Nissan Leaf. Manual — part 1157
TM-34
< SYSTEM DESCRIPTION >
[ELECTRIC SHIFT]
COMPONENT PARTS
Parking Actuator Relay A
INFOID:0000000010119545
Parking actuator relay A is turned ON by the electric shift control module when the power switch is turned ON
and supplies power to motor coil A located in the parking actuator.
Electric Shift Selector
INFOID:0000000010119546
The electric shift selector consists of the selector lever, electric shift sensor, P position switch and others.
OPERATIONAL CONDITIONS FOR SHIFT
: Hold
: Current shift position
: Be able to shift here
Shift position
Operation/Function
H
(Home position)
The selector lever automatically moves back to
the home position after it is operated.
P
(P position switch)
Completely stop the vehicle and push the P posi-
tion switch on the top of the selector lever while
depressing the brake pedal.
R
While depressing the brake pedal, slide the selec-
tor lever forward along the gate.
N
While depressing the brake pedal, slide the selec-
tor lever to the left and hold it for approx. 1 second.
D/ECO or B
• While depressing the brake pedal, slide the se-
lector lever backward along the gate.
• If the selector lever is slid backward again while
driving in the D position, the vehicle switches to
ECO mode or B position.
• To switch from ECO mode or B position to the D
position driving, slide the selector lever back-
ward again.
• Refer to
for ECO mode and
B position details.
JSDIA4246ZZ
POWER SW
Operation
Vehicle
speed
Stop lamp
switch
Shift position
Remarks
P
R
N
D
ECO/B
OFF/ACC
Selector le-
ver
—
—
—
—
P position
SW
—
—
—
—
ON
(Not driving)
Selector le-
ver
—
ON
—
—
—
• Shifted to N position
even when shifted to R
or D position
• Shift position warning
buzzer: Two short
beeps
—
OFF
—
Shift position warning
buzzer: Two short beeps
P position
SW
—
—
—
—
—
—
READY
Selector le-
ver
—
ON
*
—
—
OFF
—
Shift position warning
buzzer: Two short beeps
P position
SW
5 km/h
(3 MPH)
or less
—
—
5 km/h
(3 MPH)
or more
—
—
Shift position warning
buzzer: Two short beeps
COMPONENT PARTS
TM-35
< SYSTEM DESCRIPTION >
[ELECTRIC SHIFT]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
*: Direct shifting to the ECO mode or B position from the P position is not possible.
Electric Shift Sensor
INFOID:0000000010119547
• The electric shift sensor integrates 6 non-contact sensors (Hall IC)
and transmits ON/OFF signals to the electric shift control module.
• The electric shift control module determines the shift position from the combination of the ON/OFF signals.
P Position Switch
INFOID:0000000010119548
• The P position switch allows direct one-touch switching to the P position from any position while the vehicle
is stopped.
• The P position switch does not have a function to cancel the P position.
• The P position switch transmits the ON/OFF signals of 2 contact switches to the electric shift control module.
Selector Indicator
INFOID:0000000010119549
The selector indicator is located in the finisher area and the lamp for the currently selected shift position illumi-
nates.
Electric Shift Warning Lamp
INFOID:0000000010119550
DESIGN/PURPOSE
JSDIA2935ZZ
Electric shift control
module recognition
position
Selector lever
position
P position
SW
Electric shift sensor
P position SW
No. 1
No. 2
No. 3
No. 4
No. 5
No. 6
No. 1
No. 2
H
H
No push
OFF
OFF
ON
OFF
OFF
ON
OFF
ON
P
H
Push
OFF
OFF
ON
OFF
OFF
ON
ON
OFF
R
R
No push
ON
ON
OFF
OFF
OFF
OFF
OFF
ON
N
N
No push
OFF
ON
ON
ON
OFF
OFF
OFF
ON
D
D
No push
OFF
OFF
OFF
ON
ON
OFF
OFF
ON
Electric shift control
module recognition
position
Selector lever
position
P position
SW
Electric shift sensor
P position SW
No. 1
No. 2
No. 3
No. 4
No. 5
No. 6
No. 1
No. 2
H
H
No push
OFF
OFF
ON
OFF
OFF
ON
OFF
ON
P
H
Push
OFF
OFF
ON
OFF
OFF
ON
ON
OFF
R
R
No push
ON
ON
OFF
OFF
OFF
OFF
OFF
ON
N
N
No push
OFF
ON
ON
ON
OFF
OFF
OFF
ON
D
D
No push
OFF
OFF
OFF
ON
ON
OFF
OFF
ON
TM-36
< SYSTEM DESCRIPTION >
[ELECTRIC SHIFT]
COMPONENT PARTS
The electric shift warning lamp warns the driver of a malfunction in
the electric shift system.
BULB CHECK
For 2 seconds after the ignition switch is turned ON.
SYNCHRONIZATION WITH MASTER WARNING LAMP
Applicable
MWI-31, "MASTER WARNING LAMP : System Description"
for details of master warning lamp.
OPERATION AT COMBNATION METER CNA COMMUNICATION CUT-OFF OR UNUSUAL SIGNAL
For actions on CAN communications blackout in the combination meter, refer to
SYSTEM DIAGRAM
SIGNAL PATH
• The electric shift control module transmits an electric shift warning lamp signal to the controller of VCM
when detecting a malfunction in the electric shift system.
• VCM transmits that signal to combination meter.
• The combination meter turns ON the electric shift warning lamp when receiving an electric shift warning
lamp signal.
LIGHTING CONDITION
• A malfunction is detected in the electric shift system.
• For the relationship between warning lamp and DTC, refer to
.
SHUTOFF CONDITION
Erase DTC
Electric Shift Warning Message
INFOID:0000000010119551
DESIGN/PURPOSE
Electric Shift Warning A
JSDIA3878ZZ
JSDIA4226GB
COMPONENT PARTS
TM-37
< SYSTEM DESCRIPTION >
[ELECTRIC SHIFT]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
This message warns the driver that electric shift system is not nor-
mal.
Electric Shift Warning B
This message warns the driver that electric shift system is not nor-
mal.
Shift Position Warning
This message informs the driver that the selector lever is in between
positions.
SYNCHRONIZATION WITH MASTER WARNING LAMP
Applicable
MWI-31, "MASTER WARNING LAMP : System Description"
for details of master warning lamp.
OPERATION AT COMBNATION METER CNA COMMUNICATION CUT-OFF OR UNUSUAL SIGNAL
For actions on CAN communications blackout in the combination meter, refer to
SYSTEM DIAGRAM
JSDIA4224ZZ
JSDIA4225ZZ
JSDIA4223ZZ
JSDIA4227GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст