Nissan Leaf. Manual — part 108
AV
INSPECTION AND ADJUSTMENT
AV-423
< BASIC INSPECTION >
[NAVIGATION WITH BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Perform “After Replace ECU” or “Manual Configuration” to write vehicle specification. Refer to
FIGURATION (AV CONTROL UNIT) : Work Procedure"
.
>> GO TO 4.
4.
OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course
lines) are normal.
>> WORK END
ADDITIONAL SERVICE WHEN REPLACING AROUND VIEW MONITOR CON-
TROL UNIT
ADDITIONAL SERVICE WHEN REPLACING AROUND VIEW MONITOR CONTROL
UNIT : Description
INFOID:0000000010122643
Perform the calibrating camera image when replacing around view monitor control unit. Refer to
"CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR) : Work Procedure"
.
CONFIGURATION (AV CONTROL UNIT)
CONFIGURATION (AV CONTROL UNIT) : Description
INFOID:0000000010122644
• Since vehicle specifications are not included in the AV control unit after replacement, it is required to write
vehicle specifications with CONSULT.
• Configuration has three functions as follows.
CONFIGURATION (AV CONTROL UNIT) : Work Procedure
INFOID:0000000010122645
1.
WRITE VEHICLE SPECIFICATION
CONSULT Configuration
Write vehicle specification into AV control unit.
To write vehicle specification stored in CONSULT into the AV control unit>>GO TO 2.
To write vehicle specification into the AV control unit by hand>>GO TO 3.
2.
WRITE STORED DATA
CONSULT Configuration
Select “After Replace ECU” in “Read/Write Configuration.” Write data stored in CONSULT with the “Before
Replace ECU” function into the AV control unit.
>> GO TO 4.
3.
MANUALLY WRITE VEHICLE SPECIFICATION
CONSULT Configuration
Perform “Manual Configuration.” Refer to the Configuration List to write vehicle specification into the AV con-
trol unit. Refer to
AV-424, "CONFIGURATION (AV CONTROL UNIT) : Configuration List"
NOTE:
If selection items are not displayed on the CONSULT screen, touch “NEXT.”
Function
Description
Read/Write Configuration
Before Replace ECU
Allows the reading of vehicle specification written in AV control unit
to store the specification in CONSULT.
After Replace ECU
Allows the writing of the vehicle information stored in CONSULT
into the AV control unit.
Manual Configuration
Allows the writing of the vehicle specification into the AV control
unit by hand.
AV-424
< BASIC INSPECTION >
[NAVIGATION WITH BOSE]
INSPECTION AND ADJUSTMENT
>> GO TO 4.
4.
OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course
lines) are normal.
>> WORK END
CONFIGURATION (AV CONTROL UNIT) : Configuration List
INFOID:0000000010122646
CAUTION:
Check vehicle specifications before servicing.
CONFIGURATION (AROUND VIEW MONITOR CONTROL UNIT)
CONFIGURATION (AROUND VIEW MONITOR CONTROL UNIT) : Work Procedure
INFOID:0000000010122647
1.
SAVING VEHICLE SPECIFICATION
-CONSULT Configuration
Perform “Before Replace ECU”, and save the current vehicle specification in CONSULT.
Is the vehicle specification saved normally?
YES
>> GO TO 2.
NO
>> GO TO 4.
2.
REPLACE AROUND VIEW MONITOR CONTROL UNIT
Replace around view monitor control unit. Refer to
AV-502, "Removal and Installation"
>> GO TO 3.
3.
WRITING VEHICLE SPECIFICATION
-CONSULT Configuration
Select “Configuration” or “After Replace ECU”, and write the vehicle specification saved in CONSULT to
around view monitor control unit.
>> GO TO 6.
4.
REPLACE AROUND VIEW MONITOR CONTROL UNIT
Replace around view monitor control unit. Refer to
AV-502, "Removal and Installation"
>> GO TO 5.
5.
WRITE VEHICLE SPECIFICATION
CONSULT Configuration
Select “Manual Configuration”, and write the vehicle specification to around view monitor control unit.
NOTE:
Around view monitor control unit does not have any setting items. Selection of items on “Manual Configura-
tion” screen is not required.
MANUAL SETTING ITEM
Items
Setting value
STEERING
LHD
RHD
SOUND SYSTEM
BASE
BOSE
AV
INSPECTION AND ADJUSTMENT
AV-425
< BASIC INSPECTION >
[NAVIGATION WITH BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
>> GO TO 6.
6.
PERFORM SELF-DIAGNOSIS
CONSULT Self Diagnostic Result
Perform self-diagnosis of CONSULT, and check whether or not DTC U1305 is detected.
Is DTC U1305 detected?
>> GO TO 5.
>> GO TO 7.
7.
OPERATION CHECK
Check that the operation of the around view monitor control unit and camera images (fixed guide lines and
predictive course lines) are normal.
>> WORK END
PREDICTIVE COURSE LINE CENTER POSITION ADJUSTMENT
PREDICTIVE COURSE LINE CENTER POSITION ADJUSTMENT : Description
INFOID:0000000010122648
Adjust the center position of the predictive course line of the rear view monitor if it is shifted.
PREDICTIVE COURSE LINE CENTER POSITION ADJUSTMENT : Work Procedure
INFOID:0000000010122649
1.
DRIVING
Drive the vehicle straight ahead 100 m (328.1 ft) or more at a speed of 30 km/h (18.6 MPH) or more.
>> END
CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR)
CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR) : Description
INFOID:0000000010122650
• Calibration must be performed after removing/replacing the cameras, removing parts (e.g. front grille, door
mirror, and others) mounted on the cameras, or replacing the Around view monitor control unit.
• The use of CONSULT is required to perform calibration or writing of calibration results to the Around view
monitor control unit.
• Align the white lines on the road near the vehicle at the boundary of each camera image by this camera cal-
ibration. The white lines far from the vehicle may not be aligned at the boundary of each camera image. The
farther the line, the greater the difference is.
CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR) : Work Procedure
INFOID:0000000010122651
CALIBRATION FLOWCHART
AV-426
< BASIC INSPECTION >
[NAVIGATION WITH BOSE]
INSPECTION AND ADJUSTMENT
Following the flowchart shown in the figure, perform the calibration.
NOTE:
View in the incomplete calibration state is indicated by “
” on the
around view monitor.
CALIBRATION PROCEDURE
1.
AROUND VIEW MONITOR SCREEN CONFIRMATION
Check that there is no indication of “Incomplete calibration”.
Is the “Incomplete calibration” display visible?
YES
>> GO TO 2.
NO
>> GO TO 4.
2.
CHECK THAT AROUND VIEW MONITOR CONTROL UNIT IS REPLACED
Check that the around view monitor control unit is replaced.
Is the around view monitor control unit replaced?
YES
>> GO TO 3.
NO
>> GO TO 5.
JSNIA4210GB
JSNIA4606ZZ
JSNIA4606ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст