSTEM (METER SYSTEM)
• The combination meter judges showing/hiding of “door open warning”, according to the signals below:
Parking Brake Release Warning
• When all the following operating conditions are satisfied, the combination meter displays a parking brake
release warning on the information display by an interrupt.
• The combination meter judges showing/hiding of “parking brake release warning”, according to the signals
below:
Low Fuel Warning
• When all the following operating conditions are satisfied, the combination meter displays a low fuel warning
on the information display by an interrupt.
*: With the vehicle in a horizontal position
• The combination meter judges showing/hiding of “low fuel warning”, according to the signals below:
Low tire pressure warning
• The combination meter judges showing/hiding of “low tire pressure warning”, according to the signals below:
Operating condition
Ignition switch
ON
Door
Any door is open
Signal name
Signal path
Ignition signal
—
Door switch signal
Door switch
BCM
Combination meter
Operating condition
Ignition switch
ON
Parking brake
Applied
Vehicle speed
7 km/h (4.3 MPH) or more
Signal name
Signal path
Ignition signal
—
Parking brake switch signal
Parking brake switch
Combination meter
Vehicle speed signal
ABS actuator and electric unit (control unit)
Combination meter
Operating condition
Ignition switch
ON
Fuel remaining quantity
*
Approximately 11.2
or less (including fuel
remained)
Signal name
Signal path
Ignition signal
—
Fuel level sensor signal
Fuel level sensor
Combination meter
Signal name
Signal path
Ignition signal
—
Low tire pressure warning lamp signal
BCM
Combination meter
MWI
SYSTEM (METER SYSTEM)
MWI-23
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
• For further information, refer to
BCS-9, "BODY CONTROL SYSTEM : System Description"
.
Fuel filler cap warning
• The combination meter judges showing/hiding of “fuel filler cap warning”, according to the signals below:
• For further information, refer to
MWI-18, "INFORMATION DISPLAY : System Description"
Low Outside Temperature (Alert)
• When all the following operating conditions are satisfied, the combination meter displays a low ambient tem-
perature on the information display by an interrupt.
• The combination meter judges showing/hiding of “low outside temperature”, according to the signals below:
Driver Alert (Alert)
• When all the following operating conditions are satisfied, the combination meter displays a driver alert on the
information display by an interrupt.
• The combination meter judges showing/hiding of “driver alert”, according to the signal below:
Service (Maintenance)
• When all the following operating conditions are satisfied, the combination meter displays a service warning
on the information display by an interrupt.
• The combination meter judges showing/hiding of “service warning”, according to the signals below:
Tire (Maintenance)
Signal name
Signal path
Ignition signal
—
Fuel filler cap warning display signal
ECM
Combination
meter
Operating condition
Ignition switch
ON
Ambient temperature
3
°
C (37
°
F) or less
information display
“ON” is selected in “SETTING”
Signal name
Signal path
Ignition signal
—
Ambient sensor signal
Ambient sensor
Combination meter
Operating condition
Ignition switch
Switch-ON time
Signal name
Signal path
Ignition signal
—
Operating condition
Ignition switch
ON
Mileage
More than value set in “SETTING”
Signal name
Signal path
Ignition signal
—
Vehicle speed signal
ABS actuator and electric unit (control unit)
Combination
meter
MWI-24
< SYSTEM DESCRIPTION >
SYSTEM (METER SYSTEM)
• When all the following operating conditions are satisfied, the combination meter displays a tire warning on
the information display by an interrupt.
• The combination meter judges showing/hiding of “tire warning”, according to the signals below:
Other (Maintenance)
• When all the following operating conditions are satisfied, the combination meter displays a other warning on
the information display by an interrupt.
• The combination meter judges showing/hiding of “other warning”, according to the signals below:
Meter Illumination Control Indication
The level of brightness is displayed by operating the illumination control switch on the meter.
SETTING
Warning indication timing, unit, language, and time can be set.
Clock
This function is used for adjusting the clock and switching the clock display between Show and Hide, in addi-
tion to the display method between 12 hours and 24 hours.
Units
Setting values for unit items can be adjusted to meet the user's needs.
Operating condition
Ignition switch
ON
Mileage
More than value set in “SETTING”
Signal name
Signal path
Ignition signal
—
Vehicle speed signal
ABS actuator and electric unit (control unit)
Combination meter
Operating condition
Ignition switch
ON
Mileage
More than value set in “SETTING”
Signal name
Signal path
Ignition signal
—
Vehicle speed signal
ABS actuator and electric unit (control unit)
Combination meter
Setting item
Setting range
Clock
Set clock
24 Hr
0:00 - 23:59
12 Hr
0:00 - 11:59
24/12 Hr
24 Hr
—
12 Hr
—
Clock ON/OFF
ON
—
OFF
—
MWI
SYSTEM (METER SYSTEM)
MWI-25
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Maintenance
Setting values for service, tire, and other maintenance items can be adjusted to meet the user's needs.
Alert
Setting values for travel time, and low ambient temperature can be adjusted to meet the user's needs.
Language
Setting values for language items can be adjusted to meet the user's needs.
Factory
Settings can be reset.
Settings-reject Indication
• Regarding settings-reject indications, “SETTING CAN BE OPERATED WHEN STOPPED” is shown on the
information display when indication conditions are satisfied.
• When reaching 5 km/h (3.1 MPH) after accelerating from a stopping condition, a settings-reject indication is
displayed.
• When reaching less than 1 km/h (0.6 MPH) after decelerating from 5 km/h (3.1 MPH), a settings-reject indi-
cation is cancelled to allow settings.
• The combination meter judges a vehicle condition based on the following signals and displays a settings-
reject indication on the information display.
Setting item
Unit
Temperature
Deg C
Deg F
Dist. / Fuel
Miles, MPG
km, l/100 km
km, km/l
Setting item
Setting range
Maintenance
Service
No setting, 500 km - 30,000 km
(No setting, 250 mile - 18,500 mile)
Tire
No setting, 500 km - 30,000 km
(No setting, 250 mile - 18,500 mile)
Other
No setting, 500 km - 30,000 km
(No setting, 250 mile - 18,500 mile)
Setting item
Setting range
Setting unit
Alert
Driver alert
No setting, 30 min - 360 min
30 min
Outside temp
(Low temp)
ON/OFF
—
Setting item
Language
English
French
Espanol
Signal name
Signal path
Ignition signal
—
Vehicle speed signal
ABS actuator and electric unit (control unit)
Combination meter
MWI-26
< SYSTEM DESCRIPTION >
SYSTEM (METER SYSTEM)
TIMING CHART
JSNIA2408GB
MWI
OPERATION
MWI-27
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
OPERATION
Switch Name and Function
INFOID:0000000010435910
STEERING SWITCH
METER CONTROL SWITCH
AWNIA3392ZZ
No.
Switch name
Operation
Description
1.
Enter/Up/Down switch
Press
The information display settings can be changed.
2.
Display switch
3.
Back switch
AWNIA3393ZZ
No.
Switch name
Operation
Description
1.
Illumination control switch
Press
An illuminance level of the back light of the combination meter can be adjusted.
2.
Trip reset switch
Press
• The trip meter can be switched between A and B.
• Trip meter A/B can be reset by pressing and holding the trip reset switch.
• A trip computer value displayed on the information display can be reset by
pressing and holding the trip reset switch for 1 second or more.
• All trip computer values can be reset by pressing and holding the trip reset
switch for 3 seconds or more.
MWI-28
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (COMBINATION METER)
DIAGNOSIS SYSTEM (COMBINATION METER)
Description
INFOID:0000000010483059
COMBINATION METER SELF-DIAGNOSIS MODE
The following meter functions can be checked during Combination Meter Self-Diagnosis Mode:
• Pointer sweep of speedometer, tachometer and gauges.
• Illumination of all LCD segments and color patterns for meter displays.
• Illumination of all lamps/LEDs that are controlled by the combination meter (regardless of switch status).
STARTING COMBINATION METER SELF-DIAGNOSIS MODE
NOTE:
• Check combination meter power supply and ground circuits if self-diagnosis mode does not start. Refer to
MWI-66, "COMBINATION METER : Diagnosis Procedure"
. Replace combination meter if power supply and
ground circuits are found to be normal and self-diagnosis mode does not start. Refer to
• Combination meter self-diagnosis mode will function with the ignition switch in ON. Combination meter self-
diagnosis mode will exit upon turning the ignition switch to OFF.
How to Initiate Self-Diagnosis Mode
1.
Turn ignition switch OFF.
2.
While pressing the trip reset switch (1), turn ignition switch ON.
3.
Keep the trip reset switch for 1 seconds or more.
4.
Press the trip reset switch at least 3 times. (Within 7 seconds
after the ignition switch is turned ON.)
5.
“Work instruction code” is indicated in the top portion of informa-
tion display and self-diagnosis is started.
6.
The mode switches in the order shown below each time the trip
reset switch is pressed.
NOTE:
If the trip reset switch is not operated for 20 seconds or more, the
self-diagnosis mode is automatically cancelled.
AWNIA3394ZZ
Test order
Test item
Description
1
Work instruction code
This item is displayed, but not used.
2
Part number
3
Software code
4
EEPROM code
5
Hardware code
6
P.C.B code
7
Circuit check
The pointer of the following items moves from 0 to MAX twice.
• Speedometer
• Tachometer
• Engine coolant temperature gauge
• Fuel gauge
NOTE:
If any one of the pointers does not sweep, replace combination meter.
8
Color check
*1
Performs the color check of the information display.
MWI
DIAGNOSIS SYSTEM (COMBINATION METER)
MWI-29
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
NOTE:
When the trip reset switch is pressed during the indication of Test order “10,” test item returns to Test order “2.”
*1: Color Check
*2: Error Code
9
error code
*2
Displays the error code of the following items:
• Speedometer
• Tachometer
• Engine coolant temperature gauge
• Fuel gauge
• Meter control switch
10
Warning/indicator lamp check
All warning/indicator lamp illuminate.
NOTE:
• When either one of them does not turn ON, replace combination meter.
• SRS air bag warning lamp and security indicator lamp are not illuminate.
Blue
Red
Pink
Green
Light blue
Yellow
White
White
Black
Light blue
Black
Pink
Black
Blue
Black
Dark blue
White
Blue
Test order
Test item
Description
JSNIA5944ZZ
JSNIA5945ZZ
Item
Code
Description
Action to take/Reference
Speedometer
0
Normal
—
1
A vehicle speed signal cannot be received
from ABS actuator and electric unit (control
unit).
Perform “Self Diagnostic Result” of
“ABS.”
Refer to
2
A vehicle speed signal received from the
ABS actuator and electric unit (control unit)
is abnormal.
MWI-30
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (COMBINATION METER)
How to Reset Error Code
Error codes stored in combination meter can be reset by following the instructions below:
1.
Turn ignition switch OFF.
2.
While pressing the trip reset switch, turn ignition switch ON.
3.
Keep the trip reset switch for 1 seconds or more.
4.
Press the trip reset switch at least 3 times. (Within 7 seconds after the ignition switch is turned ON.)
5.
Turn ignition switch OFF.
6.
Perform self-diagnosis and check that the error codes are reset.
CONSULT Function (METER/M&A)
INFOID:0000000010483060
APPLICATION ITEMS
CONSULT can display each diagnostic item using the diagnostic test modes shown.
SELF DIAG RESULT
.
DATA MONITOR
Display Item List
Tachometer
0
Normal
—
1
An engine speed signal cannot be received
from ECM.
Perform “Self Diagnostic Result” of
“ECM.”
Refer to
.
Fuel gauge
0
Normal
—
1
Fuel gauge circuit is short.
Refer to
.
2
Fuel gauge circuit is open.
Engine coolant temper-
ature gauge
0
Normal
—
1
An engine coolant temperature signal can-
not be received from ECM.
Perform “Self Diagnostic Result” of
“ECM.”
Refer to
.
Meter control switch
0
Normal
—
1
When judging that the illumination control
switch signal circuit is shorted for 5 minutes
or more.
.
2
When judging that the trip reset switch sig-
nal circuit is shorted for 5 minutes or more.
3
When judging that the both switch signal cir-
cuit is shored for 5 minutes or more.
—
0
Displays “0” constantly.
—
—
0
Displays “0” constantly.
—
—
0
Displays “0” constantly.
—
Item
Code
Description
Action to take/Reference
METER/M&A Diagnosis mode
Description
SELF DIAGNOSTIC RESULT
Displays combination meter self-diagnosis results.
DATA MONITOR
Displays combination meter input/output data in real time.
WARNING HISTORY
Lighting history of the warning lamp and indicator lamp can be checked.
CAN DIAG SUPPORT MNTR
The result of transmit/receive diagnosis of CAN communication can be read.
MWI
DIAGNOSIS SYSTEM (COMBINATION METER)
MWI-31
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
X: Applicable
Display item [Unit]
MAIN
SIGNALS
Description
SPEED METER
X
Displays the value of vehicle speed signal.
SPEED OUTPUT
[mph or km/h]
X
Vehicle speed signal value transmitted to other units via CAN communication.
ODO OUTPUT
[mph or km/h]
Odometer signal value transmitted to other units via CAN communication.
TACHO METER
[rpm]
X
Value of the engine speed signal received from ECM via CAN communication.
FUEL METER
[L]
X
Fuel level indicated on combination meter.
W TEMP METER
[
°
F] or [
°
C]
X
Displays the value of engine coolant temperature signal, which is input from ECM.
ABS W/L
[On/Off]
Displays [On/Off] condition of ABS warning indicator.
VDC/TCS IND
[On/Off]
Displays [On/Off] condition of VDC OFF indicator lamp.
SLIP IND
[On/Off]
Displays [On/Off] condition of SLIP indicator lamp.
BRAKE W/L
[On/Off]
Displays [On/Off] condition of brake warning indicator.
DOOR W/L
[On/Off]
Displays [On/Off] condition of door or liftgate warning message in the information
display.
HI-BEAM IND
[On/Off]
Displays [On/Off] condition of high beam indicator.
TURN IND
[On/Off]
Displays [On/Off] condition of turn indicator.
LIGHT IND
[On/Off]
Displays [On/Off] condition of light indicator.
FR FOG IND
[On/Off]
Displays [On/Off] condition of front fog lamp indicator.
OIL W/L
[On/Off]
Displays [On/Off] condition of low engine oil pressure warning message in the in-
formation display.
MIL
[On/Off]
Displays [On/Off] condition of malfunction indicator.
4WD LOCK IND
[On/Off]
Displays [On/Off] condition of AWD LOCK indicator lamp.
4WD W/L
[On/Off]
Displays [On/Off] condition of AWD warning message in the information display.
FUEL W/L
[On/Off]
Displays [On/Off] condition of low-fuel warning message.
AIR PRES W/L
[On/Off]
Displays [On/Off] condition of tire pressure warning lamp.
KEY G/Y W/L
[On/Off]
Displays [On/Off] condition of key green warning lamp.
EPS W/L
[On/Off]
Displays [On/Off] condition of EPS warning indicator.
LCD
Displays the value of Intelligent Key system message indication.
SHIFT IND
[P, R, N, D, L]
Displays shift selector position.
FUEL CAP W/L
[On/Off]
Displays [On/Off] condition of loose fuel cap warning message.
MWI-32
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (COMBINATION METER)
SPECIAL FUNCTION
Special menu
W/L ON HISTORY
• “W/L ON HISTORY” indicates the “TIME” when the warning/ indicator lamp is turned on.
• The “TIME” above is:
- 0: The condition that the warning/indicator lamp has been turned on 1 or more times after starting the engine
and waiting for 30 seconds.
- 1 - 39: The number of times the engine was restarted after the 0 condition.
- NO W/L ON HISTORY: No warning/indicator lamp history is stored.
NOTE:
• W/L ON HISTORY is not stored for approximately 30 seconds after the engine starts.
• Brake warning lamp does not store any history when the parking brake is applied or the brake fluid level gets
low.
PKB SW
[On/Off]
Displays [On/Off] condition of parking brake switch.
BUCKLE SW
[On/Off]
Displays [On/Off] condition of seat belt buckle switch LH.
PASS BUCKLE SW
[On/Off]
Displays [On/Off] condition of seat belt buckle switch RH.
BRAKE OIL SW
[On/Off]
Displays [On/Off] condition of brake fluid level switch.
DISTANCE
[Mi] or [km]
Displays distance to empty.
OUTSIDE TEMP
[
°
F or
°
C]
Displays the ambient air temperature which is input from the ambient sensor.
FUEL LOW SIG
[On/Off]
Displays [On/Off] condition of low-fuel warning signal.
STRG SW INPUT
[SW 1-SW 10, NOT INPUT]
Displays [SW 1-SW 10, NOT INPUT] condition of steering switches.
BUZZER
[On/Off]
X
Buzzer status (in the combination meter) is detected from the buzzer output signal
received from each unit via CAN communication and the warning output condition
of the combination meter.
BSW IND
[On/Off]
Displays [On/Off] condition of blind spot warning indicator.
BSW W/L
[On/Off]
Displays [On/Off] condition of blind spot warning message in the information dis-
play.
Display item [Unit]
MAIN
SIGNALS
Description
Display item
Description
W/L ON HISTORY
Lighting history of warning lamp and indicator lamp can be checked.
MWI
COMBINATION METER
MWI-33
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ECU DIAGNOSIS INFORMATION
COMBINATION METER
Reference Value
INFOID:0000000010329961
VALUES ON THE DIAGNOSIS TOOL
Monitor Item
Condition
Value/Status
SPEED METER
[km/h]
Ignition switch
ON
While driving
Input value of vehicle speed signal
(CAN communication signal)
NOTE:
655.35 is displayed when the malfunc-
tion signal is received
SPEED OUTPUT
[km/h]
Ignition switch
ON
While driving
Output value of vehicle speed signal
(CAN communication signal)
NOTE:
655.35 is displayed when the malfunc-
tion signal is received
ODO OUTPUT
Ignition switch
ON
—
Output value of odometer signal (CAN
communication signal)
TACHO METER
[rpm]
Ignition switch
ON
While driving
Input value of engine speed signal
(CAN communication signal)
NOTE:
8191.875 is displayed when the mal-
function signal is received
FUEL METER
[lit]
Ignition switch
ON
—
Input value of fuel level sensor signal
W TEMP METER
[
°
C]
Ignition switch
ON
—
Input value of engine coolant tempera-
ture signal (CAN communication sig-
nal)
NOTE:
215 is displayed when the malfunction
signal is input
ABS W/L
Ignition switch
ON
ABS warning lamp ON
On
ABS warning lamp OFF
Off
VDC/TCS IND
Ignition switch
ON
VDC OFF indicator lamp ON
On
VDC OFF indicator lamp OFF
Off
SLIP IND
Ignition switch
ON
VDC warning lamp ON
On
VDC warning lamp OFF
Off
BRAKE W/L
Ignition switch
ON
Brake warning lamp ON
On
Brake warning lamp OFF
Off
DOOR W/L
Ignition switch
ON
During door open warning indication
On
Other than the above
Off
TRUNK/GLAS-H
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
HI-BEAM IND
Ignition switch
ON
High beam indicator lamp ON
On
High beam indicator lamp OFF
Off
TURN IND
Ignition switch
ON
Turn signal indicator lamp ON
On
Turn signal indicator lamp OFF
Off
FR FOG IND
Ignition switch
ON
NOTE:
This item is displayed, but cannot be moni-
tored.
Off
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст